Composites Research

  • 제31권4호
  • /
  • Pages.156-160
  • /
  • 2018
  • /
  • 2288-2103(pISSN)
  • /
  • 2288-2111(eISSN)
한국복합재료학회 (The Korean Society for Composite Materials)
권호 표지
DOI QR코드

DOI QR Code

육각 격자구조를 갖는 콘형 복합재 격자구조체의 구조안전성 평가 기법 연구

Study on Evaluation Method of Structural Integrity for Cone-Type Composite Lattice Structures with Hexagonal Cell

  • Im, Jae-Moon (Graduate School of Mechanical Engineering, Hanbat National University) ;
  • Kang, Seung-Gu (Graduate School of Mechanical Engineering, Hanbat National University) ;
  • Shin, Kwang-Bok (Department of Mechanical Engineering, Hanbat National University) ;
  • Lee, Sang-Woo (Defense & Aerospace Division, Hankuk Fiber Group)
  • 투고 : 2018.08.01
  • 심사 : 2018.08.24
  • 발행 : 2018.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 논문에서는 콘형 복합재 격자구조체의 구조안전성 평가 기법에 대해 연구를 수행하였다. 콘형 복합재격자구조체의 구조안전성 평가는 유한요소해석을 통해 수행되었다. 구조안전성 평가를 위한 유한요소모델은 솔리드 요소를 사용하여 생성하였다. 섬유 교차부와 비교차부의 물성 차이를 고려하기 위해 섬유 체적률을 고려한 기계적 물성을 적용하였다. 구조해석 기법의 검증을 위해 콘형 복합재 격자구조체의 압축 시험을 수행하였다. 시험과 해석의 비교 결과, 약 2%의 변위 오차가 발생하여 잘 일치하는 것을 확인하였다.

In this paper, evaluation method of structural integrity for cone-type composite lattice structures with hexagonal cell was conducted. A finite element analysis was used to evaluate the structural integrity of cone-type composite lattice structure. The finite element model for evaluation of structural integrity was generated using solid element. In order to consider the difference in mechanical properties between intersection and non-intersection part, the mechanical properties were applied considering the fiber volume fraction of each part. Compression test of cone-type composite lattice structure were conducted for verification of evaluation method of structural integrity. The analysis result showed 2% errors in displacement and good agreement with test result.

키워드

참고문헌

  1. Vasiliev, V.V., Barynin, V.A., and Rasin, A.F., "Anisogrid Lattice Structures - Survey of Development and Application," Composite Structures, Vol. 54, 2011, pp. 361-370.
  2. Vasiliev, V.V., and Rasin, A.F., "Anisogrid Composite Lattice Structures for Spacecraft and Aircraft Applications," Composite Structures, Vol. 76, 2006, pp. 182-189. https://doi.org/10.1016/j.compstruct.2006.06.025
  3. Vasiliev, V.V., Barynin, V.A., and Razin, A.F., "Anisogrid Composite Lattice Structures - Development and Aerospace Applications," Composite Structures, Vol. 94, 2012, pp. 1117-1127. https://doi.org/10.1016/j.compstruct.2011.10.023
  4. Barynin, V.A., Bunakov, V.A., Rasin, A.F., and Vasiliev, V.V., "Aerospace Composite Lattice Structure," Proceeding of ICCM, 2009.
  5. Belardo, M., Paletta, N., and Mercurio, U., "Conceptual Design of the Composite Sandwich Fuselage of a Re-Entry Vehicle," Materialwissenschaft und Werkstofftechnik, Vol. 46, No. 4-5, 2015, pp. 420-430. https://doi.org/10.1002/mawe.201500417
  6. Krishan, P.K., and Muruganantham, P., "Design and Analysis of a typical Inter-Tank Structure of a Launch Vehicle using Integrally Stiffened Construction," International Journal of Research in Engineering & Technology, Vol. 1, No. 1, 2013, pp. 21-34.
  7. Querin, O.M., Toporov, V.V., Liu, D., Busch, L.H., et al., "Topology and Parametric Optimization of a Lattice Composite Fuselage Structure," http://www.altairuniversity.com/wpcontent/uploads/2014/04/Topology_and_Parametric_Optimization-ofa-Latice_Composite_Fuselage-_Structure_as_published.pdf, 2014.
  8. Kanou, H., Nabavi, S.M., and Jam, J.E., "Numerical Modeling of Stresses and Buckling Loads of Isogrid Lattice Composite Structure Cylinders," International Journal of Engineering, Science and Technology, Vol. 5, No. 1, 2013, pp. 42-54.
  9. Doh, Y.D., Chung, S.K., Lee, S.W., and Son, J.H., "Design and Fabrication of Filament Wound Composite Lattice Structures," Proceeding of Spring Conference of The Korean Society of Propulsion Engineers, 2010, pp. 421-427.
  10. Doh, Y.D., Chung, S.K., Lee, S.W., and Chang, H.B., "Design and Fabrication of Cone Type Composite Lattice Structures," Proceeding of Spring Conference of the Korean Society of Propulsion Engineers, 2011, pp. 307-311.
  11. Im, J.M., Kang, S.G., Shin, K.B., and Lee, S.W., "Study on Evaluation Method of Structural Integrity of Cylindrical Composite Lattice Structures," Composites Research, Vol. 30, No. 6, 2017, pp. 338-342. https://doi.org/10.7234/COMPOSRES.2017.30.6.338
  12. Im, J.M., Shin, K.B., and Lee, S.W., "Study on Finite Element Modeling Method for Cylindrical Composite Lattice Structures with Hexagonal Cell," Journal of Korean Society for Precision Engineering, Vol. 35, No. 6, 2018, pp. 609-613. https://doi.org/10.7736/KSPE.2018.35.6.609