DOI QR코드

DOI QR Code

Rock fracturing mechanisms around underground openings

  • Shen, Baotang (College of Mining and Safety Engineering, Shandong University of Science and Technology) ;
  • Barton, Nick (Nick Barton & Associates)
  • 투고 : 2017.08.17
  • 심사 : 2018.03.13
  • 발행 : 2018.09.20

초록

This paper investigates the mechanisms of tunnel spalling and massive tunnel failures using fracture mechanics principles. The study starts with examining the fracture propagation due to tensile and shear failure mechanisms. It was found that, fundamentally, in rock masses with high compressive stresses, tensile fracture propagation is often a stable process which leads to a gradual failure. Shear fracture propagation tends to be an unstable process. Several real case observations of spalling failures and massive shear failures in boreholes, tunnels and underground roadways are shown in the paper. A number of numerical models were used to investigate the fracture mechanisms and extents in the roof/wall of a deep tunnel and in an underground coal mine roadway. The modelling was done using a unique fracture mechanics code FRACOD which simulates explicitly the fracture initiation and propagation process. The study has demonstrated that both tensile and shear fracturing may occur in the vicinity of an underground opening. Shallow spalling in the tunnel wall is believed to be caused by tensile fracturing from extensional strain although no tensile stress exists there. Massive large scale failure however is most likely to be caused by shear fracturing under high compressive stresses. The observation that tunnel spalling often starts when the hoop stress reaches $0.4^*UCS$ has been explained in this paper by using the extension strain criterion. At this uniaxial compressive stress level, the lateral extensional strain is equivalent to the critical strain under uniaxial tension. Scale effect on UCS commonly believed by many is unlikely the dominant factor in this phenomenon.

키워드

참고문헌

  1. Addis, M.A., Barton, N., Bandis, S.C. and Henry, J.P. (1990), "Laboratory studies on the stability of vertical and deviated boreholes", Proceedings of the 65th Annual Technical Conference and Exhibition of the Society of Petroleum Engineers, New Orleans, U.S.A., September.
  2. Andersson, C. (2007), "Rock mass response to coupled mechanical thermal loading", Ph.D. Dissertation, Royal Institute of Technology, Stockholm Sweden.
  3. Barton, N. (2006), Rock Quality, Seismic Velocity, Attenuation and Anisotropy, Taylor & Francis Group, London, U.K.
  4. Barton, N. and Grimstad, E. (2014), Q-system-an Illustrated Guide Following Forty Years in Tunnelling, .
  5. Barton, N. and Shen, B. (2017), "Risk of shear failure and extensional failure around over-stressed excavations in brittle rock", J. Rock Mech. Geotech. Eng., 9(2), 210-225. https://doi.org/10.1016/j.jrmge.2016.11.004
  6. Cai, M. and Kaiser, P.K. (2014), "In-situ rock spalling strength near excavation boundaries", Rock Mech. Rock Eng., 47(2), 659-675. https://doi.org/10.1007/s00603-013-0437-0
  7. Chen, M., Yang, S. Q., Zhang, Y.C. and Zang, C.W. (2016), "Analysis of the failure mechanism and support technology for the Dongtan deep coal roadway", Geomech. Eng., 11(3), 401-420. https://doi.org/10.12989/gae.2016.11.3.401
  8. Diederichs, M.S. (2003), "Rock fracture and collapse under low confinement conditions", Rock Mech. Rock Eng., 36(5), 339-381. https://doi.org/10.1007/s00603-003-0015-y
  9. Diederichs, M.S., Kaiser, P.K. and Eberhardt, E. (2004), "Damage initiation and propagation in hard rock during tunnelling and the influence of near-face stress rotation", J. Rock Mech. Min. Sci., 41(5), 785-812. https://doi.org/10.1016/j.ijrmms.2004.02.003
  10. Dresen, G., Stanchits, S. and Rybacki, E. (2010), "Borehole breakout evolution through acoustic emission location analysis", J. Rock Mech. Min. Sci., 47(3), 426-435. https://doi.org/10.1016/j.ijrmms.2009.12.010
  11. Fairhurst, C. and Cook, N.G.W. (1966), "The phenomenon of rock splitting parallel to the direction of maximum compression in the neighbourhood of a surface", Proceedings of the 1st Congress on the International Society of Rock Mechanics, Lisbon, Portugal.
  12. Grimstad, E. and Barton, N. (1993), "Updating the Q-system for NMT", Proceedings of the International Symposium on Sprayed Concrete-Modern Use of Wet Mix Sprayed Concrete for Underground Support, Fagernes, Norway, October.
  13. Hoek, E. and Brown. E.T. (1980), Underground Excavations in Rock, Institution of Mining and Metallurgy, London, U.K., 527.
  14. Huang H., Yang, S.Q. and Zhang, C.S. (2017), "Strength failure behavior of granite containing two holes under Brazilian test", Geomech. Eng., 12(6), 919-933. https://doi.org/10.12989/gae.2017.12.6.919
  15. Jensen, S.S. (2016), "Experimental study of direct tensile strength in sedimentary rocks", M.Sc. Dissertation, Norwegian University of Science and Technology, Trondheim, Norway.
  16. Komurlu, E., Kesimal, A. and Hasanpour, R (2015), "In situ horizontal stress effect on plastic zone around circular underground openings excavated in elastic zones", Geomech. Eng., 8(6), 783-799. https://doi.org/10.12989/gae.2015.8.6.783
  17. Li, S.C., Wang, J.H., Chen, W.Z., Li, L.P., Zhang, Q.Q. and He, P. (2016), "Study on mechanism of macro failure and micro fracture of local nearly horizontal stratum in super-large section and deep buried tunnel", Geomech. Eng., 11(2), 919-933.
  18. Martin, C.D. (1997), "Seventeenth Canadian geotechnical colloquium: The effect of cohesion loss and stress path on brittle rock strength", Can. Geotech. J., 34(5), 698-725. https://doi.org/10.1139/t97-030
  19. Martin, C.D. and Chandler, N.A. (1994). "The progressive fracture of Lac du Bonnet granite", J. Rock Mech. Min. Sci. Geomech. Abstr., 31(6), 643-659. https://doi.org/10.1016/0148-9062(94)90005-1
  20. Martin, C.D., Kaiser, P.K. and McCreath, D.R. (1999), "Hoek-Brown parameters for predicting the depth of brittle failure around tunnels", Can. Geotech. J., 36(1), 136-151. https://doi.org/10.1139/t98-072
  21. NSW Mine Safety Investigation Unit. (2015), Report into the Deaths of James Mitchell and Phillip Grant at the Austar Coal Mine, Paxton, NSW on 15 April 2014, NSW Mine Safety Investigation Unit.
  22. Read, R. and Martin, C.D. (1996), Technical Summary of AECL's Mine-by Experiment Phase 1: Excavation Response, Atomic Energy of Canada Ltd.
  23. Rinne, M. (2008), "Fracture mechanics and subcritical crack growth approach to model time-dependent failure in brittle rock", Ph.D. Dissertation, Helsinki University of Technology, Espoo, Finland.
  24. Shen, B. and Stephansson, O. (1993), "Modification of the Gcriterion of crack propagation in compression", Eng. Fract. Mech., 47(2), 177-189. https://doi.org/10.1016/0013-7944(94)90219-4
  25. Shen, B., Shi, J. and Barton, N. (2018), "An approximate nonlinear modified Mohr-Coulomb shear strength criterion with critical state for intact rocks", J. Rock Mech. Geotech. Eng., 10(4), 645-652. https://doi.org/10.1016/j.jrmge.2018.04.002
  26. Shen, B., Stephansson, O. and Rinne, M. (2014), Modelling Rock Fracturing Processes: A Fracture Mechanics Approach Using FRACOD, Springer, 173.
  27. Shen, B., Stephansson, O., Einstein, H.H. and Ghahreman, B. (1995), "Coalescence of fractures under shear stresses in experiments", J. Geophys. Res., 100(B4), 5975-5990. https://doi.org/10.1029/95JB00040
  28. Siren, T. (2012), Fracture Toughness Properties of Rocks in Olkiluoto: Laboratory Measurements 2008-2009, 2012, Posiva Report 2012-25.
  29. Stacey, T.R. (1981), "A simple extension strain criterion for fracture of brittle rock", J. Rock Mech. Min. Sci. Geomech. Abstr., 18(6), 469-474. https://doi.org/10.1016/0148-9062(81)90511-8
  30. Wang, Z.S., Li, Y., Zhu, W.S., Xue, Y.G., Jiang, B. and Sun, Y.B. (2017), "Field monitoring of splitting failure for surrounding rock masses and applications of energy dissipation model", Geomech. Eng., 12(5), 595-609. https://doi.org/10.12989/gae.2017.12.4.595
  31. Wawersik, W.R. and Fairhurst, C. (1969), "A study of brittle rock fracture in laboratory compression experiments", J. Rock Mech. Min. Sci. Geomech. Abstr., 7(5), 561-575.
  32. Wesseloo, J. and Stacey, T.R. (2016), "A reconsideration of the extension strain criterion for fracture and failure of rock", Rock Mech. Rock Eng., 49(12), 4667-4679. https://doi.org/10.1007/s00603-016-1059-0

피인용 문헌

  1. Experimental simulation investigation of influence of depth on spalling characteristics in circular hard rock tunnel vol.27, pp.3, 2018, https://doi.org/10.1007/s11771-020-4339-5
  2. Effects of water saturation time on energy dissipation and burst propensity of coal specimens vol.24, pp.3, 2018, https://doi.org/10.12989/gae.2021.24.3.205