Smart Structures and Systems

  • 제22권2호
  • /
  • Pages.167-174
  • /
  • 2018
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Lifetime prediction of optocouplers in digital input and output modules based on bayesian tracking approaches

  • Shin, Insun (Department of System Design and Control Engineering, Ulsan National Institute of Science and Technology) ;
  • Kwon, Daeil (School of Mechanical, Aerospace and Nuclear Engineering, Ulsan National Institute of Science and Technology)
  • 투고 : 2017.05.08
  • Accepted : 2018.03.19
  • Published : 2018.08.25
⟨ 이전 논문 다음 논문 ⟩

Abstract

Digital input and output modules are widely used to connect digital sensors and actuators to automation systems. Digital I/O modules provide flexible connectivity extension to numerous sensors and actuators and protect systems from high voltages and currents by isolation. Components in digital I/O modules are inevitably affected by operating and environmental conditions, such as high voltage, high current, high temperature, and temperature cycling. Because digital I/O modules transfer signals or isolate the systems from unexpected voltage and current transients, their failures may result in signal transmission failures and damages to sensitive circuitry leading to system malfunction and system shutdown. In this study, the lifetime of optocouplers, one of the critical components in digital I/O modules, was predicted using Bayesian tracking approaches. Accelerated degradation tests were conducted for collecting the critical performance parameter of optocouplers, current transfer ratio (CTR), during their lifetime. Bayesian tracking approaches, including extended Kalman filter and particle filter, were applied to predict the failure. The performance of each prognostic algorithm was then compared using accuracy and robustness-based performance metrics.

Keywords

Acknowledgement

Supported by : National Research Foundation of Korea (NRF)

References

  1. Authen, S. and Holmberg, J.E. (2012), "Reliability analysis of digital systems in a probailistic risk analysis for nuclear power plants", Nuclear Eng. Technol., 44(5), 471-482. https://doi.org/10.5516/NET.03.2012.707
  2. Black, J.R. (1969), "Electromigration failure modes in aluminum metallization for semiconductor devices", Proceedings of the IEEE, 57(9),1587-1594. https://doi.org/10.1109/PROC.1969.7340
  3. Black, J.R. (1974), "Physics of electromigration", Reliability Physics Symposium, Las Vegas, NV.
  4. Brown, K. (2004), Metal Oxide Varistor Degradation, International Association Electrical Inspectors.
  5. Chiu, T.C., Zeng, K., Stierman, R., Edwards, D. and Ano, K. (2004), "Effect of thermal aging on board level drop reliability for Pb-free BGA packages", Proceedings of the 54th Electronic Components and Technology Conference, La Vegas, NV: IEEE.
  6. Chu, T.L., Martinez-Guridi, G., Yue, M., Lehner, J. and Samanta, P. (2008), Traditional Probabilistic Risk Assessment Methods for Digital Systems, Washington DC: United States Nuclear Regulatory commision.
  7. Chu, T.L., Yeu, M., Martinez-Guridi, G., Mernick, K., Lehner, J. and Kuritzky, A. (2009), Modeling a Digital Feedwater Control System Using Traditional Probabilistic Risk Assessment Methods, NY: United States Nuclear Regulatory Commision.
  8. Dong, H., Jin, X., Lou, Y. and Wang, C. (2014), "Lithium-ion battery state of health monitoring and remaining useful life prediction based on support vector regression-particle filter", J. Power Sources, 271, 114-123. https://doi.org/10.1016/j.jpowsour.2014.07.176
  9. Doucet, A., de Freitas, N. and Gordon, N. (2001), An introduction to Sequential Monte Carlo methods, Springer-Verlag.
  10. Feng, Z., Wen-fang, X. and Liu, X. (2011), "Overview of nonlinear bayesian filtering algorithm", Procedia Eng., 15, 489-495. https://doi.org/10.1016/j.proeng.2011.08.093
  11. Ginsberg, D., Fritzen, C. and Loffeld, O. (2018), "Sparsityconstrained Extended kalman filter concept for damage localization and identification in mechanical structures", Smart Struct. Syst., 21(6), 741-749. https://doi.org/10.12989/SSS.2018.21.6.741
  12. IEEE Standards Association (2006), IEEE Std 650-2006, IEEE Standard for Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Power Generating Stations.
  13. Illuminating Engineering Society (2011), IES TM-21-11, Projecting Long Term Lumen Maintenance of LED Light Sources.
  14. International Electrotechnical Commission (2006), Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA). IEC 60812.
  15. Kulkarni, C., Biswas, G. and Koutsoukos, X. (2009), "A prognosis case study for electrolytic capacitor degrdation in DC-DC converters", Proceedings of the Annual Conference of the Prognostics and Health Management Society.
  16. Lall, P., Lowe, R. and Geobel, K. (2011), "Extended Kalman Filter models and resistance spectroscopy for prognostication and health monitoring of leadfree electronics under vibration", Prognostics and Health Management, 1-12, Montreal: IEEE.
  17. Lee, S.J., Jung, W. and Yang, J. (2016), PSA Model with Consideratioin of The Effect of Fault-tolerant Techniques in Digital I&C Systems, Annls of Nuclear Energy, 375-384.
  18. Meeker, W.Q., Escobar, L.A. and Lu, J.C. (1999), Accelerated Degradation Tests: Modeling and Analysis, Statistics Preprints, 2.
  19. Mohammadian, H.S., Aiit-Kadi, D. and Routhier, F. (2010), "Quantitative accelerated degradation testing: Practical approaches", Reliab. Eng. Syst. Safe., 95(2), 149-159. https://doi.org/10.1016/j.ress.2009.09.009
  20. Mooney, P.M., Theis, T.N. and Calleja, E. (1991), "Effect of local alloy disorder on the emission kinetics of deep donors (DX centers) in AlxGa1-xAs", J. Electron. Mater., 20(1), 23-33. https://doi.org/10.1007/BF02651962
  21. National Instruments (2015), Digital I/O for test, control, and design. Retrieved from http://www.ni.com
  22. Orchard, M.E. and Vachtsevanos, G.J. (2009), "A particle-filtering approcah for on-line fault diagnosis and failure prognosis", Transactions of the Institute of Measurement and Control, 221-246.
  23. Shi, Z., Lu, Y., Chen, Y. and Feng, J. (2014), "The real-time fault diagnosis of optocoupler in switching mode power supply", Proceedings of the International Conference on Reliability, Maintainability and Safety, Guangzhou.
  24. Singleton, R.K., Strangas, E.G. and Aviyente, S. (2015), "Extended kalman filtering for remaining-useful-life estimation of bearings", T. Ind. Electron., 62(3), 1781-1790. https://doi.org/10.1109/TIE.2014.2336616
  25. Slama, J., Helali, S., Lahyani, A., Louati, K., Venet, P. and Rojat, G. (2008), "Study and modelling of optocouplers ageing", J. Autom. Syst. Eng., 2(3).
  26. Terejanu, G.A. (2007), Extended Kalman Filter Tutorial, Buffalo, NY, USA.
  27. Yang, G. (2007), Degradation testing and analysis, In G. Yang, Life Cycle Reliability Engineering, John Wiley & Sons, Inc.
  28. Yoshida, I. and Akiyama, M. (2013), "Particle filter for model updating and reliability estimation of existing structures", Smart Struct. Syst., 11(1), 103-122. https://doi.org/10.12989/sss.2013.11.1.103