The Proceeding of the Korean Institute of Electromagnetic Engineering and Science (한국전자파학회지:전자파기술)

The Korean Institute of Electromagnetic Engineering and Science (한국전자파학회)
권호 표지

3D 프린팅 기술기반의 RF/안테나 기술동향

  • Published : 2018.07.31
Download PDF
⟨ Previous Next ⟩

Abstract

Keywords

References

  1. 곽기호, 박성우, "글로벌 3D 프린트산업 기술동향 분석", 한국기계연구원, 기계기술정책 71, 2013년.
  2. J. C. S. Chieh, B. Dick, S. Loui, and J. D. Rockway, "Development of a Ku-band corrugated conical horn using 3D print technology", IEEE Antennas and Wireless Propagation Letter, vol. 13, pp. 201-204, Feb. 2014. https://doi.org/10.1109/LAWP.2014.2301169
  3. M. Liang, W. R. Ng, K. Chang, K. Gbele, M. E. Gehm, and H. Xin, "A 3D Luneberg lengs antenna fabricated by polymer jetting rapid prototyping", IEEE Trans. Antennas and Propagation, vol. 62, no. 4, pp. 1799-1807, Apr. 2014. https://doi.org/10.1109/TAP.2013.2297165
  4. B. Sanz-Izquierdo and E. A. Parker, "3D printing of elements in frequency selective arrays", IEEE Trans. Antennas and Propagation, vol. 62, no. 12, pp. 6060-6066, Dec. 2014. https://doi.org/10.1109/TAP.2014.2359470
  5. P. Nayeri, L. Min, R. A. Sabory-Garcia, M. Tuo, F. Yang, M. Cehm, H. Xin, and A. Z. Elshebeni, "3D printed dielectric reflectarrays: Low-cost high-gain antennas at sub-millimeter waves", IEEE Trans. Antennas and Propagation, vol. 62, no. 4, pp. 2000-2008, Apr. 2014. https://doi.org/10.1109/TAP.2014.2303195
  6. M. D'Auria, W. J. Otter, J. Hazell, B. T. W. Gillatt, C. Long-Collins, N. M. Ridler, and S. Lucyszyn, "3D printed metal-pipe rectangular waveguides", IEEE Trans. Comp. Packag. Manuf. Technol., vol. 5, no. 9, pp. 1339-1348, Sep. 2015. https://doi.org/10.1109/TCPMT.2015.2462130
  7. Paul I. Deffenbaugh, Thomas M. Weller, and Kenneth H. Church, "Fabrication and microwave characterization of 3-D printed transmission lines", IEEE Microwave abd Wireless Components Letters, vol. 25, no. 12, pp. 823-825, Dec. 2015. https://doi.org/10.1109/LMWC.2015.2495184
  8. G. Venanzoni, M. Dionigi, C. Tomassoni, D. Eleonori, and R. Sorrentino, "3D printing of X band waveguide resonators and filters", 32nd URSI GASS, Motreal, pp. 19-26, Aug. 2017.
  9. C. Guo, X. Shang, M. J. Lancaster, and J. Xu, "A 3D printed lightweight X-band waveguide filter based on spherical resonators", IEEE Microwave and Wireless Components Letters, vol. 25, no. 7, pp. 442-444, Jul. 2015. https://doi.org/10.1109/LMWC.2015.2427653
  10. G. P. L. Sage, "3D printed waveguide slot array antennas", IEEE Access, vol. 4, pp. 1258-1265, Apr. 2016. https://doi.org/10.1109/ACCESS.2016.2544278
  11. H. Saeidi-Manesh, S. Saeedi, M. Mirmozafari, G. Zhang, and H. H. Sigmarsson, "Design and fabrication of orthogonal mode transducer using 3D printing technology", IEEE Antennas and Wireless Propagation Letter, May 2018.
  12. E. Decrossas, T. Reck, C. Lee, C. Jung-Kubiak, I. Mehdi, and G. Chattopadhyay, "Evaluation of 3D printing technology for corrugated horn antenna manufacturing", IEEE International Symposium on Electromagnetic Compatibility, Sep. 2016.
  13. H. Yao, S. Sharma, R. Henderson, S. Ashrafi, and D. MacFarlane, "Ka band 3D printed horn antennas", 2017 Texas Symposium on Wireless and Microwave Circuits and Systems, Oct. 2017.
  14. S. T. Kim, J. W. Lee, and T.-K. Lee, "Performance investigation of feed horn using FDM 3D printing technology", 2018 International Symposium on Antennas and Propagation, Oct. 2018(To be published).
  15. S. S. Yoon, J. W. Lee, T.-K. Lee, and J. H. Roh, "Insensitivity characteristics in the dual polarization of deployable CFRP reflector antennas", IEEE Trans. on Antennas and Propagation, vol. 66, no. 1, pp. 88-95, Jan. 2018. https://doi.org/10.1109/TAP.2017.2772315