Steel and Composite Structures

  • 제28권3호
  • /
  • Pages.309-318
  • /
  • 2018
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

The effects of beam-column connections on behavior of buckling-restrained braced frames

  • 투고 : 2017.11.04
  • 심사 : 2018.05.24
  • 발행 : 2018.08.10
⟨ 이전 논문 다음 논문 ⟩

초록

Buckling Restrained Braced (BRB) frames have been widely used as an efficient seismic load resisting system in recent years mostly due to their symmetric and stable hysteretic behavior and significant energy dissipation capacity. In this study, to provide a better understanding of the behavior of BRB frames with various beam-column connections, a numerical study using non-linear finite element (FE) analysis is conducted. All models are implemented in the Abaqus software package following an explicit formulation. Initially, the results of the FE model are verified with experimental data. Then, diverse beam-column connections are modeled for the sake of comparison from the shear capacity, energy dissipation and frame hysteresis behavior points of view until appropriate performance is assessed. The considered connections are divided into three different categories: (1) simple beam-column connections including connection by web angle and connection by seat angle; (2) semi-rigid connection including connection by web and seat angles; and (3) rigid beam-column connections by upper-lower beam plates and beam connections with web and flange splices. Results of the non-linear FE analyses show that these types of beam-column connections have little effect on the maximum story drift and shear capacity of BRB frames. However, the connection type has a significant effect on the amount of energy dissipation and hysteresis behavior of BRB frames. Also, changes in length and thickness of the angles in simple and semi-rigid connections and changes in length and thickness of plates in rigid connections have slight effects (less than 4%) on the overall frame behavior.

키워드

참고문헌

  1. Abaqus (2012), Abaqus 6.12, Analysis and Theory Manual, Simulia, Dassault Systems.
  2. Aiken, I., Mahin, S.A. and Uriz, P. (2002), "Large-scale testing of buckling-restrained braced frames", Proceedings of Japan Passive Control Symposium, Japan.
  3. AISC (2005), Seismic Provisions for Structural Steel Buildings, American Institute of Steel Construction, Chicago, IL, USA.
  4. ANSI/AISC 360-10 (2010), Specification for structural steel buildings, AISC Committee on Specifications.
  5. ASCE (2005), Minimum Design Loads for Buildings and other Structures; American Society of Civil Engineers, ASCE/SEI 7-05.
  6. Assaleh, K., AlHamaydeh, M. and Choudhary, I. (2015), "Modeling nonlinear behavior of Buckling-Restrained Braces via different artificial intelligence methods", Appl. Soft Comput., 37, 923-938. https://doi.org/10.1016/j.asoc.2015.09.014
  7. Christopulos, A.S. (2005), "Improved seismic performance of buckling restrained braced frames", Ph.D. Thesis; University of Washington, Seattle, WA, USA.
  8. Chou, C.-C. and Chen, S.-Y. (2010), "Subassemblage tests and finite element analyses of sandwiched buckling-restrained braces", Eng. Struct., 32(8), 2108-2121. https://doi.org/10.1016/j.engstruct.2010.03.014
  9. Chou, C.-C. and Chung, P.-T. (2014), "Development of cross-anchored dual-core self-centering braces for seismic resistance", Constr. Steel Res., 101, 19-32. https://doi.org/10.1016/j.jcsr.2014.04.035
  10. Chou, C-C., Chen, Y.-C., Pham, D.-H. and Truong, V.-M. (2014), "Steel braced frames with dual-core SCBs and sandwiched BRBs: Mechanics, modeling and seismic demands", Eng. Struct., 72, 26-40. https://doi.org/10.1016/j.engstruct.2014.04.022
  11. Clark, P., Aiken, I., Kasai, K., Ko, E. and Kimura, I. (1999), "Design procedures for buildings incorporating hysteretic damping devices", Proceedings of the 68th Annual Convention, Structural Engineers Association of California, Santa Barbara, CA, USA, September-October.
  12. Eurocode 3-Part 1-8 (2005), Design of steel structures; Part 1-8: Design of Joints, European Committee for Standardization.
  13. Fahnestock, L.A., Ricles, J.M. and Sause, R. (2007), "Experimental evaluation of a large-scale buckling-restrained braced frame", Struct. Eng., 133(9), 1205-1214. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:9(1205)
  14. Fanaie, N. and Afsar Dizaj, E. (2014), "Response modification factor of the frames braced with reduced yielding segment BRB", Struct. Eng. Mech., Int. J., 50(1), 1-17. https://doi.org/10.12989/sem.2014.50.1.001
  15. Faridmehr, I., Tahir, M.M. and Lahmer, T. (2016), "Classification system for semi-rigid beam-to-column connections", Latin Am. J. Solids Struct., 13(11), 2152-2175. https://doi.org/10.1590/1679-78252595
  16. Flogeras, A.K. and Papagiannopoulos, G.A. (2017), "On the seismic response of steel buckling-restrained braced structures including soil-structure interaction", Earthq. Struct., 12(4), 469-478. https://doi.org/10.12989/eas.2017.12.4.469
  17. Ghowsi, A.F. and Sahoo, D.R. (2015), "Fragility assessment of buckling-restrained braced frames under near-field earthquakes", Steel Compos. Struct., Int. J., 19(1), 173-190. https://doi.org/10.12989/scs.2015.19.1.173
  18. Hadianfard, M.A. and Khakzad, A.R. (2016), "Inelastic buckling and post-buckling behavior of gusset plate connections", Steel Compos. Struct., Int. J., 22(2), 411-427. https://doi.org/10.12989/scs.2016.22.2.411
  19. Hadianfard, M.A. and Rahnema, H. (2010), "Effects of RHS face deformation on the rigidity of beam-column connection", Steel Compos. Struct., Int. J., 10(6), 491-502.
  20. Hadianfard, M.A., Khakzad, A.R. and Vaghefi, M. (2015), "Analysis of the effect of stiffener on the buckling capacity and non-elastic behavior of bracing gusset plates", Scientia Iranica, 22(4), 1449-1456.
  21. Hadianfard, M.A., Hashemi, A. and Gholami, M. (2017), "Study on the effects of various mid-connections of x-brace on frame behavior", Earthq. Struct., Int. J., 12(4), 449-455. https://doi.org/10.12989/eas.2017.12.4.449
  22. Hoveidae, N. and Rafezy, B. (2012), "Overall buckling behavior of all-steel buckling restrained braces", Constr. Steel Res., 79, 151-158. https://doi.org/10.1016/j.jcsr.2012.07.022
  23. Kim, S.H. and Choi, S.M. (2015), "Structural behavior of inverted V-braced frames reinforced with non-welded buckling restrained braces", Steel Compos. Struct., Int. J., 19(6), 1581-1598. https://doi.org/10.12989/scs.2015.19.6.1581
  24. Lin, P.-C., Tsai, K.-C., Wang, K.-J., Yu, Y.-J., Wei, C.-Y., Wu, A.-C., Tsai, C.-Y., Lin, C.-H., Chen, J.-C., Schellenberg, A.H., Mahin, S.A. and Roeder, C.W. (2012), "Seismic design and hybrid tests of a full-scale three-story buckling-restrained braced frame using welded end connections and thin profile", Earthq. Eng. Struct. Dyn., 41(5), 1001-1020. https://doi.org/10.1002/eqe.1171
  25. Palmer, K.D., Christopulos, A.S., Lehman, D.E. and Roeder, C.W. (2014), "Experimental evaluation of cyclically loaded, large-scale, planar and 3-d buckling restrained braced frames", Constr. Steel Res., 101, 415-425. https://doi.org/10.1016/j.jcsr.2014.06.008
  26. Prinz, G.S. (2007), "Effect of beam splicing on seismic response of buckling restrained braced frames", M.Sc. Thesis; Brigham Young University, Provo, UT, USA.
  27. Razavi-Tabatabaei, S.A., Mirghadri, S.R. and Hosseini, A. (2014), "Experimental and numerical developing of reduced length buckling-restrained brace", Eng. Struct., 77, 143-160. https://doi.org/10.1016/j.engstruct.2014.07.034
  28. Talebi, E., Tahir, M., Zahmatkesh, F. and Kueh, A. (2015), "A numerical analysis on the performance of buckling restrained braces at fire-study of the gap filler effect", Steel Compos. Struct., Int. J., 19(3), 661-678. https://doi.org/10.12989/scs.2015.19.3.661
  29. Tremblay, R., Poncet, L., Bolduc, P., Neville, R. and Devall, R. (2004), "Testing and design of buckling restrained braces for Canadian application", Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, BC, Canada, August.
  30. Watanabe, A., Hitomi, Y., Saeki, E., Wada, A. and Fujimoto, M. (1998), "Properties of brace encased in buckling restraining concrete and steel tube", Proceedings of the 9th World Conference on Earthquake Engineering, Tokyo-Kyoto, Japan, August, Vol. IV, pp. 719-724.
  31. Wigle, V.R. and Fahnestock, L.A. (2010), "Buckling-restrained braced frame connection performance", Constr. Steel Res., 66(1), 65-74. https://doi.org/10.1016/j.jcsr.2009.07.014

피인용 문헌

  1. Three-field mixed beam-column finite element for geometric and material nonlinear analysis vol.79, pp.2, 2021, https://doi.org/10.12989/sem.2021.79.2.211