DOI QR코드

DOI QR Code

Investigation of touchdown point mismatch during installation for catenary risers

  • Huang, Chaojun (Ocean Engineering Department, Indian Institute of Technology Madras) ;
  • Hu, Guanyu (Ocean Engineering Department, Indian Institute of Technology Madras) ;
  • Yin, Fengjie (Ocean Engineering Department, Indian Institute of Technology Madras)
  • 투고 : 2018.07.17
  • 심사 : 2018.08.12
  • 발행 : 2018.09.25

초록

Meeting the touchdown point (TDP) target box is one of the challenges during catenary riser installation, especially for deep water or ultra-deep water riser systems. TDP location mismatch compared to the design can result in variation of riser configuration, additional hang-off misalignment, and extra bending loads going into the hang-off porch. A good understanding of the key installation parameters can help to minimize this mismatch, and ensure that the riser global response meets the design criteria. This paper focuses on investigating the potential factors that may affect the touchdown point location, and addressing the challenges both in the design stage and during installation campaign. Conventionally, the vessel offset and current are the most critical factors which may affect the TDP movement during installation. With the offshore exploration going deeper and deeper in the sea (up to 10,000ft), other sources such as the seabed slope and seabed soil stiffness are playing an important role as well. The impacts of potential sources are quantified through case studies for steel catenary riser (SCR) and lazy wave steel catenary riser (LWSCR) in deep water application. Investigations through both theoretical study and numerical validation are carried out. Furthermore, design recommendations are provided during execution phase for the TDP mismatch condition to ensure the integrity of the riser system.

키워드

참고문헌

  1. Andrade, E.Q., Aguiar, L.L., Senra, S.F., Siqueira, E.F.N., Torres, A.L.F.L. and Mourelle, M.M. (2010), Optimization Procedure of Steel Lazy Wave Riser Configuration for Spread Moored FPSOs in Deepwater Offshore Brazil, OTC 20777.
  2. Antony, A., Parambath, A., Yue, B., Man, K. and Thethi, R. (2017), Cost Savings Associated with Improved VIM Prediction Accuracy, OTC 27889.
  3. Hoffman, J., Yun, H. and Modi, A. (2010), Parque das Conchas (BS-10) Pipeline, Flowline and Riser System Design, Installation and Challenges, OTC 20650.
  4. Singh, R.R. and Bhatt, M. (2010), Engineering Mathematics, A Tutorial Approach, Tata McGraw Hill Education Private Limited.
  5. Hu, G., Campbell, M. and Huang, C. (2014), Dynamic Plastic Deformation of Deepwater Steel Catenary Risers under Extreme Cyclic Compressive Loading. Oil and Gas Facilities.
  6. Li, S. and Nyuen, C. (2010), Dynamic Response of Deepwater Lazy-Wave Catenary Riser. Deep Offshore Technology International, Amsterdam, Netherlands.
  7. Orcina ltd. (2018), OrcaFlex 10.2a. https://www.orcina.com/Resources/index.php.
  8. Queau, L.M., Kimiaei, M. and Randolph, M.F. (2013), Lazy Wave Catenary Risers: Scaling Factors and Analytical Approximation of The Static Stress Range in The Touchdown Zone. OMAE 10273.
  9. Santala, M.J., Constantinides, Y., Koska, R., Krapf, C. and Walters, D.S. (2017), SCR Life Extension through Managed Shape Change, OTC 27597.
  10. Thomas, B., Benirschke, A. and Sarkar, T. (2010), Parque das Conchas (BC-10) Steel Lazy Wave Riser Installation, Pre-abandonment, Recovery and Transfer Challenges, OTC 20605.
  11. Wang, J., Duan, M., Fan, J. and Liu, Y. (2013), Static Equilibrium Configuration of Deepwater Steel Lazy-Wave Riser, ISOPE TPC157
  12. Yue, B., Campbell, M., Walters, D., Thompson, H. and Raghavan, K. (2010), Improved SCR Design for Dynamic Vessel Applications, OMAE 20406.
  13. Yue, B., Walters, D., Yu, W., Raghavan, K. and Thompson, H. (2011), Lazy Wave SCR on Turret Moored FPSO, ISOPE TPC871.
  14. Yin, F., Cerkovnik M. and Conle A. (2014), Assessment of Fatigue Damage from Variable Amplitude Loads in Risers, ISOPE TPC0128.
  15. Yin, F., Fatemi, A. and Bonnen, J. (2010), "Variable amplitude fatigue behavior and life predictions of case-hardened steels", Int. J. Fatigue, 32, 1126-1135. https://doi.org/10.1016/j.ijfatigue.2009.12.009