Geomechanics and Engineering

  • 제15권5호
  • /
  • Pages.1061-1070
  • /
  • 2018
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Preliminary numerical analysis of controllable prestressed wale system for deep excavation

  • Lee, Chang Il (Department of Civil Engineering, Seoul National University of Science and Technology) ;
  • Kim, Eun Kyum (Department of Civil Engineering, Seoul National University of Science and Technology) ;
  • Park, Jong Sik (Civil Business Team, TAEYOUNG E&C) ;
  • Lee, Yong-Joo (Department of Civil Engineering, Seoul National University of Science and Technology)
  • 투고 : 2017.11.13
  • 심사 : 2018.01.30
  • 발행 : 2018.08.10
⟨ 이전 논문 다음 논문 ⟩

초록

The main purpose of retaining wall methods for deep excavation is to keep the construction site safe from the earth pressure acting on the backfill during the construction period. Currently used retaining wall methods include the common strut method, anchor method, slurry wall method, and raker method. However, these methods have drawbacks such as reduced workspace and intrusion into private property, and thus, efforts are being made to improve them. The most advanced retaining wall method is the prestressed wale system, so far, in which a load corresponding to the earth pressure is applied to the wale by using the tension of a prestressed (PS) strand wire. This system affords advantages such as providing sufficient workspace by lengthening the strut interval and minimizing intrusion into private properties adjacent to the site. However, this system cannot control the tension of the PS strand wire, and thus, it cannot actively cope with changes in the earth pressure due to excavation. This study conducts a preliminary numerical analysis of the field applicability of the controllable prestressed wale system (CPWS) which can adjust the tension of the PS strand wire. For the analysis, back analysis was conducted through two-dimensional (2D) and three-dimensional (3D) numerical analyses based on the field measurement data of the typical strut method, and then, the field applicability of CPWS was examined by comparing the lateral deflection of the wall and adjacent ground surface settlements under the same conditions. In addition, the displacement and settlement of the wall were predicted through numerical analysis while the prestress force of CPWS was varied, and the structural stability was analysed through load tests on model specimens.

키워드

참고문헌

  1. Chowdhury, S.S., Deb, K. and Sengupta, A. (2013), "Estimation of design parameters for braced excavation: Numerical study", J. Geomech., 13(3), 234-247. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000207
  2. Civil Engineering and Textile Society (2010), Reinforced Soil Method, CIR Publishing, 98.
  3. Dang, H.P., Lin, H.D., Kung, J.H.S. and Wang, C.C. (2012), "Deformation behavior analyses of braced excavation considering adjacent structure by user-defined soil model", J. GeoEng., 7(1), 13-20.
  4. Dong, Y.P., Burd, H.J. and Houlsby, G.T. (2016), "Finite-element analysis of a deep excavation case history", Geotechnique, 66(1), 1-15. https://doi.org/10.1680/jgeot.14.P.234
  5. Dong Y. (2014), "Advanced finite element analysis of deep excavation case histories", Ph.D. Dissertation, University of Oxford, Oxford, U.K.
  6. Ghasemi, S.H. and Nowak, A.S. (2017a), "Reliability index for non-normal distributions of limit state functions", Struct. Eng. Mech., 62(3), 365-372. https://doi.org/10.12989/sem.2017.62.3.365
  7. Ghasemi, S.H. and Nowak, A.S. (2017b), "Target reliability for bridges with consideration of ultimate limit state", Eng. Struct., 152, 226-237 https://doi.org/10.1016/j.engstruct.2017.09.012
  8. Huang, X., Huang, H. and Zhang, D. (2012), "Centrifuge modelling of deep excavation over existing tunnel", Proc. Inst. Civ. Eng. Geotech. Eng., 167(1), 3-18. https://doi.org/10.1680/geng.11.00045
  9. Kim, N.K., Park, J.S., Han, M.Y., Kim, M.Y. and Kim, S.B. (2004), "Development of innovative prestressed support earth retention system", J. Kor. Geotech. Soc., 20(2), 107-113.
  10. Kim, M.Y., Lee, J.S., Han, M.Y., Kim, S.B. and Kim, N.K. (2005a), "A multi-noded cable element considering sliding effects", J. Kor. Soc. Steel Construct., 17(4), 449-457
  11. Kim, N.K., Park, J.S., Jang, H.J., Han, M.Y., Kim, M.Y. and Kim, S.B. (2005b), "Performance of innovative prestressed support earth retention system in urban excavation", J. Kor. Geotech. Soc., 21(2), 27-36.
  12. Kim, N.K., Park, J.S., Oh, H.J., Han, M.Y., Kim, M.Y. and Kim, S.B. (2007), "Performance of IPS earth retention system in soft clay", J. Kor. Geotech. Soc., 23(3), 5-13.
  13. Korea Geosynthetics Society (2010), Practice of Reinforced Soil Method, CIR Publishing, 98.
  14. Kung, G.T.C. (2010), Finite Element Analysis of Wall Deflection And Ground Movements Caused by Braced Excavations, in Finite Element Analysis, InTech.
  15. Lee, F.H., Yong, K.Y., Quan, K.C.N. and Chee, K.T. (1998), "Effect of corners in strutted excavations: Field monitoring and case histories", J. Geotech. Geoenviron. Eng., 124(4), 339-349. https://doi.org/10.1061/(ASCE)1090-0241(1998)124:4(339)
  16. Leung, R.K., Li, E.S. and Leung, C.L. (2009), "A case study: Design and construction of foundation and braced excavation at a reclaimed site at waterfront", Proceedings of the State-of-theart Technology and Experience on Geotechnical Engineering in Malaysia and Hong Kong, Hong Kong, August.
  17. Li, D., Li, Z. and Tang, D. (2015), "Three-dimensional effects on deformation of deep excavations", Proc. Inst. Civ. Eng. Geotech. Eng., 168(6), 551-562. https://doi.org/10.1680/jgeen.15.00042
  18. Long, M. (2001), "Data for retaining wall and ground movements due to deep excavations", J. Geotech. Geoenviron. Eng., 127(3), 203-224. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:3(203)
  19. Nowak, A.S. and Collins, K.R. (2013), Reliability of Structure, CRC Press, New York, U.S.A.
  20. Onishi, K. and Sugawara, T. (1999), "Behavior of an earth retaining wall during deep excavation in Shanghai soft ground", Soils Found., 39(3), 89-97. https://doi.org/10.3208/sandf.39.3_89
  21. Osman, A. and Bolton, M. (2007), Back Analysis of Three Case Histories of Braced Excavations in Boston Blue Clay Using MSD Method, in Soft Soil Engineering, Taylor & Francis, 755-764.
  22. Osman, A.S. and Bolton, M.D. (2006), "Ground movement predictions for braced excavations undrained clay", J. Geotech. Geoenviron. Eng., 132(4), 465-477. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:4(465)
  23. Ou, C.Y., Liao, J.T. and Cheng, W.L. (2000), "Building response and ground movements induced by a deep excavation", Geotechnique, 50(3), 209-220. https://doi.org/10.1680/geot.2000.50.3.209
  24. Park, J.S., Joo, Y.S. and Kim, N.K. (2009), "New earth retention system with prestressed wale in urban excavation", J. Geotech. Geoenviron. Eng., 135(11), 1596-1604. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000148
  25. Park, J.S., Kim, N.K., Han, M.Y. and Kim, J.W. (2004), "IPS earth retention system", Proceedings of the Korean Geotechnical Society Spring Conference, Seoul, Korea, March.
  26. Pickles, A.R., Lee, S.W. and Norcliffe, B.A.W. (2003), "Groundwater and ground movement around deep excavation", Proc. Inst. Civ. Eng. Geotech. Eng., 156(3), 147-158. https://doi.org/10.1680/geng.2003.156.3.147
  27. Usluogullari, O.F., Temugan, A., Duman, E.S. and Yegin, Y. (2015), "Three dimensional finite element analysis of a deep excavation: Case study in Istanbul Metro", Proceedings of the 16th European Conference on Soil Mechanics and Geotechnical Engineering, Edinburgh, U.K.
  28. Usmani, A., Ramana, G.V. and Sharma, K.G. (2010), "Analysis of braced excavation using hardening soil model", Proceedings of the Indian Geotechnical Conference, Mumbai, India, December.
  29. Xu, C., Xu, Y., Sun, H. and Chen, Q. (2013), "Characteristic of braced excavation under asymmetrical loads", Math. Prob. Eng., 1-13.

피인용 문헌

  1. Allowable wall deflection of braced excavation adjacent to pile-supported buildings vol.26, pp.2, 2018, https://doi.org/10.12989/gae.2021.26.2.161