Steel and Composite Structures

  • 제28권5호
  • /
  • Pages.573-588
  • /
  • 2018
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Behavior of polygonal concrete-filled steel tubular stub columns under axial loading

  • Zhang, Tao (School of Civil Engineering, Central South University) ;
  • Ding, Fa-xing (School of Civil Engineering, Central South University) ;
  • Wang, Liping (School of Civil Engineering, Central South University) ;
  • Liu, Xue-mei (School of Civil Engineering and Built Environment, Queensland University of Technology) ;
  • Jiang, Guo-shuai (School of Civil Engineering, Central South University)
  • 투고 : 2017.12.30
  • 심사 : 2018.06.25
  • 발행 : 2018.09.10
⟨ 이전 논문 다음 논문 ⟩

초록

The objective of this paper is to investigate the mechanical performances of polygonal concrete-filled circular steel tubular (CFT) stub columns under axial loading through combined experimental and numerical study. A total of 32 specimens were designed to investigate the effect of the concrete strength and steel ratio on the compressive behavior of polygonal CFT stub columns. The ultimate bearing capacity, ductility and confinement effect were analyzed based on the experimental results and the failure modes were discussed in detail. Besides, ABAQUS was adopted to establish the three dimensional FE model. The composite action between the core concrete and steel tube was further discussed and clarified. It was found that the behavior of CFT stub column changes with the change of the cross-section, and the change is continuous. Finally, based on both experimental and numerical results, a unified formula was developed to estimate the ultimate bearing capacity of polygonal CFT stub columns according to the superposition principle with rational simplification. The predicted results showed satisfactory agreement with both experimental and FE results.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Aslani, F., Uy, B., Tao, Z. and Mashiri, F. (2015), "Predicting the axial load capacity of high-strength concrete filled steel tubular columns", Steel Compos. Struct., Int. J., 19(4), 967-993. https://doi.org/10.12989/scs.2015.19.4.967
  2. Baltay, P. and Gjelsvik, A. (1990), "Coefficient of friction for steel on concrete at high normal stress", J. Mater. Civil Eng., 2(1), 46-49. https://doi.org/10.1061/(ASCE)0899-1561(1990)2:1(46)
  3. Chang, X., Ru, Z.L., Zhou, W. and Zhang, Y.B. (2013), "Study on concrete-filled stainless steel carbon steel tubular (CFSCT) stub columns under compression", Thin-Wall. Struct., 63(2), 125-133. https://doi.org/10.1016/j.tws.2012.10.002
  4. Chang, X., Luo, X.L., Zhu, C.X. and Tang, C.N. (2014), "Analysis of circular concrete-filled steel tube support in high ground stress conditions", Tunn. Undergr. Sp Tech., 43(6), 41-48. https://doi.org/10.1016/j.tust.2014.04.002
  5. Dai, X. and Lam, D. (2010), "Numerical modeling of the axial compressive behaviour of short concrete-filled elloptical steel columns", J. Constr. Steel Res., 66, 931-42. https://doi.org/10.1016/j.jcsr.2010.02.003
  6. Ding, F.X., Ying, X.Y., Zhou, L.C. and Yu, Z.W. (2011), "Unified calculation method and its application in determining the uniaxial mechanical properties of concrete", Front. Archit. Civ. Eng. China., 5(3), 381-393. https://doi.org/10.1007/s11709-011-0118-6
  7. Ding, F.X., Fang, C.J., Bai, Y. and Gong, Y.Z. (2014), "Mechanical performance of stirrup-constrained concrete-filled steel tubular stub columns under axial loading", J. Constr. Steel Res., 98(11), 146-157. https://doi.org/10.1016/j.jcsr.2014.03.005
  8. Ding, F.X., Tan, L., Liu, X.M. and Wang, L.P. (2017), "Behavior of circular thin-walled steel tube confined concrete stub columns", Steel Compos. Struct., Int. J., 23(2), 229-238. https://doi.org/10.12989/scs.2017.23.2.229
  9. El-Heweity, M.M. (2012), "On the performance of circular concrete-filled high strength steel columns under axial loading", Alexandria Eng. J., 51(2), 109-119. https://doi.org/10.1016/j.aej.2012.05.006
  10. Ellobody, E. (2013a), "Numerical modeling of fibre reinforced concrete-filled stainless steel tubular columns", Thin-Wall. Struct., 63(2), 1-12. https://doi.org/10.1016/j.tws.2012.10.005
  11. Ellobody, E. (2013b), "Nonlinear behavior of eccentrically loaded FR concrete-filled stainless steel tubular columns", J. Constr. Steel Res, 90(11), 1-12. https://doi.org/10.1016/j.jcsr.2013.07.018
  12. Eurocode 4, European standard (2004), Design of Composite Steel and Concrete Structures Part1-1: General Rules-Structural Rules for Buildings, European Committee for Standardization, Brussels, EN 1994-1-2.
  13. Evirgen, B., Tuncan, A. and Taskin, K. (2014), "Structural behavior of concrete filled steel tubular sections (cft/cfst) under axial compression", Thin-Wall. Struct., 80(9), 46-56. https://doi.org/10.1016/j.tws.2014.02.022
  14. GB/T228-2002, China Standard (2002), Metallic materials-tensile testing at ambient temperatures, Standards Press of China, Beijing, China.
  15. GB/T50081-2002, China Standard (2002), Standard for method of mechanical properties on ordinary concrete, China Building Industry Press, Beijing, China.
  16. GB 50017-2003, China Standard (2003), Code for design of steel structures, China Planning Press, Beijing, China.
  17. GB 5936-2014, China Standard (2014), Technical Code for Concrete Filled Steel Tubular Structures, China Building Industry Press, Beijing, China.
  18. Guo, Z.H. (2003), "Strength and constitutive relation of concrete", Chinese Building Industry Press, Beijing, China.
  19. Hassanein, M.F. and Kharoob, O.F. (2014), "Analysis of circular concrete-filled double skin tubular slender columns with external stainless steel tube", Thin-Wall. Struct., 79(6), 23-37. https://doi.org/10.1016/j.tws.2014.01.008
  20. Hassanein, M.F., Kharoob, O.F. and Liang, Q.Q. (2013), "Circular concrete-filled double skin tubular short columns with external stainless steel tubes under axial compression", Thin-Wall. Struct., 73(12), 252-263. https://doi.org/10.1016/j.tws.2013.08.017
  21. Hibbitt, Karlson & Sorensen Inc. (2003), ABAQUS/standard User's Manual, Version 6.4.1., Pawtucket, RI, USA.
  22. Hua, W., Wang, H.J. and Hasegawa, A. (2014), "Experimental study on reinforced concrete filled circular steel tubular columns", Steel. Compos. Struct., Int. J., 17(4), 517-533. https://doi.org/10.12989/scs.2014.17.4.517
  23. Huang, F.Y., Yu, X.M. and Chen, B.C. (2012), "The structural performance of axially loaded CFST columns under various loading conditions", Steel Compos. Struct., Int. J., 13(5), 451-471. https://doi.org/10.12989/scs.2012.13.5.451
  24. Jamaluddin, N., Lam, D., Dai, X.H. and Ye, J. (2013), "An experimental study on elliptical concrete filled columns under axial compression", J. Constr. Steel Res., 87(8), 6-16. https://doi.org/10.1016/j.jcsr.2013.04.002
  25. Kim, J.K., Kwak, H.G. and Kwak, J.H. (2013), "Behavior of Hybrid Double Skin Concrete Filled Circular Steel Tube Columns", Steel Compos. Struct., Int. J., 14(14), 191-204. https://doi.org/10.12989/scs.2013.14.2.191
  26. Liang, Q.Q. (2017), "Nonlinear analysis of circular double-skin concrete-filled steel tubular columns under axial compression", Eng. Struct., 131, 639-650. https://doi.org/10.1016/j.engstruct.2016.10.019
  27. Liu, J., Ding, F.X., Liu, X.M. and Yu, Z.W. (2016), "Study on flexural capacity of simply supported steel-concrete composite beam", Steel Compos. Struct., Int. J., 21(4), 829-847. https://doi.org/10.12989/scs.2016.21.4.829
  28. Ottosen, N.S. and Ristinmaa, M. (2005), "12-Common Plasticity Models", Mech. Constitut. Model., 279-319.
  29. Pagoulatou, M., Sheehan, T., Dai, X.H. and Lam, D. (2014), "Finite element analysis on the capacity of circular concretefilled double-skin steel tubular (CFDST) stub columns", Eng. Struct., 72, 102-112. https://doi.org/10.1016/j.engstruct.2014.04.039
  30. Park, J.W. and Choi, S.M. (2013), "Structural behavior of CFRP strengthened concrete-filled steel tubes columns under axial compression loads", Steel. Compos. Struct., Int. J., 14(5), 453-472. https://doi.org/10.12989/scs.2013.14.5.453
  31. Tao, Z., Wang, Z.B. and Yu, Q. (2013), "Finite element modelling of concrete-filled steel stub columns under axial compression" J. Constr. Steel Res., 89(5), 121-131. https://doi.org/10.1016/j.jcsr.2013.07.001
  32. Uenaka, K. (2014), "Experimental study on concrete filled elliptical/oval steel tubular stub columns under compression", Thin-Wall. Struct., 78(5), 131-137. https://doi.org/10.1016/j.tws.2014.01.023
  33. Wan, C.Y. and Zha, X.X. (2016), "Nonlinear analysis and design of concrete-filled dual steel tubular columns under axial loading", Steel Compos. Struct., Int. J., 20(3), 571-597. https://doi.org/10.12989/scs.2016.20.3.571
  34. Wang, Q.T. and Chang, X. (2013), "Analysis of concrete-filled steel tubular columns with "T" shaped cross section (CFTTS)", Steel Compos. Struct., Int. J., 15(1), 41-45. https://doi.org/10.12989/scs.2013.15.1.41
  35. Wang, Z.B., Tao, Z., Han, L.H., Uy, B., Lam, D. and Kang, W.H. (2017), "Strength, stiffness and ductility of concrete-filled steel columns under axial compression", Eng. Struct., 135, 209-221. https://doi.org/10.1016/j.engstruct.2016.12.049
  36. Xiamuxi, A. and Hasegawa, A. (2011), "Compression test of RCFT columns with thin-walledsteel tube and high strength concrete", Steel. Compos. Struct., Int. J., 11(5), 391-402. https://doi.org/10.12989/scs.2011.11.5.391
  37. Xu, W., Han, L.H. and Li, W. (2016), "Performance of hexagonal cfst members under axial compression and bending", J. Constr. Steel Res., 123, 162-175. https://doi.org/10.1016/j.jcsr.2016.04.026
  38. Yang, Y., Wang, Y. and Fu, F. (2014), "Effect of reinforcement stiffeners on square concrete-filled steel tubular columns subjected to axial compressive load", Thin-Wall. Struct., 82(9), 132-144. https://doi.org/10.1016/j.tws.2014.04.009
  39. Yuan, W.B. and Yang, J.J. (2013), "Experimental and numerical studies of short concrete-filled double skin composite tube columns under axially compressive loads", J. Constr. Steel Res., 80(1), 23-31. https://doi.org/10.1016/j.jcsr.2012.09.014
  40. Zha, X., Gong, G. and Liu, X. (2013), "Study on behavior of concrete filled elliptical steel tube members part I: short and long columns under axial compression", Adv. Steel Constr., 9(2), 90-107.

피인용 문헌

  1. Axial impact behavior of confined concrete filled square steel tubes using fiber reinforced polymer vol.38, pp.2, 2018, https://doi.org/10.12989/scs.2021.38.2.165
  2. Mechanical behavior of outer square inner circular concrete-filled dual steel tubular stub columns vol.38, pp.3, 2018, https://doi.org/10.12989/scs.2021.38.3.305
  3. Fully nonlinear inelastic analysis of rectangular CFST frames with semi-rigid connections vol.38, pp.5, 2021, https://doi.org/10.12989/scs.2021.38.5.497
  4. Analytical Modelling of LACFCST Stub Columns Subjected to Axial Compression vol.9, pp.9, 2021, https://doi.org/10.3390/math9090948
  5. Confinement Effect and Efficiency of Concentrically Loaded RACFCST Stub Columns vol.15, pp.1, 2018, https://doi.org/10.3390/ma15010154