Steel and Composite Structures

  • 제28권4호
  • /
  • Pages.439-447
  • /
  • 2018
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake

  • Zandi, Yousef (Department of Civil Engineering, Tabriz Branch, Islamic Azad University) ;
  • Shariati, Mahdi (Malaysia-Japan International Institute of Technology, Universiti Teknologi Malaysia) ;
  • Marto, Aminaton (Malaysia-Japan International Institute of Technology, Universiti Teknologi Malaysia) ;
  • Wei, Xing (Department of Bridge Engineering, School of Civil Engineering, Southwest Jiaotong University) ;
  • Karaca, Zeki (Department of Civil Engineering, Karadeniz Technichal University) ;
  • Dao, Duy Kien (Department of Civil Engineering, Ho Chi Minh City University of Technology and Education) ;
  • Toghroli, Ali (Department of Civil Engineering, Faculty of engineering, University of Malaya) ;
  • Hashemi, Mir Heydar (Department of Civil Engineering, Faculty of Engineering, Azarbaijan Shahid Madani University) ;
  • Sedghi, Yadollah (Department of Civil Engineering, Islamic Azad University, Qeshm International Campus) ;
  • Wakil, Karzan (University of Human Development) ;
  • Khorami, Majid (Facultad de Arquitectura y Urbanismo, Universidad Tecnologica Equinoccial, Calle Rumipamba s/n y Bourgeois)
  • 투고 : 2018.02.21
  • 심사 : 2018.06.14
  • 발행 : 2018.08.25
⟨ 이전 논문 다음 논문 ⟩

초록

The structural behaviors of cylindrical barns as a specific engineering structure have been considered as a complicated computing process. The structure design against the earthquake load, to protect by using the code, is an urgency avoiding unexpected damages. The situation has been subjected to the applied design method if there would be no failure across the construction procedures. The purpose of the current study is to clarify the behaviors of cylindrical reinforced concrete barns through the analytic methods across the mass and Lagrangian approaches through the whole outcomes comparison indicating that the isoparametric element obtained from the Lagrangian approach has been successfully applied in the barns earthquake analysis when the slosh effects have been discarded. The form of stress distributions is equal with $s_z$ closed distributions to one another.

키워드

참고문헌

  1. Andalib, Z. (2011), Experimental and Numerical Investigation on the Ductility of Steel Ring Constructed from Steel Plates in Concentric Braces, Semnan University.
  2. Andalib, Z., Kafi, M.A. and Bazzaz, M. (2010), "Using Hyper Elastic Material for Increasing Ductility of Bracing", Proceedings of the 1st Conference of Steel & Structures and 2nd Conference on Application of High-Strength Steels in Structural Industry, Steel & Structures.
  3. Andalib, Z., Kafi, M.A., Bazzaz, M. and Momenzadeh, S. (2018), "Numerical evaluation of ductility and energy absorption of steel rings constructed from plates", Eng. Struct., 169, 94-106. https://doi.org/10.1016/j.engstruct.2018.05.034
  4. Armaghani, D.J., Mohamad, E.T., Momeni, E., Monjezi, M. and Narayanasamy, M.S. (2016), "Prediction of the strength and elasticity modulus of granite through an expert artificial neural network", Arab. J. Geosci., 9(1), 48. https://doi.org/10.1007/s12517-015-2057-3
  5. Bathe, K.-J., Wilson, E.L. and Peterson, F.E. (1974), SAP IV: a structural analysis program for static and dynamic response of linear systems, California Universtiy Press.
  6. Bazzaz, M., Kheyroddin, A., Kafi, M.A. and Andalib, Z. (2012), "Evaluation of the seismic performance of off-centre bracing system with ductile element in steel frames", Steel Compos. Struct., Int. J., 12(5), 445-464. https://doi.org/10.12989/scs.2012.12.5.445
  7. Bazzaz, M., Kafi, M.A., Kheyroddin, A., Andalib, Z. and Esmaeili, H. (2014), "Evaluating the seismic performance of off-centre bracing system with circular element in optimum place", Int. J. Steel Struct., 14(2), 293-304. https://doi.org/10.1007/s13296-014-2009-x
  8. Bazzaz, M., Andaliba, Z., Kafib, M.A. and Kheyroddin, A. (2015a), "Evaluating the performance of OBS-CO in steel frames under monotonic load", Earthq. Struct., Int. J., 8(3), 699-712. https://doi.org/10.12989/eas.2015.8.3.699
  9. Bazzaz, M., Andalib, Z., Kheyroddin, A. and Kafi, M.A. (2015b), "Numerical comparison of the seismic performance of steel rings in off-centre bracing system and diagonal bracing system", Steel Compos. Struct., Int. J., 19(4), 917-937. https://doi.org/10.12989/scs.2015.19.4.917
  10. Dogangun, A., Durmus, A. and Ayvaz, Y. (1996), "Static and dynamic analysis of rectangular tanks by using the Lagrangian fluid finite element", Comput. Struct., 59(3), 547-552. https://doi.org/10.1016/0045-7949(95)00279-0
  11. Fanaie, N. and Dizaj, E.A. (2014), "Response modification factor of the frames braced with reduced yielding segment BRB", Struct. Eng. Mech., Int. J., 50(1), 1-17. https://doi.org/10.12989/sem.2014.50.1.001
  12. Fanaie, N., Aghajani, S. and Shamloo, S. (2012), "Theoretical assessment of wire rope bracing system with soft central cylinder", Proceedings of the 15th World Conference on Earthquake Engineering.
  13. Fanaie, N., Esfahani, F.G. and Soroushnia, S. (2015), "Analytical study of composite beams with different arrangements of channel shear connectors", Steel Compos. Struct., Int. J., 19(2), 485-501. https://doi.org/10.12989/scs.2015.19.2.485
  14. Fanaie, N., Aghajani, S. and Dizaj, E.A. (2016), "Theoretical assessment of the behavior of cable bracing system with central steel cylinder", Adv. Struct. Eng., 19(3), 463-472. https://doi.org/10.1177/1369433216630052
  15. Gholhaki, M., Mohammad, B., Mousavian, M. and Shojaei, B. (2008), "Seismic Behavior of Eccentric Braced System", Proceedings of the 14th International Civil Engineering Student Conference, Volume 14, Semnan, Iran, 1-10.
  16. Hangai, Y., Suzuki, T. and Ohmori, H. (1983), "Static and Dynamic Behaviours of Silo Group Under Earthquake Loadings", Bulletin of Earthquake Resistant Structure Research Center, 16, 77-91.
  17. Housner, G.W. (1957), "Dynamic pressures on accelerated fluid containers", Bulletin of the Seismological Society of America, 47(1), 15-35.
  18. Keyvanfar, A., Shafaghat, A., Abd Majid, M.Z., Bin Lamit, H., Warid Hussin, M., Binti Ali, K.N. and Dhafer Saad, A. (2014), "User satisfaction adaptive behaviors for assessing energy efficient building indoor cooling and lighting environment", Renew. Sustain. Energy Rev., 39, 277-295. https://doi.org/10.1016/j.rser.2014.07.094
  19. Khanouki, M.M.A., Ramli Sulong, N.H., Shariati, M. and Tahir, M.M. (2016), "Investigation of through beam connection to concrete filled circular steel tube (CFCST) column", J. Constr. Steel Res., 121, 144-162. https://doi.org/10.1016/j.jcsr.2016.01.002
  20. Khorami, M., Khorami, M., Motahar, H., Alvansazyazdi, M., Shariati, M., Jalali, A. and Tahir, M. (2017a), "Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis", Struct. Eng. Mech., Int. J., 63(2), 259-268.
  21. Khorami, M., Alvansazyazdi, M., Shariati, M., Zandi, Y., Jalali, A. and Tahir, M. (2017b), "Seismic performance evaluation of buckling restrained braced frames (BRBF) using incremental nonlinear dynamic analysis method (IDA)", Earthq. Struct., Int. J., 13(6), 531-538.
  22. Khorramian, K., Maleki, S., Shariati, M., Jalali, A. and Tahir, M.M. (2017), "Numerical analysis of tilted angle shear connectors in steel-concrete composite systems", Steel Compos. Struct., Int. J., 23(1), 67-85. https://doi.org/10.12989/scs.2017.23.1.067
  23. Li, C., Zhang, Y., Tu, W., Jun, C., Liang, H. and Yu, H. (2017), "Soft measurement of wood defects based on LDA feature fusion and compressed sensor images", J. Forestry Res., 28(6), 1285-1292. https://doi.org/10.1007/s11676-017-0395-6
  24. Mansouri, I. and Kisi, O. (2015), "Prediction of debonding strength for masonry elements retrofitted with FRP composites using neuro fuzzy and neural network approaches", Compos. Part B: Eng., 70, 247-255. https://doi.org/10.1016/j.compositesb.2014.11.023
  25. Mansouri, I., Safa, M., Ibrahim, Z., Kisi, O., Tahir, M., Baharom, S. and Azimi, M. (2016), "Strength prediction of rotary brace damper using MLR and MARS", Struct. Eng. Mech., Int. J., 60(3), 471-488. https://doi.org/10.12989/sem.2016.60.3.471
  26. Mohammadhassani, M., Suhatril, M., Shariati, M. and Ghanbari, F. (2014a), "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., Int. J., 48(6), 833-848.
  27. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2014b), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Syst., Int. J, 14(5), 785-809. https://doi.org/10.12989/sss.2014.14.5.785
  28. Priestley, M., Davidson, B., Honey, G., Hopkins, D., Martin, R., Ramsey, G., Vessey, J. and Wood, J. (1986), "Seismic design of storage tanks", Recommendations of a Study Group of the New Zealand National Society for Earthquake Engineering, Volume 3.
  29. Rammerstorfer, F.G., Scharf, K. and Fischer, F. (1990), "Storage tanks under earthquake loading", Appl. Mech. Rev., 43(11), 261-283. https://doi.org/10.1115/1.3119154
  30. Rehab, I., Tian, X., Gu, F. and Ball, A.D. (2018), "The influence of rolling bearing clearances on diagnostic signatures based on a numerical simulation and experimental evaluation", Int. J. Hydromechatronics, 1(1), 16-46. https://doi.org/10.1504/IJHM.2018.090304
  31. Safa, M., Shariati, M., Ibrahim, Z., Toghroli, A., Baharom, S.B., Nor, N.M. and Petkovic, D. (2016), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steelconcrete composite beam's shear strength", Steel Compos. Struct., Int. J., 21(3), 679-688. https://doi.org/10.12989/scs.2016.21.3.679
  32. Shah, S.N.R., Ramli Sulong, N.H., Khan, R., Jumaat, M.Z. and Shariati, M. (2016), "Behavior of industrial steel rack connections", Mech. Syst. Signal Process., 70, 725-740.
  33. Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2010), "Experimental and analytical study on channel shear connectors in light weight aggregate concrete", Proceedings of the 4th International Conference on Steel & Composite Structures, Sydney, Australia, July.
  34. Shariati, M., Ramli Sulong, N.H., Shariati, A. and Khanouki, M.A. (2015), "Behavior of V-shaped angle shear connectors: Experimental and parametric study", Mater. Struct., 49(9), 3909-3926.
  35. Takin, K., Hashemi, B.H. and Nekooei, M. (2016), "The relationship between time-varying eccentricity of load with the corner lateral displacement response of steel structure during an earthquake", Steel Compos. Struct., Int. J., 20(4), 801-812. https://doi.org/10.12989/scs.2016.20.4.801
  36. Toghroli, A., Mohammadhassani, M., Suhatril, M., Shariati, M. and Ibrahim, Z. (2014), "Prediction of shear capacity of channel shear connectors using the ANFIS model", Steel Compos. Struct., Int. J., 17(5), 623-639. https://doi.org/10.12989/scs.2014.17.5.623
  37. Wang, Z., Xie, Z. and Huang, W. (2018), "A pin-moment model of flexoelectric actuators", Int. J. Hydromechatronics, 1(1), 72-90. https://doi.org/10.1504/IJHM.2018.090306
  38. Westergaard, H.M. (1933), "Water pressures on dams during earthquakes", Trans. ASCE, 95, 418-433.
  39. Yang, K.-H., Byun, H.-Y. and Ashour, A.F. (2009), "Shear strengthening of continuous reinforced concrete T-beams using wire rope units", Eng. Struct., 31(5), 1154-1165. https://doi.org/10.1016/j.engstruct.2009.01.003
  40. Zahrai, S.M. (2015), "Cyclic testing of chevron braced steel frames with IPE shear panels", Steel Compos. Struct., Int. J., 19(5), 1167-1184. https://doi.org/10.12989/scs.2015.19.5.1167
  41. Zahrai, S.M., Moradi, A. and Moradi, M. (2015), "Using friction dampers in retrofitting a steel structure with masonry infill panels", Steel Compos. Struct., Int. J., 19(2), 309-325. https://doi.org/10.12989/scs.2015.19.2.309

피인용 문헌

  1. Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS) vol.34, pp.1, 2018, https://doi.org/10.12989/scs.2020.34.1.155
  2. Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines vol.34, pp.3, 2018, https://doi.org/10.12989/scs.2020.34.3.347
  3. Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines vol.34, pp.3, 2018, https://doi.org/10.12989/scs.2020.34.3.377
  4. The effect of RBS connection on energy absorption in tall buildings with braced tube frame system vol.34, pp.3, 2018, https://doi.org/10.12989/scs.2020.34.3.393
  5. Computational estimation of the earthquake response for fibre reinforced concrete rectangular columns vol.34, pp.5, 2018, https://doi.org/10.12989/scs.2020.34.5.743
  6. Elevated temperature resistance of concrete columns with axial loading vol.9, pp.4, 2018, https://doi.org/10.12989/acc.2020.9.4.355
  7. LMI based criterion for reinforced concrete frame structures vol.9, pp.4, 2020, https://doi.org/10.12989/acc.2020.9.4.407
  8. Computational analysis of three dimensional steel frame structures through different stiffening members vol.35, pp.2, 2018, https://doi.org/10.12989/scs.2020.35.2.187
  9. Influence of porosity and cement grade on concrete mechanical properties vol.10, pp.5, 2018, https://doi.org/10.12989/acc.2020.10.5.393
  10. A Novel Intelligent ELM-BBO Technique for Predicting Distance of Mine Blasting-Induced Flyrock vol.29, pp.6, 2020, https://doi.org/10.1007/s11053-020-09676-6
  11. Prediction of total sediment load: A case study of Wadi Arbaat in eastern Sudan vol.26, pp.6, 2018, https://doi.org/10.12989/sss.2020.26.6.781
  12. Modified algorithmic LMI design with applications in aerospace vehicles vol.8, pp.1, 2018, https://doi.org/10.12989/aas.2021.8.1.069
  13. Optimized AI controller for reinforced concrete frame structures under earthquake excitation vol.11, pp.1, 2021, https://doi.org/10.12989/acc.2021.11.1.001
  14. Assessment of microstructure and surface effects on vibrational characteristics of public transportation vol.11, pp.1, 2021, https://doi.org/10.12989/anr.2021.11.1.101
  15. Smart estimation of automatic approach in enhancing the road safety under AASHTO Standard specification and STM vol.79, pp.3, 2021, https://doi.org/10.12989/sem.2021.79.3.389
  16. Experimental study of reversal of multidrug resistance in human leukemia K562/DOX cells by toad venom vol.11, pp.2, 2018, https://doi.org/10.12989/anr.2021.11.2.219
  17. Application of multi-hybrid metaheuristic algorithm on prediction of split-tensile strength of shear connectors vol.28, pp.2, 2018, https://doi.org/10.12989/sss.2021.28.2.167