DOI QR코드

DOI QR Code

Coordinated supporting method of gob-side entry retaining in coal mines and a case study with hard roof

  • Liu, X.S. (State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technology) ;
  • Ning, J.G. (State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technology) ;
  • Tan, Y.L. (State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technology) ;
  • Xu, Q. (State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technology) ;
  • Fan, D.Y. (State Key Laboratory of Coal Resources and Safe Mining, China University of Mining and Technology)
  • Received : 2017.12.11
  • Accepted : 2018.02.27
  • Published : 2018.08.30

Abstract

The coal wall, gob-side backfill, and gangues in goaf, constitute the support system for Gob-side entry retaining (GER) in coal mines. Reasonably allocating and utilizing their bearing capacities are key scientific and technical issues for the safety and economic benefits of the GER technology. At first, a mechanical model of GER was established and a governing equation for coordinated bearing of the coal-backfill-gangue support system was derived to reveal the coordinated bearing mechanism. Then, considering the bearing characteristics of the coal wall, gob-side backfill and gangues in goaf, their quantitative design methods were proposed, respectively. Next, taking the No. 2201 haulage roadway serving the No. 7 coal seam in Jiangjiawan Mine, China, as an example, the design calculations showed that the strains of both the coal wall and gob-side backfill were larger than their allowable strains and the rotational angle of the lateral main roof was larger than its allowable rotational angle. Finally, flexible-rigid composite supporting technology and roof cutting technology were designed and used. In situ investigations showed that the deformation and failure of surrounding rocks were well controlled and both the coal wall and gob-side backfill remained stable. Taking the coal wall, gob-side backfill and gangues in goaf as a whole system, this research takes full consideration of their bearing properties and provides a quantitative basis for design of the support system.

Keywords

Acknowledgement

Supported by : National Natural Science Foundation of China, Shandong Province University

References

  1. Bai, J.B., Zhou, H.Q., Hou, C.J., Tu, X.Z. and Yue, D.Z. (2004), "Development of support technology beside roadway in goafside entry retaining for next sublevel", J. China Univ. Min. Tech., 33(2), 183-186.
  2. Bai, Q.S., Xia, Y.Y., Liu, X.X. and Yang, Z.H. (2012), "Mining roadway support technology based on rheological analysis in Malin coalmine", Energy Procedia, 16, 1129-1134. https://doi.org/10.1016/j.egypro.2012.01.180
  3. Chen, M., Yang, S.Q., Zhang, Y.C. and Zang, C.W. (2016a), "Analysis of the failure mechanism and support technology for the Dongtan deep coal roadway", Geomech. Eng., 11(3), 401-420. https://doi.org/10.12989/gae.2016.11.3.401
  4. Chen, S.J., Wang, H.L., Wang, H.Y., Guo, W.J. and Li, X.S. (2016b), "Strip Coal Pillar Design Based on Estimated Surface Subsidence in Eastern China", Rock Mech. Rock Eng., 49(9), 3829-3838. https://doi.org/10.1007/s00603-016-0988-y
  5. Chen, Y., Bai, J.B., Zhu, T.L., Yan, S., Zhao, S.H. and Li, X.C. (2012), "Mechanisms of roadside support in gob-side entry retaining and its application", Rock Soil Mech., 33(5), 1427-1432.
  6. Chen, Y.L., Meng, Q.B., Xu, G., Wu, H.S. and Zhang, G.M. (2016b), "Bolt-grouting combined support technology in deep soft rock roadway", J. Min. Sci. Technol., 26(5), 777-785. https://doi.org/10.1016/j.ijmst.2016.06.001
  7. Cheng, Y.H., Jiang, F.X., Lin, J.K., Chen, Q.H., Zhang, D. and Feng, F.S. (2012), "Experimental study on gob-side entry retaining by roadside flexible packing under hard roof", J. Min. Safety Eng., 29(6), 757-761.
  8. Du, J.P. and Meng, X.R. (2009), Mining Science, China University of Mining and Technology Press, Xuzhou, China.
  9. Fan, K.G. Liang, H.G. Ma, C.S. and Zang, C.W. (2014), "Non-harmonious deformation controlling of gob-side entry in thin coal seam under dynamic pressure", J. Rock Mech. Geotech. Eng., 6(3), 269-274. https://doi.org/10.1016/j.jrmge.2014.05.001
  10. Feng, X., Zhang, N., He, F., Yang, S. and Zheng, X. (2017), "Implementation of a pretensioned, fully bonded bolting system and its failure mechanism based on acoustic emission: A laboratorial and field study", Geotech. Test. J., 40(6), 978-999.
  11. Gao, F.Q., Stead, D. and Kang, H.P. (2014), "Simulation of roof shear failure in coal mine roadways using an innovative UDEC Trigon approach", Comput. Geotech., 61(3), 33-41. https://doi.org/10.1016/j.compgeo.2014.04.009
  12. Hua, X.Z., Ma, J.F. and Xu, T.J. (2005), "Study on controlling mechanism of surrounding rocks of gob-side entry with combination of roadside reinforced cable supporting and roadway bolt supporting and its application", Chin. J. Rock Mech. Eng., 24(12), 2107-2112.
  13. Hua, Y., Nie, W., Cai, P., Liu, Y., Peng, H. and Liu, Q. (2018), "Pattern characterization concerning spatial and temporal evolution of dust pollution associated with two typical ventilation methods at fully mechanized excavation faces in rock tunnels", Powder Technol., 334, 117-131. https://doi.org/10.1016/j.powtec.2018.04.059
  14. Huang, W.P., Li, C., Zhang, L.W., Yuan, Q., Zheng, Y.S. and Liu, Y. (2018a), "In situ identification of water-permeable fractured zone in overlying composite strata", J. Rock Mech. Min. Sci., 105, 85-97. https://doi.org/10.1016/j.ijrmms.2018.03.013
  15. Huang, W.P., Yuan, Q., Tan, Y.L., Wang, J., Liu, G.L., Qu, G.L. and Li, C. (2018b), "An innovative support technology employing a concrete-filled steel tubular structure for a 1000-mdeep roadway in a high in situ stress field", Tunn. Undergr. Sp. Technol., 73, 26-36. https://doi.org/10.1016/j.tust.2017.11.007
  16. Huang, Y.C. and Sun, H.H. (1997), "Rules of ground pressure and strata control in gateways maintained in goaf", J. China Coal Soc., 22(2), 128-131.
  17. Jiang, B.Y., Wang, L.G., Lu, Y.L., Sun, X.K. and Jin, G. (2016), "Ground pressure and overlying strata structure for a repeated mining face of residual coal after room and pillar mining", J. Min. Sci. Technol., 26(4), 645-652. https://doi.org/10.1016/j.ijmst.2016.05.017
  18. Jiang, L.S., Wang, P., Zhang, P.P., Zheng, P.Q. and Xu, B. (2017), "Numerical analysis of the effects induced by normal faults and dip angles on rock bursts", C. R. Mecanique, 345(10), 690-705. https://doi.org/10.1016/j.crme.2017.06.009
  19. Jiang, Y.D., Wang, H.W., Zhao, Y.X., Zhu, J. and Pang, X.F. (2011), "The influence of roadway backfill on bursting liability and strength of coal pillar by numerical investigation", Procedia Eng., 26, 1125-1143. https://doi.org/10.1016/j.proeng.2011.11.2283
  20. Kang, H.P., Lin, J. and Fan, M.J. (2015), "Investigation on support pattern of a coal mine roadway within soft rocks-a case study", J. Coal Geol., 140(15), 31-40. https://doi.org/10.1016/j.coal.2015.01.003
  21. Komurlu, E., Kesimal A. and Demir, S. (2016), "Experimental and numerical analyses on determination of indirect (splitting) tensile strength of cemented paste backfill materials under different loading apparatus", Geomech. Eng., 10(6), 775-791. https://doi.org/10.12989/gae.2016.10.6.775
  22. Lee, Y.J. (2016), "Determination of tunnel support pressure under the pile tip using upper and lower bounds with a superimposed approach", Geomech. Eng., 11(4), 587-605. https://doi.org/10.12989/gae.2016.11.4.587
  23. Li, H.M. (2000), "Control design of roof rocks for gob-side entry", Chin. J. Rock Mech. Eng., 19(5), 651-654.
  24. Liu, K., Chan, E., Lee, V., Kapitanova, K. and Son, S.H. (2013), "Design and evaluation of token-based reservation for a roadway system", Transport. Res. C Emer. Technol., 26, 184-202. https://doi.org/10.1016/j.trc.2012.09.001
  25. Liu, Q., Nie, W., Hua, Y., Peng, H.T. and Liu, Z.Q. (2018a), "The effects of the installation position of a multi-radial swirling air-curtain generator on dust diffusion and pollution rules in a fully-mechanized excavation face: A case study", Powder Technol., 329, 371-385. https://doi.org/10.1016/j.powtec.2018.01.064
  26. Liu, X.S., Ning, J.G., Tan, Y.L. and Gu, Q.H. (2016), "Damage constitutive model based on energy dissipation for intact rock subjected to cyclic loading", J. Rock Mech. Min. Sci., 85, 27-32. https://doi.org/10.1016/j.ijrmms.2016.03.003
  27. Liu, Y.H., Nie, W., Jin, H., Ma, H., Hua, Y., Cai, P. and Wei, W.L. (2018b), "Solidifying dust suppressant based on modified chitosan and experimental study on its dust suppression performance", Adsorpt. Sci. Technol., 36(1-2), 640-654. https://doi.org/10.1177/0263617417713624
  28. Ma, Z.G., Gong, P., Fan, J.Q., Geng, M.M. and Zhang, G.W. (2011), "Coupling mechanism of roof and supporting wall in GER in fully-mechanized mining with gangue backfilling", Min. Sci. Technol. China, 21(6), 829-833. https://doi.org/10.1016/j.mstc.2011.05.036
  29. Monjezi, M., Hesami, S.M. and Manoj, K. (2011), "Superiority of neural networks for pillar stress prediction in bord and pillar method", Arab. J. Geosci., 4(5): 845-853. https://doi.org/10.1007/s12517-009-0101-x
  30. Nie, W., Wei, W.L., Cai, P., Liu, Z., Liu, Q., Ma, H. and Liu, H. (2018), "Simulation experiments on the controllability of dust diffusion by means of multi-radial vortex airflow", Adv. Powder Technol., 29(3), 835-847. https://doi.org/10.1016/j.apt.2017.12.027
  31. Ning, J.G., Liu, X.S., Tan, J., Gu, Q.H., Tan, Y.L. and Wang, J. (2018), "Control mechanisms and design for a 'coal-backfill-gangue' support system for coal mine gob-side entry retaining", J. Oil Gas Coal Technol., 18(3-4), 444-466. https://doi.org/10.1504/IJOGCT.2018.093132
  32. Ning, J.G., Wang, J., Tan, Y.L., Zhang, L.S. and Bu, T.T. (2017a), "In situ investigations into mining-induced overburden failures in close multiple-seam longwall mining: A case study", Geomech. Eng., 12(4): 657-673. https://doi.org/10.12989/gae.2017.12.4.657
  33. Ning, J.G., Wang, J., Jiang, J.Q., Hu, S.C., Jiang, L.S. and Liu, X.S. (2017b), "Estimation of crack initiation and propagation thresholds of confined brittle coal specimens based on energy dissipation theory", Rock Mech. Rock Eng., 51(1), 119-134.
  34. Schumacher, F.P. and Kim, E. (2014) "Evaluation of directional drilling implication of double layered pipe umbrella system for the coalmine roof support with composite material and beam element methods using FLAC3D", J. Min. Sci., 50(2), 335-338. https://doi.org/10.1134/S1062739114020173
  35. Singh, G.S.P. (2015), "Conventional approaches for assessment of caving behaviour and support requirement with regard to strata control experiences in longwall workings", J. Rock Mech. Geotech. Eng., 7(3), 291-297. https://doi.org/10.1016/j.jrmge.2014.08.002
  36. Sun, H.H., Wu, J. and Qiu, Y.X. (1992), "Rules of ground pressure and strata control in gateways maintained in goaf", J. China Coal Soc., 17(1), 15-21.
  37. Tan, Y.L., Yu, F.H., Ning, J.G. and Zhao, T.B. (2015a), "Design and construction of entry retaining wall along a gob side under hard roof stratum", J. Rock Mech. Min. Sci., 77, 115-121. https://doi.org/10.1016/j.ijrmms.2015.03.025
  38. Tan, Y.L., Liu, X.S., Ning, J.G. and Tian, C.L. (2015b), "Front abutment pressure concentration forecast by monitoring cable-forces in the roof", J. Rock Mech. Min. Sci., 77, 202-207. https://doi.org/10.1016/j.ijrmms.2015.04.002
  39. Tan, Y.L., Liu, X.S., Ning, J.G. and Lu, Y.W. (2017), "In Situ Investigations on failure evolution of overlying strata induced by mining multiple coal seams", Geotech. Test. J., 40(2), 244-257.
  40. Tan, Y.L., Liu, X.S., Shen, B.T., Ning, J.G. and Gu, Q.H. (2018), "New approaches to testing and evaluating the impact capability of coal seam with hard roof and/or floor in coal mines", Geomech. Eng., 14(4), 367-376. https://doi.org/10.12989/GAE.2018.14.4.367
  41. Wang, F.T., Zhang, C., Wei, S.F., Zhang, X.G. and Guo, S.H. (2016), "Whole section anchor-grouting reinforcement technology and its application in underground roadways with loose and fractured surrounding rock", Tunn. Undergr. Sp. Technol., 51, 133-143. https://doi.org/10.1016/j.tust.2015.10.029
  42. Wang, H., Nie, W., Cheng, W.M., Liu, Q. and Jin, H. (2018), "Effects of air volume ratio parameters on air curtain dust suppression in a rock tunnel's fully-mechanized working face", Adv. Powder Technol., 29(2), 230-244. https://doi.org/10.1016/j.apt.2017.11.007
  43. Wang, H.S., Zhang, D.S. and Fan, G.W. (2011a), "Structural effect of a soft-hard backfill wall in a gob-side roadway", Min. Sci. Technol. China, 21(3), 313-318. https://doi.org/10.1016/j.mstc.2011.05.001
  44. Wang, H.W., Poulsen, B.A., Shen, B.T., Xue, S. and Jiang, Y.D. (2011b), "The influence of roadway backfill on the coal pillar strength by numerical investigation", J. Rock Mech. Min. Sci., 48(3), 443-450. https://doi.org/10.1016/j.ijrmms.2010.09.007
  45. Wang, M., Bai, J.B., Li, W.F., Wang, X.Y. and Cao, S.G. (2015), "Failure mechanism and control of deep gob-side entry", Arab. J. Geosci., 8(11), 9117-9131. https://doi.org/10.1007/s12517-015-1904-6
  46. Wu, X., Jiang, Y., Guan, Z. and Wang, G. (2018), "Estimating the support effect of the energy-absorbing rock bolt based on the mechanical work transfer ability", J. Rock Mech. Min. Sci., 103, 168-178. https://doi.org/10.1016/j.ijrmms.2018.01.041
  47. Xue, D.P., Wang, J.P., Tu, H.S., Wang, F.T. and Zhao, J. (2013), "Deformation failure mechanism and application of the backfill along the goaf-side retained roadway", J. Min. Sci. Technol., 23(3), 329-335. https://doi.org/10.1016/j.ijmst.2013.05.019
  48. Yang, D.W., Ma, Z.G., Qi, F.Z., Gong, P., Liu, D.P., Zhao, G.Z. and Zhang, R.R. (2017), "Optimization study on roof break direction of gob-side entry retaining by roof break and filling in thick-layer soft rock layer", Geomech. Eng., 13(2), 195-215. https://doi.org/10.12989/GAE.2017.13.2.195
  49. Yang, H.Y., Cao, S.G., Wang, S.Q., Fan, Y.C., Wang, S. and Chen, X.Z. (2016), "Adaptation assessment of gob-side entry retaining based on geological factors", Eng. Geol., 209, 143-151. https://doi.org/10.1016/j.enggeo.2016.05.016
  50. Ying, X., Jin, C. and Bai, J.B. (2016), "Control of floor heaves with steel pile in gob-side entry retaining", J. Min. Sci. Technol., 26(3), 527-534. https://doi.org/10.1016/j.ijmst.2016.02.024
  51. Zhang, D.S., Ma, L.Q., Miao, X.X. and Dong, G.W. (2006), "Factor analysis on deformation of gob-side entry retaining with entry-in packing in top-coal caving mining face", J. China Univ. Min. Technol., 35(1), 1-6 .
  52. Zhang, G.C., He, F.L., Jia, H.G. and Lai, Y.H. (2017), "Analysis of gateroad stability in relation to yield pillar size: A case study", Rock Mech. Rock Eng., 50(5), 1263-1278. https://doi.org/10.1007/s00603-016-1155-1
  53. Zhang, N., Yuan L., Han C.L., Xue, J.H. and Kan, J.G. (2012), "Stability and deformation of surrounding rock in pillarless gob-side entry retaining", Safety Sci., 50(4), 593-599. https://doi.org/10.1016/j.ssci.2011.09.010
  54. Zhang, Q., Zhang, J.X., Guo, S., Gao, R. and Li, W.K. (2015), "Design and application of solid, dense backfill advanced mining technology with two pre-driving entries" J. Min. Sci. Technol., 25(1), 127-132. https://doi.org/10.1016/j.ijmst.2014.12.008
  55. Zhao, T.B., Fang, K., Wang, L., Zou, J. and Wei, M. (2017a), "Estimation of elastic modulus of rock using modified pointload test", Geotech. Test. J., 40(2), 329-334.
  56. Zhao, T.B., Guo, W.Y., Tan, Y.L., Lu, C.P. and Wang, C.W. (2017b), "Case histories of rock bursts under complicated geological conditions", Bull. Eng. Geol. Environ., 1-17.
  57. Zhao, T.B., Guo, W.Y., Tan, Y.L., Yin, Y.C., Cai, L.S. and Pan, J.F. (2018), "Case studies of rock bursts under complicated geological conditions during multi-seam mining at a depth of 800 m", Rock Mech. Rock Eng., 51(5), 1539-1564. https://doi.org/10.1007/s00603-018-1411-7
  58. Zhang, Z.Z., Bai, J.B., Chen, Y. and Yan, S. (2015), "An innovative approach for gob-side entry retaining in highly gassy fully-mechanized longwall top-coal caving", J. Rock Mech. Min. Sci., 80, 1-11. https://doi.org/10.1016/j.ijrmms.2015.09.001
  59. Zhou, Z.L., Chen, L., Cai, X., Shen, B.T., Zhou, J. and Du, K. (2018), "Experimental investigation of the progressive failure of multiple pillar-roof system", Rock Mech. Rock Eng., 51(5), 1629-1636. https://doi.org/10.1007/s00603-018-1441-1

Cited by

  1. Discussion on stability analysis and support technology of surrounding rock of gob-side entry retaining vol.21, pp.4, 2018, https://doi.org/10.21595/jve.2019.20496
  2. Test of a liquid directional roof-cutting technology for pressure-relief entry retaining mining vol.16, pp.3, 2018, https://doi.org/10.1093/jge/gxz041
  3. Study on Failure Modes and Energy Evolution of Coal-Rock Combination under Cyclic Loading vol.2020, pp.None, 2018, https://doi.org/10.1155/2020/5731721
  4. Impact Dynamic Properties and Energy Evolution of Damaged Sandstone Based on Cyclic Loading Threshold vol.2020, pp.None, 2018, https://doi.org/10.1155/2020/6615602
  5. Effects of Temperature and Water on Mechanical Properties, Energy Dissipation, and Microstructure of Argillaceous Sandstone under Static and Dynamic Loads vol.2020, pp.None, 2018, https://doi.org/10.1155/2020/8827705
  6. Permeability Enhancement of Coal Seam by Lower Protective Layer Mining for Gas Outburst Prevention vol.2020, pp.None, 2018, https://doi.org/10.1155/2020/8878873
  7. Study on Deflection of Surrounding Rock Force Chain and Disaster Mechanism of Instability in Deep Stope vol.2020, pp.None, 2018, https://doi.org/10.1155/2020/8883897
  8. Gob-Side Entry Retaining Technology with Advanced Empty Hole Butterfly-Shaped Weakening in Three-Soft Coal Seam in China vol.2020, pp.None, 2018, https://doi.org/10.1155/2020/2476789
  9. Application of High-Strength Lightweight Concrete in Gob-Side Entry Retaining in Inclined Coal Seam vol.2020, pp.None, 2018, https://doi.org/10.1155/2020/8167038
  10. A caving self-stabilization bearing structure of advancing cutting roof for gob-side entry retaining with hard roof stratum vol.21, pp.1, 2018, https://doi.org/10.12989/gae.2020.21.1.023
  11. Numerical simulation research on response characteristics of surrounding rock for deep super-large section chamber under dynamic and static combined loading condition vol.27, pp.12, 2018, https://doi.org/10.1007/s11771-020-4509-5
  12. Analysis of Energy Dissipation Characteristics of Damaged Sandstone under Impact Load vol.2021, pp.None, 2021, https://doi.org/10.1155/2021/4200452
  13. Mechanical Properties and Energy Dissipation of Sandstone under Cyclic Loading-Unloading vol.2021, pp.None, 2018, https://doi.org/10.1155/2021/8444980
  14. Roadway Support in Deep “Three-Soft” Coal Seam: A Case Study in Yili Mining Area, China vol.2021, pp.None, 2018, https://doi.org/10.1155/2021/8851057
  15. Deformation Law and Control Measures of Gob-Side Entry Filled with Gangue in Deep Gobs: A Case Study vol.2021, pp.None, 2018, https://doi.org/10.1155/2021/9967870
  16. A Large Goaf Group Treatment by means of Mine Backfill Technology vol.2021, pp.None, 2018, https://doi.org/10.1155/2021/3737145
  17. Fracturing mechanisms and deformation characteristics of rock surrounding the gate during gob-side entry retention through roof pre-fracturing vol.148, pp.None, 2021, https://doi.org/10.1016/j.ijrmms.2021.104927