DOI QR코드

DOI QR Code

Enhanced least square complex frequency method for operational modal analysis of noisy data

  • Akrami, V. (Faculty of Engineering, University of Mohaghegh Ardabili) ;
  • Zamani, S. Majid (Structural Engineering Department, Road, Housing and Urban Research Center)
  • Received : 2017.09.24
  • Accepted : 2018.06.10
  • Published : 2018.09.25

Abstract

Operational modal analysis is being widely used in aerospace, mechanical and civil engineering. Common research fields include optimal design and rehabilitation under dynamic loads, structural health monitoring, modification and control of dynamic response and analytical model updating. In many practical cases, influence of noise contamination in the recorded data makes it difficult to identify the modal parameters accurately. In this paper, an improved frequency domain method called Enhanced Least Square Complex Frequency (eLSCF) is developed to extract modal parameters from noisy recorded data. The proposed method makes the use of pre-defined approximate mode shape vectors to refine the cross-power spectral density matrix and extract fundamental frequency for the mode of interest. The efficiency of the proposed method is illustrated using an example five story shear frame loaded by random excitation and different noise signals.

Keywords

References

  1. Aras, F. (2016), "Ambient and forced vibration testing with numerical identification for RC buildings", Earthq. Struct., 11(5), 809-822. https://doi.org/10.12989/eas.2016.11.5.809
  2. Au, S.K. (2017), Operational Modal Analysis: Modeling, Bayesian Inference, Uncertainty Laws, Singapore, Springer.
  3. Bonness, W.K. and Jenkins, D.M. (2015), "Removing unwanted noise from operational modal analysis data", Top. Modal Anal., 10, 115-122.
  4. Brincker, R., Ventura, C. and Andersen, P. (2003), "Why outputonly modal testing is a desirable tool for a wide range of practical applications", Proceedings of the International Modal Analysis Conference (IMAC) XXI, Vol. 256.
  5. Gouache, T., Morlier, J., Michon, G. and Coulange, B. (2013), "Operational modal analysis with non stationnary inputs", IOMAC 2013, Guimaraes, Portugal.
  6. Jensen, H.A., Esse, C., Araya, V. and Papadimitriou, C. (2017), "Implementation of an adaptive meta-model for Bayesian finite element model updating in time domain", Reliab. Eng. Syst. Saf., 160, 174-190. https://doi.org/10.1016/j.ress.2016.12.005
  7. Masjedian, M. and Keshmiri, M. (2009), "A review on operational modal analysis researches: classification of methods and applications", Proceedings of the 3rd IOMAC, 707-718.
  8. Mohanty, P. and Rixen, D.J. (2004), "Operational modal analysis in the presence of harmonic excitation", J. Sound Vib., 270(1), 93-109. https://doi.org/10.1016/S0022-460X(03)00485-1
  9. Ni, Y., Lu, X. and Lu, W. (2017), "Operational modal analysis of a high-rise multi-function building with dampers by a Bayesian approach", Mech. Syst. Signal Pr., 86, 286-307. https://doi.org/10.1016/j.ymssp.2016.10.009
  10. Ni, Y.Q., Zhang, F.L., Xia, Y.X. and Au, S.K. (2015), "Operational modal analysis of a long-span suspension bridge under different earthquake events", Earthq. Struct., 8(4), 859-887. https://doi.org/10.12989/eas.2015.8.4.859
  11. Ong, Z.C., Lim, H.C., Khoo, S.Y., Ismail, Z., Kong, K.K. and Rahman, A.G.A. (2017), "Assessment of the phase synchronization effect in modal testing during operation", J. Zhejiang Univ., SCIENCE A, 18(2), 92-105. https://doi.org/10.1631/jzus.A1600003
  12. Papadimitriou, C. and Papadioti, D.C. (2013), "Component mode synthesis techniques for finite element model updating", Comput. Struct., 126, 15-28. https://doi.org/10.1016/j.compstruc.2012.10.018
  13. Peeters, B. and De Roeck, G. (2001), "Stochastic system identification for operational modal analysis: a review", J. Dyn. Syst. Measur. Control, 123(4), 659-667. https://doi.org/10.1115/1.1410370
  14. Peeters, B., Cornelis, B., Janssens, K. and Van der Auweraer, H. (2007), "Removing disturbing harmonics in operational modal analysis", Proceedings of International Operational Modal Analysis Conference, Copenhagen, Denmark.
  15. Qin, S., Wang, Q. and Kang, J. (2015), "Output-only modal analysis based on improved empirical mode decomposition method", Adv. Mater. Sci. Eng., 2015, Article ID 945862, 12.
  16. Rahman, M.S. and Lau, D. (2012), "Comparison of system identification techniques with field vibration data for structural health monitoring of bridges", M.Sc. Dissertation, Carleton University, Ottawa.
  17. Rainieri, C. and Fabbrocino, G. (2014), Operational Modal Analysis of Civil Engineering Structures, Springer, New York.
  18. Reynders, E. (2012), "System identification methods for (operational) modal analysis: review and comparison", Arch. Comput. Meth. Eng., 19(1), 51-124. https://doi.org/10.1007/s11831-012-9069-x
  19. Rodrigues, J., Brincker, R. and Andersen, P. (2004), "Improvement of frequency domain output-only modal identification from the application of the random decrement technique", Proceedings of the 23rd Int. Modal Analysis Conference, Deaborn, MI.
  20. Schanke, S.A. (2015), "Operational modal analysis of large bridges", Master Thesis, NTNU-Norwegian University of Science and Technology.
  21. Shouyuan, Z., Yimin, Z., He, L. and Bangchun, W. (2008), "Identification of noise modes for automobile operational modal analysis", Int. J. Vehicle Noise Vib., 4(4), 304-316. https://doi.org/10.1504/IJVNV.2008.024341
  22. Yu, D.J. and Ren, W.X. (2005), "EMD-based stochastic subspace identification of structures from operational vibration measurements", Eng. Struct., 27(12), 1741-1751. https://doi.org/10.1016/j.engstruct.2005.04.016
  23. Zhang, F.L. and Au, S.K. (2016), "Fundamental two-stage formulation for Bayesian system identification, Part II: Application to ambient vibration data", Mech. Syst. Signal Pr., 66, 43-61.
  24. Zhang, F.L., Ni, Y.C. and Lam, H.F. (2017), "Bayesian structural model updating using ambient vibration data collected by multiple setups", Struct. Control Hlth. Monit., 24(12), e2023. https://doi.org/10.1002/stc.2023
  25. Zhang, F.L., Ni, Y.Q., Ni, Y.C. and Wang, Y.W. (2016), "Operational modal analysis of Canton Tower by a fast frequency domain Bayesian method", Smart Struct. Syst., 17(2), 209-230. https://doi.org/10.12989/sss.2016.17.2.209
  26. Zhang, F.L., Ventura, C.E., Xiong, H.B., Lu, W.S., Pan, Y.X. and Cao, J.X. (2018), "Evaluation of the dynamic characteristics of a super tall building using data from ambient vibration and shake table tests by a Bayesian approach", Struct. Control Hlth. Monit., 25(4), e2121. https://doi.org/10.1002/stc.2121
  27. Zhang, L., Brincker, R. and Andersen, P. (2005), "An overview of operational modal analysis: major development and issues", 1st International Operational Modal Analysis Conference (IOMAC), Copenhagen, Denmark.