참고문헌
- Policies and Strategies for Radioactive Waste Management, IAEA Nuclear Energy Series, International Atomic Energy Agency, Vienna, 2009, p. 81.
- Predisposal Management of Radioactive Waste, IAEA Safety Standards, International Atomic Energy Agency, Vienna, 2009, p. 56.
- Survey of Wet and Dry Spent Fuel Storage, IAEA-TECDOC-1100, International Atomic Energy Agency, Vienna, 1998, p. 103.
- Monograph on Spent Nuclear Fuel Storage Technologies, Institute of Nuclear Materials Management, 1997, p. 270.
- B. Droste, H. Volzke, G. Wieser, L. Qiao, Safety margins of spent fuel transport and storage casks considering aircraft crash impacts, Ramtrans 13 (3-4) (2002) 313-316.
- G. Pugliese, R. LoFrano, G. Forasassi, Spent fuel transport cask thermal evaluation under normal and accident conditions, Nucl. Eng. Des. 240 (6) (June 2010) 1699-1706. https://doi.org/10.1016/j.nucengdes.2010.02.033
- R. Poskas, V. Simonis, P. Poskas, A. Sirvydas, Thermal analysis of CASTOR RBMK-1500 casks during long-term storage of spent nuclear fuel, Ann. Nucl. Energy 99 (2017) 40-46, https://doi.org/10.1016/j.anucene.2016.09.031.
- M. Wataru, H. Takeda, K. Shirai, T. Saegusa, Heat removal verification tests of full-scale concrete casks under accident conditions, Nucl. Eng. Des. 238 (2008) 1206-1212. https://doi.org/10.1016/j.nucengdes.2007.03.035
- R. Lo Frano, G. Pugliese, G. Forasassi, Thermal analysis of a spent fuel cask in different transport conditions, Energy 36 (4) (2011) 2285-2293, https://doi.org/10.1016/j.energy.2010.01.041.
- K.-S. Bang, S.-H. Yu, S.-H. Lee, J.-C. Lee, K.-S. Seo, Experimental investigation of heat removal performance of a concrete storage cask, Ann. Nucl. Energy 85 (November 2015) 679-686, https://doi.org/10.1016/j.anucene.2015.06.024.
- J. Li, Y.Y. Liu, Thermal modeling of a vertical dry storage cask for used nuclear fuel, Nucl. Eng. Des. 301 (May 2016) 74-88, https://doi.org/10.1016/j.nucengdes.2016.01.008.
- J.-C. Lee, K.-S. Bang, K.-S. Seo, H.-D. Kim, B.-I. Choi, H.-Y. Lee, M.-J. Song, Thermal Analysis of a Storage Cask for 24 Spent PWR Fuel Assemblies, in: 14th International Symposium on the Packaging and Transportation of Radioactive Materials (PATRAM 2004), 2004. Berlin, Germany, September 20-24.
- V.G. Rudychev, I.O. Girka, Y.V. Rudychev, A.A. Kaplij, O.P. Shchus, T.O. Sokoltsova, Change of radioactive waste characteristics at their processing and storage at nuclear power plants, Probl. Atom. Sci. Technol. 3 (97) (2015) 83-88.
- S. Alyokhina, V. Goloshchapov, A. Kostikov, Matsevity Yu, Simulation of thermal state of containers with spent nuclear fuel: multistage approach, Int. J. Energy Res. 39 (14) (2015) 1917-1924. DOI: 10.1002/er.3387.
- M. Wataru, H. Takeda, K. Shirai, T. Saegusa, Thermal hydraulic analysis compared with tests of full-scale concrete casks, Nucl. Eng. Des. 238 (2008) 1213-1219, https://doi.org/10.1016/j.nucengdes.2007.03.036.
- S. Alyokhina, A. Kostikov, Equivalent thermal conductivity of the storage basket with spent nuclear fuel of VVER-1000 reactors, Kerntechnik 79 (6) (2014) 484-487, https://doi.org/10.3139/124.110443.
- S. Alyokhina, Safety issues of the dry storage of the spent nuclear fuel, S. Alyokhina, A. Kostikov, S. Kruhlov, Probl. Atom. Sci. Technol. (PAST) 2 (108) (2017) 70-74.
- S. Alyokhina, Unsteady heat exchange at the dry spent nuclear fuel storage, S. Alyokhina, A. Kostikov, Nucl. Eng. Technol. 49 (7) (2017) 1457-1462, https://doi.org/10.1016/j.net.2017.07.029.
피인용 문헌
- Simulation of the Thermal Conditions of Cask with Fuel Assemblies of BN-350 Reactor for Dry Storage vol.2019, pp.None, 2019, https://doi.org/10.1155/2019/3045897
- Reorientation of Hydrides in Unirradiated Clad Tubes Made of Alloy E110 under Conditions Simulating Long-Term Dry Storage of Spent Nuclear Fuel vol.122, pp.9, 2018, https://doi.org/10.1134/s0031918x21090076
- Numerical analysis of forced convection heat transfer in a nuclear fuel storage vault vol.173, pp.None, 2022, https://doi.org/10.1016/j.ijthermalsci.2021.107429