Steel and Composite Structures

  • 제28권2호
  • /
  • Pages.139-147
  • /
  • 2018
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Enhancing seismic performance of ductile moment frames with delayed wire-rope bracing using middle steel plate

  • 투고 : 2017.05.30
  • 심사 : 2018.05.14
  • 발행 : 2018.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

Moment frames have considerable ductility against cyclic lateral loads and displacements; however, sometimes this feature causes the relative displacement to exceed the permissible limits. This issue can bring unfavorable hysteretic behavior on the frame due to the reduction in the stiffness and resistance against lateral loads. Most of common bracing systems usually control lateral displacements through increasing stiffness while result in decreasing the capacity for energy absorption. This has direct effect on hysteresis curves of moment frames. Therefore, a system that is capable of both having the capacity of energy absorption as well as controlling the displacements without a considerable increase in the stiffness is quite important. This paper investigates retrofitting of a single-storey steel moment frame using a delayed wire-rope bracing system equipped with the ductile middle steel plate. The steel plate is considered at the middle intersection of wire ropes, where it causes cables to be continuously in tension. This integrated system has the advantage of reducing considerable stiffness of the frame compared to cross bracing systems as a result of which it could also preserve the frame's energy absorption capacity. In this paper, FEM models of a delayed wire-rope bracing system equipped by steel plates with different geometries have been studied, validated, and compared with other researchers' laboratory test results.

키워드

참고문헌

  1. Adam, C. and Jager, C. (2012a), "Seismic collapse capacity of basic inelastic structures vulnerable to the P-delta effect", Earthq. Eng. Struct. Dyn., 41(4), 775-793. https://doi.org/10.1002/eqe.1157
  2. Adam, C. and Jager, C. (2012b), "Simplified collapse capacity assessment of earthquake excited regular frame structures vulnerable to P-delta", Eng. Struct., 44, 159-173. https://doi.org/10.1016/j.engstruct.2012.05.036
  3. AISC (2010), Seismic provisions for structural steel buildings, Chicago, USA.
  4. Akiyama, H. (2002), "Collapse modes of structures under strong motions of earthquakes", Annals Geophys., 45(6), 791-798.
  5. Anagnostides, G., Hargreaves, A.C. and Wyatt, T.A. (1989), "Development and applications of energy absorption devices based on friction", J. Constr. Steel Res., 13(4), 317-336. https://doi.org/10.1016/0143-974X(89)90034-5
  6. Bagheri, S., Barghian, M., Saieri, F. and Farzinfar, A. (2015), "Ushaped metallic-yielding damper in building structures: Seismic behavior and comparison with a friction damper", Structures, 3, 163-171. https://doi.org/10.1016/j.istruc.2015.04.003
  7. Baiguera, M., Vasdravellis, G. and Karavasilis, T.L. (2016), "Dual seismic-resistant steel frame with high post-yield stiffness energy-dissipative braces for residual drift reduction", J. Constr. Steel Res., 122, 198-212. https://doi.org/10.1016/j.jcsr.2016.03.019
  8. Bernal, D. (1987), "Amplification factors for inelastic dynamic p-Δ effects in earthquake analysis", Earthq. Eng. Struct. Dyn., 15(5), 635-651. https://doi.org/10.1002/eqe.4290150508
  9. Bruneau, M., Uang, C.M. and Sabelly, R. (1998), Ductile Design of Steel Structures, (2nd Edition), McGraw-Hill, New York, USA.
  10. Cassianola, D., D'Aniello, M., Rebelo, C., Landolfo, R. and da Silva, L.S. (2016) "Influence of seismic design rules on the robustness of steel moment resisting frames", Steel Compos. Struct., Int. J., 21(3), 479-500. https://doi.org/10.12989/scs.2016.21.3.479
  11. Erochko, J., Christopoulos, C. and Tremblay, R. (2014), "Design, testing, and detailed component modeling of a high-capacity self-centering energy-dissipative brace", J. Struct. Eng., 141(8), 04014193. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001166
  12. Hou, X. and Tagawa, H. (2008), "Wire-rope bracing system with elasto-plastic dampers for seismic response reduction of steel frames", Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, October.
  13. Hou, X. and Tagawa, H. (2009), "Displacement-restraint bracing for seismic retrofit of steel moment frames", J. Constr. Steel Res., 65(5), 1096-1104. https://doi.org/10.1016/j.jcsr.2008.11.008
  14. Husid, R. (1967), "Gravity effects on the earthquake response of yielding structures", Ph.D. Dissertation; California Institute of Technology.
  15. Ibarra, L.F. and Krawinkler, H. (2005), Global collapse of frame structures under seismic excitations; John A. Blume Earthquake Engineering Center, Report No. 152, Department of Civil and Environmental Engineering, Stanford University, CA, USA.
  16. Kanvinde, A.M. (2003), "Methods to evaluate the dynamic stability of structures-shake table tests and nonlinear dynamic analyses", Proceedings of the EERI Meeting, Portland, OR, USA, February.
  17. Kia, M. and Banazadeh, M. (2016), "Closed-form fragility analysis of the steel moment resisting frames", Steel Compos. Struct., Int. J., 21(1), 93-107. https://doi.org/10.12989/scs.2016.21.1.093
  18. Kurata, M., Leon, R.T. and DesRoches, R. (2011), "Rapid seismic rehabilitation strategy: concept and testing of cable bracing with couples resisting damper", J. Struct. Eng., 138(3), 354-362.
  19. Miranda, E. and Akkar, S.D. (2003), "Dynamic instability of simple structural systems", J. Struct. Eng., 129(2), 1722-1727. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:12(1722)
  20. Mousavi, A. and Zahrai, M. (2016), "Contribution of pre-slacked cable braces to dynamic stability of non-ductile frames; an analytical study", Eng. Struct., 117, 305-320. https://doi.org/10.1016/j.engstruct.2016.03.013
  21. Mousavi, A., Zahrai, M. and Saatcioglu, M. (2015), "Toward buckling free tension-only braces using slack free connections", J. Constr. Steel Res., 115, 329-345. https://doi.org/10.1016/j.jcsr.2015.08.048
  22. Mualla, I.H. and Belev, B. (2002), "Performance of steel frames with a new friction damper device under earthquake excitation", Eng. Struct., 24(3), 365-371. https://doi.org/10.1016/S0141-0296(01)00102-X
  23. Razavi, M. and Sheidayii, M.R. (2012), "Seismic performance of cable zipper-braced frames", J. Constr. Steel Res., 74, 49-57. https://doi.org/10.1016/j.jcsr.2012.02.007
  24. Renzi, E., Perno, S., Pantanella, S. and Ciampi, V. (2007), "Design, test and analysis of a light-weight dissipative bracing system for seismic protection of structures", Earthq. Eng. Struct. Dyn., 36(4), 519-539. https://doi.org/10.1002/eqe.641
  25. Ruo-qiang, F., Bin, Y. and Jihong, Y. (2013), "Stability of lamella cylinder cable-braced grid shells", J. Constr. Steel Res., 88, 220-230. https://doi.org/10.1016/j.jcsr.2013.05.019
  26. Tagawa, H. and Hou, X. (2007), "Seismic retrofit of ductile moment resisting frames using wire-rope bracing", Proceedings of the 8th Pacific Conference on Earthquake Engineering, Singapore, December.
  27. Tamai, H. and Takamatsu, T. (2005), "Cyclic loading tests on a non-compression brace considering performance-based seismic design", J. Constr. Steel Res., 61(9), 1301-1317. https://doi.org/10.1016/j.jcsr.2005.01.009

피인용 문헌

  1. Experimental and numerical investigation of wire rope devices in base isolation systems vol.18, pp.3, 2018, https://doi.org/10.12989/eas.2020.18.3.275