Korean Chemical Engineering Research

The Korean Institute of Chemical Engineers (한국화학공학회)
권호 표지
DOI QR코드

DOI QR Code

Investigating the Partial Substitution of Chicken Feather for Wood Fiber in the Production of Wood-based Fiberboard

목질 섬유판 제조에 있어 도계부산물인 닭털의 목섬유 부분적 대체화 탐색

  • Yang, In (Sicon) ;
  • Park, Dae-Hak (Department of Wood and Paper Science, College of Agriculture, Life & Environments Sciences, Chungbuk National University) ;
  • Choi, Won-Sil (National Instrumentation Center for Environmental Management, Seoul National University) ;
  • Oh, Sei Chang (Department of Forest Resources, College of Life and Environmental Science, Daegu University) ;
  • Ahn, Dong-uk (Department of Animal Science, Iowa State University) ;
  • Han, Gyu-Seong (Department of Wood and Paper Science, College of Agriculture, Life & Environments Sciences, Chungbuk National University) ;
  • Oh, Seung Won (Department of Wood Science & Technology, College of Agriculture & Life Sciences)
  • 양인 ;
  • 박대학 (충북대학교 목재종이과학과) ;
  • 최원실 (서울대학교 농생명과학공동기기원) ;
  • 오세창 (대구대학교 산림자원학과) ;
  • 안동욱 (아이오와주립대학교 동물과학과) ;
  • 한규성 (충북대학교 목재종이과학과) ;
  • 오승원 (전북대학교 목재응용과학과)
  • Received : 2018.04.17
  • Accepted : 2018.06.22
  • Published : 2018.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study was conducted to investigate the potential of chicken feather (CF), which is a by-product in poultry industry, as a partial substitute of wood fiber in the production of wood-based fiberboard. Keratin-type protein constituted the majority of CF, and its appearance did not differ from that of wood fiber. When the formaldehyde (HCHO) adsorptivities of CF compared by its pretreatment type, feather meal (FM), which was pretreated CF with high temperature and pressure and then grounded, showed the highest HCHO adsorptivity. In addition, there was no difference between the adsorbed HCHO amounts, which was measured by dinitrophenylhydrazine method, of scissors-chopped CF and CF beated with an electrical blender. Mechanical properties and HCHO emission of medium-density fiberboards (MDF), which were fabricated with wood fiber and 5 wt% CF, beated CF or FM based on the oven-dried weight of wood fiber, were not influenced by the pretreatment type of CF. However, when the values compared with those of MDF made with just wood fiber, thickness swelling and HCHO emission of the MDF were improved greatly with the addition of CF, beated CF or FM. Based on the results, it might be possible to produce MDF with improved dimensional stability and low HCHO emission if CF, beated CF or FM is added partially as a substitute of wood fiber in the manufacturing process of MDF produced with the conventional urea-formaldehyde resin of $E_1$ grade. However, the use of CF or FM in the production of MDF has a low economic feasibility at the current situation due to the securing difficulty and high cost of CF. In order to enhance the economic feasibility, it requires to use CF produced at small to medium-sized chicken meat plants. More importantly, it is considered that the technology developed from this research has a great potential to make provision for the prohibition of animal-based feed and to dispose environmentally avian influenza-infected poultry.

본 연구는 목질계 섬유판 제조에 있어 목섬유에 대한 도계부산물인 닭털의 부분적 대체화 가능성을 검토하기 위하여 수행하였다. 닭털은 주로 케라틴계 단백질로 구성되어 있으며, 외형적으로 목섬유와 큰 차이는 없었다. 닭털의 전처리 방법에 따른 포름알데히드 흡착능을 비교한 결과, 닭털을 고온/고압에서 처리하고 분쇄한 우모분에서 가장 높았다. 한편 일반 가위로 절단한 닭털과 이를 가정용 믹서로 고해시킨 닭털의 폼알데히드 흡착량을 dinitrophenylhydrazine법으로 측정한 결과 차이는 없었다. 닭털, 고해 닭털, 우모분을 각각 목섬유의 전건무게를 기준으로 5 wt%로 혼합하여 제조한 중밀도섬유판(MDF)의 물성과 폼알데히드방출량은 닭털의 전처리 조건에 영향을 받지 않았다. 그러나 이 측정치를 목섬유만으로 제조한 MDF와 비교하였을 때, 두께팽윤율과 폼알데히드방출량은 크게 개선되었다. 따라서 현재 생산 현장에서 적용되고 있는 요소수지를 이용한 MDF 제조에 있어 목섬유와 함께 일정한 양의 닭털, 고해 닭털 또는 우모분을 첨가할 경우 치수안전성과 폼알데히드방출량이 개선된 MDF의 제조가 가능할 것으로 예상된다. 그러나 MDF제조에 있어 닭털의 사용은 현재 상황에서 목섬유와 비교하여 원료 확보의 어려움과 높은 단가로 경제성이 낮은 것으로 조사되었다. 경제성 향상을 위하여 중소형 도계장에서 발생하는 닭털을 이용하거나, 동물성 사료의 금지에 대한 대비책 및 인플루엔자 감염 조류에 대한 환경적 처리 방안으로 닭털의 섬유판 원료에 대한 부분적 대체화 기술은 향후 사용 가능성이 충분할 것으로 판단된다.

Keywords

References

  1. Korea Wood Panel Association, "Current Status and Task of Plywood & Board Industries," 8th Symposium for Plywood, MDF and Particleboard of South Korea, September, Seoul(2015).
  2. Ministry of Environment, Policy for managing the indoor air-quality of public facilities, ME No. 6911, Sejong(2003).
  3. International Agency for Research on Cancer, IARC classifies formaldehyde as carcinogenic to humans, http://www.iarc.fr/en/mediacentre/pr/2004/pr153.html(2004).
  4. Korean Agency for Technology and Standards, Safety standards for the voluntary safety control of manufacturing products. KATS No. 2015-0123, Eumseong(2015).
  5. Yang, I., Kuo, M. L. and Myers, D. J., "Bond Quality of Soy-based Phenolic Adhesives in Southern Pine Plywood," J. American Oil Chemists' Society, 83(3), 231-237(2006). https://doi.org/10.1007/s11746-006-1198-7
  6. Yang, I., Kuo, M. L., Myers, D. J. and Pu, A. B., "Comparison of Protein-based Adhesive Resins for Wood Composites," J. Wood Science, 52(6), 503-508(2006). https://doi.org/10.1007/s10086-006-0804-5
  7. Yang, I., Ahn, S. H., Choi, I. G., Kim, H. Y. and Oh, S. C., "Adhesives Formulated with Chemically Modified Okara and Phenol-resorcinol-formaldehyde for Bonding Fancy Veneer onto High-density Fiberboard," J. Industrial and Eng. Chem., 15(3), 398-402(2009). https://doi.org/10.1016/j.jiec.2008.12.005
  8. Yang, I., Han, G. S., Ahn, S. H., Choi, I. G., Kim, Y. H. and Oh, S. C., "Adhesive Properties of Medium-density Fiberboards Fabricated with Rapeseed Flour-based Adhesives," J. Adhesion, 90(4), 279-295(2014). https://doi.org/10.1080/00218464.2013.793161
  9. Christiansen, A. W. and Gillespie, R. H., "Potential of Carbohydrates for Exterior-type Adhesives," For. Prod. J., 36(7/8), 20-28(1986).
  10. Oh, Y., Seller Jr., T., Kim, M. G. and Strickland, R. C., "Evaluation of Phenol-formaldehyde OSB Resins Modified with Lignin Residues from Acid-hydrolyzed Waste Newsprint," For. Prod. J., 44(2), 25-29(1994).
  11. Olivares, M., Aceituno, H., Neiman, G., Rivera, E. and Seller Jr., T., "Lignin-modified Phenolic Adhesives for Bonding Radiata Pine Plywood," For. Prod. J., 45(1), 63-67(1995).
  12. Barbosa, A. P., Mano, E. B. and Andrade, C. T., "Tannin-based Resins Modified to Reduce Wood Adhesive Brittleness," For. Prod. J., 50(9), 89-92(2000).
  13. Pizzi, A. and Scharfetter, H. O., "The Chemistry and Development of Tannin-based Adhesives for Exterior Plywood," J. Appl. Polym. Sci., 22(6), 1745-1761(1978). https://doi.org/10.1002/app.1978.070220623
  14. Rho, J. and Lee, J., "Preparation and Bonding Properties of Natural Garlic Adhesives for Wallpaper," J. Adhesion and Interface, 12(4), 125-134(2011).
  15. Que, Z., Furuno, T., Katoh, S. and Nishino, Y., "Evaluation of Three Test Methods in Determination of Formaldehyde Emission from Particleboard Bonded with Different Mole Ratio in the Urea-formaldehyde Resin," Building and Environment, 42(3), 1242-1249(2007). https://doi.org/10.1016/j.buildenv.2005.11.026
  16. Lee, S. M., Park, J. Y., Park, S. B. and Park, B. D., "Development of Technology and Syntheses of Melamine-urea-formaldehyde Resin Adhesives," Research report of Korea Forest Research Institute, Seoul, 10-20(2010).
  17. Kim, K. W., Lee, S. N., Baek, B. S., Lee, B. H., Kim, H. J., Choi, Y. M. and Jang, S. W., "The Formaldehyde VOCs Emission of Particleboard with Cross Linked Vinyl Resin," Adhesion and interface, 9(1), 28-34(2008).
  18. Ahn, S. H., "Effect of Heating Temperature and Time of Coffee Waste on the Adsorptivity of Formaldehyde," J. Korean Wood Sci. Technol., 43(3), 390-399(2015). https://doi.org/10.5658/WOOD.2015.43.3.390
  19. Park, B. D., Kang, E. C. and Park, J. Y. "Formaldehyde Emission of Wood Panel Products with Different Surface Finishing Materials," Journal of Forest Science, 67, 112-116(2004).
  20. Woo, B. J. and Kim, H. J., Imbalance of supply and demand for chicken meat and its spread effect, Korea Rural Economic Institute, Seoul, Republic of Korea(2015).
  21. Lee, J. G. and Lee, S. M., "Evaluation of Soybean Meal or Feather Meal as a Partial Substitute for Fish Meal in Formulated Diets for Fat Cod," J. Aquaculture, 11(4), 421-428(1998).
  22. Jiang, Z., Qin, D. Hse, C. Kuo, M. L., Luo, Z., Wang, G. and Yu, Y., "Preliminary Study on Chicken Feather Protein-based Wood Adhesives," J. Wood Chemistry and Technology, 28, 240-246(2008). https://doi.org/10.1080/02773810802347073
  23. Park, D. H., Yang, I., Choi, W. S., Oh, S. C., Ahn, D. U. and Han, G. S., "Evaluating the Water Resistance of Wood Adhesives Formulated with Chicken Feather Produced from Poultry Industry," J. Korean Wood Sci. Technol., 45(1), 126-138(2017). https://doi.org/10.5658/WOOD.2017.45.1.126
  24. Yang, I., Park, D. H., Choi, W. S., Oh, S. C., Ahn, D. U. and Han, G. S., "Reaction Mechanism and Curing Characteristics of Chicken Feather-based Adhesives and Adhesive Properties of Medium-density Fiberboard Bonded with the Adhesive Resins," Korean Chem. Eng. Res., 55(3), 385-394(2017). https://doi.org/10.9713/KCER.2017.55.3.385
  25. Yang, I., Park, D. H., Choi, W. S., Ahn, D. U., Oh, S. C. and Han, G. S., "Adhesive and Curing Properties of Chicken Feather/blood-based Adhesives for the Fabrication of Medium-density Fiberboards," J. of Adhesion, online(2018).
  26. Kota, K. P., Shaik, S. S., Kota, R. K. and Karlapudi, A. P., "Bioplastic from Chicken Feather Waste," Int. J. Rev. Res., 27(2), 373-375(2014).
  27. Oladele, I. O., Omotoyimbo, J. A. and Ayemidejor, S. H., "Mechanical Properties of Chicken Feather and Cow Hair Fibre Reinforced High Density Polyethylene Composites," Int. J. Sci. Technol. 3(1), 66-72(2014).
  28. Gagan, B., Singh, V. K., Patil, P. P. and Shweta, R., "Water Absorption and Thickness Swelling Characterization of Chicken Feather Fiber and Extracted Fish Residue Powder Filled Epoxy Based Hybrid Biocomposite," Int. J. Waste Resour., 6(3), 1-6(2016).
  29. Canavate, J., Aymerich, J., Garrido, N., Colom, X., Macanas, J., Molins, G., Alvarez, M. D. and Carrillo, F., "Properties and Optimal Manufacturing Conditions of Chicken Feathers/poly(lactic acid) Biocomposites," Composite Materials, 50(12), 1671-1683(2016). https://doi.org/10.1177/0021998315595534
  30. Manpreet, K. M., "Bio-based Nanocomposites from Poultry Feather Keratin," M. S. Thesis, Univ. of Alberta, Edmonton, Alberta(2017).
  31. Bardelline, J., "Researchers Turn Chicken Feathers Into Fiber," https://www.greenbiz.com/news/2009/05/08/researchers-turn-chicken-feathers-fiber(2009).
  32. Shi, B., Shannon, T. G. and Pelky, E., "Novel Use of Waste Keratin and Cotton Linter Fibers for Prototype Tissue Papers and Their Evaluation," Bioresources, 5(3), 1425-1435(2010).
  33. Chakraborty, S., Chowdhury, S. and Saha, P.D. "Biosorption of Hazardous Textile Dyes from Aqueous Solutions by Hen Feathers: Batch and Column Studies," Korean J. Chem. Eng., 29(11), 1567-1576(2012). https://doi.org/10.1007/s11814-012-0049-5
  34. Winandy, J. E., Muehl, J. H., Glaeser, J. A. and Schmidt, W., "Chicken Feather Fiber as an Additive in MDF Composites," J. Natural Fibers, 4(1), 35-48(2007). https://doi.org/10.1300/J395v04n01_04
  35. Taghiyari, H. R., Bari, E., Schmidt, O., Ghanbary, M. A. T., Karimi, A. and Tahir, P., "Effects of Nanowollastonite on Biological Resistance of Particleboard Made from Wood Chips and Chicken Feather Against Antrodia Vaillantii," International Biodeterioration & Biodegradation, 90, 93-98(2014). https://doi.org/10.1016/j.ibiod.2014.02.012
  36. Taghiyari, H. R., Mohammad-Panah, B. and Morrell. J., "Effects of Wollastonite on the Properties of Medium-density Fiberboard (MDF) Made from Wood Fibers and Camel-thorn," Maderas Cienc. Tecnol., 18(1), 157-166(2016).
  37. Association of Official Analytical Chemists, Analytical methods for chemical composition, 15th ed., Academic Press, Inc., Arlington, TX(1990).
  38. National Institute of Forest Science, Determination of formaldehyde emission for wood-based panels, NIFOS, Seoul, Republic of Korea(2014).
  39. Yi, G. H., Yun, I. C., Kim, Y. K., Kim, C. C., Choi, G. J. and Lee, T. S., "Comparison of ACFAS Method and DNPH-LC Method for Quantitative Analysis of Formaldehyde in Drinking Water," J. Korean Soc. Water and Wastewater, 27(6), 827-836(2013). https://doi.org/10.11001/jksww.2013.27.6.827
  40. Korean Agency for Technology and Standards, Fiberboards, KSC, KS F 3200, Eumseong, Chungbuk, Republic of Korea(2011).
  41. Kim, Y. B., Lee, K. S. and Lee, N. H., "Effects of Physical Processing on Protein Content and Pepsin-digestibility of Feather Meals," J. Korean Anim. Sci., 40(1), 103-110(1998).
  42. Nam, K. C., "Current Status and Prospect of Chicken Industry," Personal communication(2016).
  43. Ahn, H. J., "Spread of Avian Influenza and Cost Required for Solving the Disease," Korean Newspaper for farmers and fishermen, http://www.agrinet.co.kr/news/articleView.html?idxno=149582(2016).
  44. http://ec.europa.eu/food/food/biosafety/tse_bse/docs/roadmap_2_en.pdf.
  45. https://www.daera-ni.gov.uk/articles/bse-feed-controls.
  46. https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfCFR/CFRSearch.cfm?CFRPart=589&showFR=1.