Steel and Composite Structures

  • 제28권4호
  • /
  • Pages.461-470
  • /
  • 2018
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Vibration analysis of honeycomb sandwich composites filled with polyurethane foam by Taguchi Method

  • Aydin, Muhammet R. (Department of Mechanical Engineering, Igdir University) ;
  • Gundogdu, Omer (Department of Mechanical Engineering, Igdir University)
  • 투고 : 2018.03.14
  • 심사 : 2018.06.04
  • 발행 : 2018.08.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, the effect of polyurethane foam filler, in addition to surface layer thickness and core material thickness, on vibration characteristics of sandwich structures was investigated. The manufacturing process was carried out according to the Taguchi method. The natural frequencies and damping ratios of the produced samples were determined experimentally for fixed-free boundary conditions. In addition, solid models were developed for test samples and their finite element analyses were performed with $ANSYS^{(R)}$ to obtain their natural frequencies and mode shapes. An acceptably good agreement was found with the comparison of experimental results with the numerically obtained ones. The most effective parameters on the vibration characteristics of the sandwich structure were determined by the Taguchi method.

키워드

참고문헌

  1. Ahmad, N., Ranganath, R. and Ghosal, A. (2017), "Modeling and experimental study of a honeycomb beam filled with damping particles", J. Sound Vib., 391, 20-34. https://doi.org/10.1016/j.jsv.2016.11.011
  2. Anoshkin, A.N., Zuiko, V.Y., Alikin, M.A. and Tchugaynova, A.V. (2016), "Numerical Simulation of Mechanical Behavior of Composite Sandwich Panels with Defects", Proceedings of VII European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress), (M. Papadrakakis, V. Papadopoulos, G. Stefanou, V. Plevris Eds.), Crete Island, Greece, June, pp. 7800-7809.
  3. $ANSYS^{(R)}$ (2014), Online Help Documentation, ANSYS Software; ANSYS Inc., Canonsburg, PA, USA.
  4. Assarar, M., El-Mahi, A. and Berthelot, J.M. (2009), "Damping analysis of sandwich composite materials", J. Compos. Mater., 43(13), 1461-1485. https://doi.org/10.1177/0021998308105863
  5. ASTM E 756-04e1 (2004), Standard Test Method for Measuring Vibration Damping Properties of Materials, Book of Standards Volume 04.06, ASTM International, PA, USA.
  6. Aydin, M.R. (2013), "Vibration Analysis of Foam Filled Honeycomb Composite Sandwich Structure", M.Sc. Thesis; Ataturk University, Erzurum, Turkey.
  7. Chuda-Kowalska, M. and Garstecki, A. (2016), "Experimental study of anisotropic behavior of PU foam used in sandwich panels", Steel Compos. Struct., Int. J., 20(1), 43-56. https://doi.org/10.12989/scs.2016.20.1.043
  8. Fang, G., Wang, J., Li, S. and Zhang, S. (2016), "Dynamic characteristics analysis of partial-interaction composite continuous beams", Steel Compos. Struct., Int. J., 21(1), 195-216. https://doi.org/10.12989/scs.2016.21.1.195
  9. Havaldar, S.S. and Sharma, R.S. (2013), "Experimental investigation of dynamic characteristics of multilayer PU foam sandwich panels", J. Minerals Mater. Character. Eng., 1(5), 201-206.
  10. Jung, W.J. and Aref, A.J. (2003), "A combined honeycomb and solid viscoelastic material for structural damping application", Mech. Mater., 53(8), 831-844.
  11. Li, Z. (2011), "Cell size effects on material properties of foamfilled honeycomb sandwich structures using finite element analysis", Acoust. Soc. Am., 12(1), 1-9.
  12. Li, Z. and Crocker, M.J. (2006), "Effects of thickness and delamination on the damping in honeycomb-foam sandwich beams", J. Sound Vib., 294(3), 473-485. https://doi.org/10.1016/j.jsv.2005.11.024
  13. Li, J., Hao, H., Fan, G., Ni, P., Wang, X., Wu, C., Lee, J-M. and Jung, K-H. (2017), "Numerical and experimental verifications on damping identification with model updating and vibration monitoring data", Smart Struct. Syst., Int. J., 20(2), 127-137.
  14. Mead, D.J. (1982), "A comparison of some equations for the flexural vibration of damped sandwich beams", J. Sound Vib., 83(3), 363-377. https://doi.org/10.1016/S0022-460X(82)80099-0
  15. Mozafari, H. and Najafian, S. (2017), "Vibration analysis of foam filled honeycomb sandwich panel - numerical study", Austral. J. Mech. Eng., 1-8. DOI: 10.1080/14484846.2017.1338325
  16. Naresh, C.A., Gopi, C., Kumar, K.S.R. and Chowdary, P.S.B. (2013), "Numerical investigation into effect of cell shape on the behavior of honeycomb sandwich panel", Int. J. Innov. Res. Sci. Eng. Technol., 2(12), 8017-8022.
  17. Nilsson, E. and Nilsson, A.C. (2002), "Prediction and measurement of some dynamic properties of sandwich structures with honeycomb and foam cores", J. Sound Vib., 251(3), 409-430. https://doi.org/10.1006/jsvi.2001.4007
  18. Rao, S.S. (1990), Mechanical Vibrations, (2nd Edition), Addison-Wesley, CA, USA.
  19. Rao, M.D. (2006), "Recent applications of viscoelastic damping for noise control in automobiles and commercial airplanes", J. Sound Vib., 262(3), 457-474. https://doi.org/10.1016/S0022-460X(03)00106-8
  20. Salam, M.A. and Bondok, N.E. (2010), "Free vibration characteristics for different configurations of sandwich beams", IJMME-IJENS, 10(3), 41-54.
  21. Sayed, M.A., Dawood, O.M., Elsayed, A.H. and Daoush, W.R. (2017), "Application of Taguchi method in optimization of process parameters of ODS tungsten heavy alloys", Adv. Mater. Res., 6(1), 79-91. https://doi.org/10.12989/amr.2017.6.1.079
  22. Shahdin, A., Mezeix, L., Bouvet, C., Morliera, J. and Gourinat, Y. (2009), "Fabrication and mechanical testing of glass fiber entangled sandwich beams: A comparison with honeycomb and foam sandwich beams", Compos. Struct., 90(4), 404-412. https://doi.org/10.1016/j.compstruct.2009.04.003
  23. Shin, K.B., Lee, J.Y. and Cho, S.H. (2008), "An experimental study of low-velocity impact responses of sandwich panels for Korean low floor bus", Compos. Struct., 84(3), 228-240. https://doi.org/10.1016/j.compstruct.2007.08.002
  24. Vaidya, A.S., Uddin, N. and Vaidya, U.K. (2009), "Vibration Response of 3-D Space Accessible Sandwich Composite", J. Reinf. Plast. Compos., 18(13), 1587-1599.
  25. Vempati, S. and Mahender, T. (2016), "Modal analysis of honeycomb sandwich panel", Int. J. Res. Eng. Adv. Technol. (IJREAT), 4(5), 14-17.
  26. Wang, B. and Yang, M. (2000), "Damping of honeycomb sandwich beams", J. Mater. Process. Technol., 105(1-2), 67-72. https://doi.org/10.1016/S0924-0136(00)00564-1
  27. Woody, S.C. and Smith, S.T. (2006), "Damping of a thin-walled honeycomb structure using energy absorbing foam", J. Sound Vib., 291(1-2), 491-502. https://doi.org/10.1016/j.jsv.2005.06.001
  28. Yurddaskal, M. and Baba, B.O. (2016), "The effect of curvature on the impact response of foam-based sandwich composite panels", Steel Compos. Struct., Int. J., 20(5), 983-997. https://doi.org/10.12989/scs.2016.20.5.983
  29. Zhang, S.H. and Chen, H.L. (2006), "A study on the damping characteristics of laminated composites with integral viscoelastic layers", Compos. Struct., 74(1), 63-69. https://doi.org/10.1016/j.compstruct.2005.03.008

피인용 문헌

  1. Damping Energy Dissipation and Parameter Identification of the Bellows Structure Covered with Elastic-Porous Metal Rubber vol.2021, pp.None, 2018, https://doi.org/10.1155/2021/8813099
  2. Using Taguchi design of experiments for the optimization of electrospun thermoplastic polyurethane scaffolds vol.10, pp.1, 2021, https://doi.org/10.12989/anr.2021.10.1.059