Computers and Concrete

  • 제22권2호
  • /
  • Pages.197-207
  • /
  • 2018
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

GMDH-based prediction of shear strength of FRP-RC beams with and without stirrups

  • Kaveh, Ali (Centre of Excellence for Fundamental Studies in Structural Engineering, Iran University of Science and Technology) ;
  • Bakhshpoori, Taha (Faculty of Technology and Engineering, Department of Civil Engineering, East of Guilan, University of Guilan) ;
  • Hamze-Ziabari, Seyed Mahmood (Centre of Excellence for Fundamental Studies in Structural Engineering, Iran University of Science and Technology)
  • 투고 : 2017.07.13
  • 심사 : 2018.06.15
  • 발행 : 2018.08.25
⟨ 이전 논문 다음 논문 ⟩

초록

In the present study, group method of data handling networks (GMDH) are adopted and evaluated for shear strength prediction of both FRP-reinforced concrete members with and without stirrups. Input parameters considered for the GMDH are altogether 12 influential geometrical and mechanical parameters. Two available and very recently collected comprehensive datasets containing 112 and 175 data samples are used to develop new models for two cases with and without shear reinforcement, respectively. The proposed GMDH models are compared with several codes of practice. An artificial neural network (ANN) model and an ANFIS based model are also developed using the same databases to further assessment of GMDH. The accuracy of the developed models is evaluated by statistical error parameters. The results show that the GMDH outperforms other models and successfully can be used as a practical and effective tool for shear strength prediction of members without stirrups ($R^2=0.94$) and with stirrups ($R^2=0.95$). Furthermore, the relative importance and influence of input parameters in the prediction of shear capacity of reinforced concrete members are evaluated through parametric and sensitivity analyses.

키워드

참고문헌

  1. 440, A.C. (2007), Guide for the Design and Construction of Structural Concrete Reinforced with FRP Bars.
  2. Amanifard, N., Nariman-Zadeh, N., Farahani, M. and Khalkhali, A. (2008), "Modelling of multiple short-length-scale stall cells in an axial compressor using evolved GMDH neural networks", Energy Convers. Manage., 49(10), 2588-2594. https://doi.org/10.1016/j.enconman.2008.05.025
  3. Bashir, R. and Ashour, A. (2012), "Neural network modelling for shear strength of concrete members reinforced with FRP bars", Compos. Part B: Eng., 43(8), 3198-3207. https://doi.org/10.1016/j.compositesb.2012.04.011
  4. Bulut, N., Anil, O. and Belgin, C.M. (2011), "Nonlinear finite element analysis of RC beams strengthened with CFRP strip against shear", Comput. Concrete, 8(6), 717-733. https://doi.org/10.12989/cac.2011.8.6.717
  5. C.S.A. (2006), Canadian Highway Bridge Design Code, Canadian Standards Association (CSA), Toronto.
  6. C.S.A. (2012), Design and Construction of Buildings Components with Fiber-Reinforced Polymers, Toronto.
  7. Campana, S., Fernandez Ruiz, M., Anastasi, A. and Muttoni, A. (2013), "Analysis of shear-transfer actions on one-way RC members based on measured cracking pattern and failure kinematics", Mag. Concrete Res., 1-19.
  8. Chowdhury, M.A. and Islam, M.M. (2015), "Shear strength prediction of FRP-reinforced concrete beams: A state-of the-art review of available models", J. Civil Environ. Eng., 5(5), 186.
  9. Council, I.R. (2007), Guide for the Design and Construction of Concrete Structures Reinforced with Fiber-Reinforced Polymer Bars, Rome.
  10. Deitz, D.H., Harik, I.E. and Gesund, H. (1999), "One-way slabs reinforced with glass fiber reinforced polymer reinforcing bars, fiber reinforced polymer reinforcement for reinforced concrete structures", Eds. Dolan, C.W., et al., Proceedings of the 4-th International Conference, SP-188, Farmington Hills, Mich, American Concrete Institute.
  11. El-Chabib, H., Nehdi, M. and Said, A. (2005), "Predicting shear capacity of NSC and HSC slender beams without stirrups using artificial intelligence", Comput. Concrete, 2(1), 79-96. https://doi.org/10.12989/cac.2005.2.1.079
  12. GangaRao, H.V., Taly, N. and Vijay, P. (2006), Reinforced Concrete Design with FRP Composites, CRC Press.
  13. Golafshani, E.M. and Ashour, A. (2016), "A feasibility study of BBP for predicting shear capacity of FRP reinforced concrete beams without stirrups", Adv. Eng. Softw., 97, 29-39. https://doi.org/10.1016/j.advengsoft.2016.02.007
  14. Golafshani, E.M., Rahai, A. and Sebt, M.H. (2015), "Artificial neural network and genetic programming for predicting the bond strength of GFRP bars in concrete", Mater. Struct., 48(5), 1581-1602. https://doi.org/10.1617/s11527-014-0256-0
  15. Golafshani, E.M., Rahai, A., Sebt, M.H. and Akbarpour, H. (2012), "Prediction of bond strength of spliced steel bars in concrete using artificial neural network and fuzzy logic", Constr. Build. Mater., 36, 411-418. https://doi.org/10.1016/j.conbuildmat.2012.04.046
  16. Hoque, M.M. (2006), "3D nonlinear mixed finite-element analysis of RC beams and plates with and without FRP reinforcement", University of Manitoba
  17. Hoult, N., Sherwood, E., Bentz, E.C. and Collins, M.P. (2008), "Does the use of FRP reinforcement change the one-way shear behavior of reinforced concrete slabs?", J. Compos. Constr., 12(2), 125-133. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:2(125)
  18. Ivakhnenko, A. (1971), "Polynomial theory of complex systems", IEEE Tran. Syst. Man Cyber., 4, 364-378.
  19. Ivakhnenko, A.G. and Ivakhnenko, G.A. (2000), "Problems of further development of the group method of data handling algorithms. Part I", Pattern Recognition and Image Analysis C/C Of Raspoznavaniye Obrazov I Analiz Izobrazhenii, 10(2), 187-194.
  20. J.S.o.C.E. (1997), Recommendation for Design and Construction of Concrete Structures using Continuous Fiber Reinforcing Materials, Tokyo.
  21. Jnaid, F. and Aboutaha, R. (2013), "Review of design parameters for FRP-RC members detailed according to ACI 440.1 R-06", Comput. Concrete, 11(2), 105-121. https://doi.org/10.12989/cac.2013.11.2.105
  22. Kara, I.F. (2011), "Prediction of shear strength of FRP-reinforced concrete beams without stirrups based on genetic programming", Adv. Eng. Softw., 42(6), 295-304. https://doi.org/10.1016/j.advengsoft.2011.02.002
  23. Kaveh, A., Bakhshpoori, T. and Hamze-Ziabari, S. (2016), "Derivation of new equations for prediction of principal groundmotion parameters using M5' algorithm", J. Earthq. Eng., 20(6), 910-930. https://doi.org/10.1080/13632469.2015.1104758
  24. Kaveh, A., Bakhshpoori, T. and Hamze-Ziabari, S. (2017), "New model derivation for the bond behavior of NSM FRP systems in concrete", Iran. J. Sci. Technol., Tran. A, 41(3), 249-262.
  25. Kaveh, A., Hamze-Ziabari, S. and Bakhshpoori, T. (2016), "Patient rule-induction method for liquefaction potential assessment based on CPT data", Bull. Eng. Geol. Environ., 77(2), 849-865.
  26. Kaveh, A., Hamze-Ziabari, S.M. and Bakhshpoori, T. (2017), "M5' algorithm for shear strength prediction of HSC slender beams without web reinforcement", Int. J. Model. Optim., 7(1), 48-53.
  27. Lee, S. and Lee, C. (2014), "Prediction of shear strength of FRPreinforced concrete flexural members without stirrups using artificial neural networks", Eng. Struct., 61 99-112. https://doi.org/10.1016/j.engstruct.2014.01.001
  28. Liang, J., Deng, Y., Hu, M. and Tang, D. (2017), "Cyclic performance of concrete beams reinforced with CFRP prestressed prisms", Comput. Concrete, 19(3), 227-232. https://doi.org/10.12989/cac.2017.19.3.227
  29. Machial, R., Alam, M.S. and Rteil, A. (2012), "Revisiting the shear design equations for concrete beams reinforced with FRP rebar and stirrup", Mater. Struct., 45(11), 1593-1612. https://doi.org/10.1617/s11527-012-9859-5
  30. Madandoust, R., Bungey, J.H. and Ghavidel, R. (2012), "Prediction of the concrete compressive strength by means of core testing using GMDH-type neural network and ANFIS models", Comput. Mater. Sci., 51(1), 261-272. https://doi.org/10.1016/j.commatsci.2011.07.053
  31. Najafzadeh, M., Barani, G.A. and Hessami-Kermani, M.R. (2015), "Evaluation of GMDH networks for prediction of local scour depth at bridge abutments in coarse sediments with thinly armored beds", Ocean Eng., 104, 387-396. https://doi.org/10.1016/j.oceaneng.2015.05.016
  32. Nasrollahzadeh, K. and Basiri, M.M. (2014), "Prediction of shear strength of FRP reinforced concrete beams using fuzzy inference system", Expert Syst. Appl., 41(4), 1006-1020. https://doi.org/10.1016/j.eswa.2013.07.045
  33. Nehdi, M., El Chabib, H. and Said, A.A. (2007), "Proposed shear design equations for FRP-reinforced concrete beams based on genetic algorithms approach", J. Mater. Civil Eng., 19(12), 1033-1042. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:12(1033)
  34. Oller, E., Mari, A., Bairan, J.M. and Cladera, A. (2015), "Shear design of reinforced concrete beams with FRP longitudinal and transverse reinforcement", Compos. Part B: Eng., 74 104-122. https://doi.org/10.1016/j.compositesb.2014.12.031
  35. Ramirez, J.A., French, C., Adebar, P., Bonacci, J. and Collins, M. (1998), "Recent approaches to shear design of structural concrete", J. Struct. Eng., 124(12), 1374.
  36. Razaqpur, A.G. and Spadea, S. (2014), "Shear strength of FRP reinforced concrete members with stirrups", J. Compos. Constr., 19(1), 04014025. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000483
  37. Sahay, R.R. and Dutta, S. (2009), "Prediction of longitudinal dispersion coefficients in natural rivers using genetic algorithm", Hydrol. Res., 40(6), 544-552. https://doi.org/10.2166/nh.2009.014
  38. Sas, G., Taljsten, B., Barros, J., Lima, J. and Carolin, A. (2009), "Are available models reliable for predicting the FRP contribution to the shear resistance of RC beams?", J. Compos. Constr., 13(6), 514-534. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000045
  39. See, L. and Openshaw, S. (1999), "Applying soft computing approaches to river level forecasting", Hydrol. Sci. J., 44(5), 763-778. https://doi.org/10.1080/02626669909492272
  40. Shahnewaz, M., Machial, R., Alam, M.S. and Rteil, A. (2016), "Optimized shear design equation for slender concrete beams reinforced with FRP bars and stirrups using genetic algorithm and reliability analysis", Eng. Struct., 107, 151-165. https://doi.org/10.1016/j.engstruct.2015.10.049
  41. Smith, G.N. (1986), Probability and Statistics in Civil Engineering, Collins London
  42. Smith, S.T. and Teng, J.G. (2002), "FRP-strengthened RC beams. I: review of debonding strength models", Eng. Struct., 24(4), 385-395. https://doi.org/10.1016/S0141-0296(01)00105-5
  43. Srinivasan, D. (2008), "Energy demand prediction using GMDH networks", Neurocomput., 72(1), 625-629. https://doi.org/10.1016/j.neucom.2008.08.006
  44. Tureyen, A. and Frosch, R.J. (2003), "Concrete shear strength: another perspective", ACI Struct. J., 100(5), 609-615.
  45. Zhang, T., Oehlers, D.J. and Visintin, P. (2014), "Shear strength of FRP RC beams and one-way slabs without stirrups", J. Compos. Constr., 18(5), 04014007. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000469

피인용 문헌

  1. Data-driven method of damage detection using sparse sensors installation by SEREPa vol.9, pp.4, 2018, https://doi.org/10.1007/s13349-019-00345-8
  2. An effective method for damage assessment based on limited measured locations in skeletal structures vol.24, pp.1, 2018, https://doi.org/10.1177/1369433220947193
  3. Discharge coefficient estimation for rectangular side weir using GEP and GMDH methods vol.6, pp.2, 2018, https://doi.org/10.12989/acd.2021.6.2.135