Geomechanics and Engineering

  • 제15권5호
  • /
  • Pages.1047-1059
  • /
  • 2018
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Crack initiation and fragmentation processes in pre-cracked rock-like materials

  • Lee, Jooeun (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology) ;
  • Hong, Jung-Wuk (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology)
  • 투고 : 2018.01.21
  • 심사 : 2018.01.29
  • 발행 : 2018.08.10
⟨ 이전 논문 다음 논문 ⟩

초록

This paper focuses on the cracking and fragmentation process in rock materials containing a pair of non-parallel flaws, which are through the specimen thickness, under vertical compression. Several numerical experiments are conducted with varying flaw arrangements that affect the initiation and tensile wing cracks, shear crack growth, and crack coalescing behaviors. To obtain realistic numerical results, a parallelized peridynamics formulation coupled with a finite element method, which is able to capture arbitrarily occurring cracks, is employed. From previous studies, crack initiation and propagation of tensile wing cracks, horsetail cracks, and anti-wing cracks are well understood along with the coalescence between two parallel flaws. In this study, the coalescence behaviors, their fragmentation sequences, and the role of an x-shaped shear band in rock material containing two non-parallel flaws are discussed in detail on the basis of simulation results strongly correlated with previous experimental results. Firstly, crack initiation and propagation of tensile wing cracks and shear cracks between non-parallel flaws are investigated in time-history and then sequential coalescing behavior is analyzed. Secondly, under the effect of varying inclination angles of two non-parallel flaws and overlapping ratios between a pair of non-parallel flaws, the cracking patterns including crack coalescence, fragmentation, and x-shaped shear band are investigated. These numerical results, which are in good agreement with reported physical test results, are expected to provide insightful information of the fracture mechanism of rock with non-parallel flaws.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea (NRF)

참고문헌

  1. Bobet, A. (2000), "The initiation of secondary cracks in compression", Eng. Fract. Mech., 66(2), 187-219. https://doi.org/10.1016/S0013-7944(00)00009-6
  2. Bobet, A. and Einstein, H.H. (1998), "Fracture coalescence in rock-type materials under uniaxial and biaxial compression", J. Rock Mech. Min. Sci., 35(7), 863-888. https://doi.org/10.1016/S0148-9062(98)00005-9
  3. Cao, P., Liu, T., Pu, C. and Lin, H. (2015), "Crack propagation and coalescence of brittle rock-like specimens with pre-existing cracks in compression", Eng. Geol., 187, 113-121. https://doi.org/10.1016/j.enggeo.2014.12.010
  4. Chen, G., Kemeny J.M. and Harpalani, S. (1995), "Fracture propagation and coalescence in marble plates with pre-cut notches under compression", Proceedings of the Symposium on Fractured and Jointed Rock Mass, Lake Tahoe, California, U.S.A.
  5. Cheng, Y., Wong, L.N.Y. and Zou, C. (2015), "Experimental study on the formation of faults from en-echelon fractures in Carrara marble", Eng. Geol., 195, 312-326. https://doi.org/10.1016/j.enggeo.2015.06.004
  6. Ercolessi, F. (1997), A Molecular Dynamics Primer, in Spring College in Computational Physics, ICTP, Trieste, Italy, 24-25.
  7. Feng, X.T., Ding, W. and Zhang, D. (2009), "Multi-crack interaction in limestone subject to stress and flaw of chemical solutions", J. Rock Mech. Min. Sci., 46(1), 159-171. https://doi.org/10.1016/j.ijrmms.2008.08.001
  8. Ha, Y.D. and Bobaru, F. (2011), "Characteristics of dynamic brittle fracture captured with peridynamics", Eng. Fract. Mech., 78(6), 1156-1168. https://doi.org/10.1016/j.engfracmech.2010.11.020
  9. Ha, Y.D., Lee, J. and Hong, J.W. (2015), "Fracturing patterns of rock-like materials in compression captured with peridynamics", Eng. Fract. Mech., 144, 176-193. https://doi.org/10.1016/j.engfracmech.2015.06.064
  10. Haeri, H., Sarfarazi, V. and Zhu, Z. (2017), "Effect of normal load on the crack propagation from pre-existing joints using Particle Flow Code (PFC)", Geomech. Eng., 19(1), 99-110.
  11. Huang, J.F., Chen, G.L., Zhao, Y.H. and Wang, R. (1990), "An experimental study of the strain field development prior to failure of a marble plate under compression", Tectonophys., 175(1-3), 283-290.
  12. Ko, T.Y., Einstein, H.H. and Kemeny, J. (2006), "Crack coalescence in brittle material under cyclic loading", Proceedings of the Golden Rocks 2006, The 41st US Symposium on Rock Mechanics (USRMS), Golden, Colorado, U.S.A., June.
  13. Lajtai, E.Z. (1974), "Brittle fracture in compression", J. Fract., 10(4), 525-536. https://doi.org/10.1007/BF00155255
  14. Lee, H. and Jeon, S. (2011), "An experimental and numerical study of fracture coalescence in pre-cracked specimens under uniaxial compression", J. Solid. Struct., 48(6), 979-999. https://doi.org/10.1016/j.ijsolstr.2010.12.001
  15. Lee, J. and Hong, J.W. (2016b), "Dynamic crack branching and curving in brittle polymers", J. Solid. Struct., 100, 332-340.
  16. Lee, J., Ha, Y.D. and Hong, J.W. (2017b), "Crack coalescence morphology in rock-like material under compression", J. Fract., 203(1-2), 211-236. https://doi.org/10.1007/s10704-016-0138-2
  17. Lee, J., Hong, J.W. and Jung, J.W. (2017c), "The mechanism of fracture coalescence in pre-cracked rock-type material with three flaws", Eng. Geol., 223, 31-47. https://doi.org/10.1016/j.enggeo.2017.04.014
  18. Lee, J., Liu, W. and Hong, J.W. (2016a), "Impact fracture enhanced by contact of peridynamic and finite element formulations", J. Impact Eng., 87, 108-119. https://doi.org/10.1016/j.ijimpeng.2015.06.012
  19. Lee, J., Oh, S.E. and Hong, J.W. (2017a), "Parallel programming of a peridynamics code coupled with finite element method", J. Fract., 203(1-2), 99-114. https://doi.org/10.1007/s10704-016-0121-y
  20. Li, H. and Wong, L.N.Y. (2012), "Influence of flaw inclination angle and loading condition on crack initiation and propagation", J. Solid. Struct., 49(18), 2482-2499. https://doi.org/10.1016/j.ijsolstr.2012.05.012
  21. Li, H.Q. and Wong, L.N.Y. (2014), "Numerical study on coalescence of pre-existing flaw pairs in rock-like material", Rock Mech. Rock Eng., 47(6), 2087-2105. https://doi.org/10.1007/s00603-013-0504-6
  22. Liu, W. and Hong, J.W. (2012a), "Discretized peridynamics for linear elastic solids", Comput. Mech., 50(5), 579-590. https://doi.org/10.1007/s00466-012-0690-1
  23. Liu, W. and Hong, J.W. (2012b), "Discretized peridynamics for brittle and ductile solids", J. Numer. Mech. Eng., 89(8), 1028-1046. https://doi.org/10.1002/nme.3278
  24. Liu, W. and Hong, J.W. (2012c), "A coupling approach of discretized peridynamics with finite element method", Comput. Meth. Appl. Mech., 245, 163-175.
  25. Manouchehrian, A. and Marji, M.F. (2012), "Numerical analysis of confinement effect on crack propagation mechanism from a flaw in a pre-cracked rock under compression", Acta Mech. Sinica, 28(5), 1389-1397. https://doi.org/10.1007/s10409-012-0145-0
  26. Manouchehrian, A., Sharifzadeh, M., Marji, M.F. and Gholamnejad, J. (2014), "A bonded particle model for analysis of the flaw orientation effect on crack propagation mechanism in brittle materials under compression", Arch. Civ. Mech. Eng., 14(1), 40-52. https://doi.org/10.1016/j.acme.2013.05.008
  27. Mughieda, O. and Alzo'ubi, A.K. (2004), "Fracture mechanics of offset rock joints: a laboratory investigation", Geotech. Geol. Eng., 22(4), 545-562. https://doi.org/10.1023/B:GEGE.0000047045.89857.06
  28. Park, C.H. and Bobet, A. (2009), "Crack coalescence in specimens with open and closed flaws: A comparison", J. Rock Mech. Min. Sci., 46(5), 819-829. https://doi.org/10.1016/j.ijrmms.2009.02.006
  29. Park, C.H. and Bobet, A. (2010), "Crack initiation, propagation and coalescence from frictional flaws in uniaxial compression", Eng. Fract. Mech., 77(14), 2727-2748. https://doi.org/10.1016/j.engfracmech.2010.06.027
  30. Sagong, M. and Bobet, A. (2002), "Coalescence of multiple flaws in a rock-model material in uniaxial compression", J. Rock Mech. Min. Sci., 39(2), 229-241. https://doi.org/10.1016/S1365-1609(02)00027-8
  31. Sarfarazi, V. and Haeri, H. (2016), "A review of experimental and numerical investigations about crack propagation", Geomech. Eng., 18(2), 235-266.
  32. Shen, B., Stephansson, O., Einstein, H.H. and Ghahreman, B. (1995), "Coalescence of fractures under shear stress experiments", J. Geophys. Res., 100(6), 5975-5990. https://doi.org/10.1029/95JB00040
  33. Silling, S.A. (2000), "Reformulation of elasticity theory for discontinuities and long-range forces", J. Mech. Phys. Solids, 48(1), 175-209. https://doi.org/10.1016/S0022-5096(99)00029-0
  34. Silling, S.A. and Askari, E. (2005), "A meshfree method based on the peridynamic model of solid mechanics", Comput. Struct., 83(17-18), 1526-1535. https://doi.org/10.1016/j.compstruc.2004.11.026
  35. Tang, C.A. and Kou, S.Q. (1998), "Crack propagation and coalescence in brittle materials under compression", Eng. Fract. Mech., 61(3-4), 311-324. https://doi.org/10.1016/S0013-7944(98)00067-8
  36. Tang, C.A., Lin, P., Wong, R.H.C. and Chau, K.T. (2001), "Analysis of crack coalescence in rock-like materials containing three flaws-Part II: Numerical approach", J. Rock Mech. Min. Sci., 38(7), 925-939. https://doi.org/10.1016/S1365-1609(01)00065-X
  37. Tian, W.L. and Yang, S.Q. (2017), "Experimental and numerical study on the fracture coalescence behavior of rock-like materials containing two non-coplanar filld fissures under uniaxial compression", Geomech. Eng., 12(3), 541-560. https://doi.org/10.12989/gae.2017.12.3.541
  38. Wong, L.N.Y. (2008), "Crack coalescence in molded gypsum and Carrara marble", Ph.D. Dissertation, Massachusetts Institute of Technology, Cambridge, Massachusetts, U.S.A.
  39. Wong, L.N.Y. and Einstein, H.H. (2009a), "Systematic evaluation of cracking behavior in specimens containing single flaws under uniaxial compression", J. Rock Mech. Min. Sci., 46(2), 239-249. https://doi.org/10.1016/j.ijrmms.2008.03.006
  40. Wong, L.N.Y. and Einstein, H.H. (2009b), "Crack coalescence in molded gypsum and Carrara marble: Part 1. Macroscopic observations and interpretation", Rock Mech. Rock Eng., 42(3), 475-511. https://doi.org/10.1007/s00603-008-0002-4
  41. Wong, R.H.C., Chau, K.T., Tang, C.A. and Lin, P. (2001), "Analysis of crack coalescence in rock-like materials containing three flaws-Part I: Experimental approach", J. Rock Mech. Min. Sci., 38(7), 909-924. https://doi.org/10.1016/S1365-1609(01)00064-8
  42. Wong, R.H.C., Guo, Y.S.H., Li, L.Y., Chau, K.T., Zhu, W.S. and Li, S.C. (2006), "Anti-wing crack growth from surface flaw in real rock under uniaxial compression", Proceedings of the 16th European Conference of Fracture (EFC16), Alexandroupolis, Greece, July.
  43. Wong, R.H.C., Tang, C.A., Chau, K.T. and Lin, P. (2002), "Splitting failure in brittle rocks containing pre-existing flaws under uniaxial compression", Eng. Fract. Mech., 69(17), 1853-1871. https://doi.org/10.1016/S0013-7944(02)00065-6
  44. Wu, Z. and Wong, L.N.Y. (2014), "Investigating the effects of micro-defects on the dynamic properties of rock using numerical manifold method", Constr. Build. Mater., 72, 72-82. https://doi.org/10.1016/j.conbuildmat.2014.08.082
  45. Yang, S.Q., Yang, D.S., Jing, H.W., Li, Y.H. and Wang, S.Y. (2012), "An experimental study of the fracture coalescence behaviour of brittle sandstone specimens containing three fissures", Rock Mech. Rock Eng., 45(4), 563-582. https://doi.org/10.1007/s00603-011-0206-x
  46. Yin, P., Wong R.H.C. and Chau, K.T. (2014), "Coalescence of two parallel pre-existing surface cracks in granite", J. Rock Mech. Min. Sci., 68, 66-88. https://doi.org/10.1016/j.ijrmms.2014.02.011
  47. Zhang, X.P. and Wong, L.N.Y. (2013), "Crack initiation, propagation and coalescence in rock-like material containing two flaws: A numerical study based on bonded-particle model approach", Rock Mech. Rock Eng., 46(5), 1001-1021. https://doi.org/10.1007/s00603-012-0323-1
  48. Zhou, X.P., Bi, J. and Qian, H. (2015), "Numerical simulation of crack growth and coalescence in rock-like materials containing multiple pre-existing flaws", Rock Mech. Rock Eng., 48(3), 1097-1114. https://doi.org/10.1007/s00603-014-0627-4
  49. Zhou, X.P., Cheng, H. and Feng, Y.F. (2014), "An experimental study of crack coalescence behaviour in rock-like materials containing multiple flaws under uniaxial compression", Rock Mech. Rock Eng., 47(6), 1961-1986. https://doi.org/10.1007/s00603-013-0511-7

피인용 문헌

  1. Optimal design of shape of a working in cracked rock mass vol.24, pp.3, 2021, https://doi.org/10.12989/gae.2021.24.3.227
  2. Hydro-mechanical coupling behaviors in the failure process of pre-cracked sandstone vol.24, pp.6, 2021, https://doi.org/10.12989/gae.2021.24.6.573