Computers and Concrete

  • 제22권1호
  • /
  • Pages.117-122
  • /
  • 2018
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Technical and economical assessment of applying silica nanoparticles for construction of concrete structures

  • 투고 : 2018.03.13
  • 심사 : 2018.05.19
  • 발행 : 2018.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

The use of nanotechnology materials and applications in the construction industry should be considered for enhancing material properties. However, in this paper, the technical and economical assessment of applying silica nanoparticles for construction of concrete structure is studied. In order to obtain the equivalent material properties of the structure, the Mori-Tanaka model is used considering agglomeration of nanoparticles. The effect of using these nanoparticles on mechanical properties of concrete, such as the modulus of elasticity, compressive strength, as well as its indirect effect on armature percentage is investigated. Finally, the price of silica nanoparticles and its effect on the price increase of concrete structure is investigated. The results show that increasing the volume percent of silica nanoparticles up to 10% improves elastic modulus 111% and reduces amateur percentage up to 72%.

키워드

참고문헌

  1. Ahouel, M., Houari, M.S.A., Adda Bedia, E.A. and Tounsi, A. (2016), "Size-dependent mechanical behavior of functionally graded trigonometric shear deformable nanobeams including neutral surface position concept", Steel Compos. Struct., 20(5), 963-981. https://doi.org/10.12989/scs.2016.20.5.963
  2. Attia, A., Tounsi, A., Adda Bedia, E.A. and Mahmoud, S.R. (2015), "Free vibration analysis of functionally graded plates with temperature-dependent properties using various four variable refined plate theories", Steel Compos. Struct., 18(1), 187-212. https://doi.org/10.12989/scs.2015.18.1.187
  3. Babazadeh, A., Burgueno, R. and Silva, P.F. (2016), "Evaluation of the critical plastic region length in slender reinforced concrete bridge columns", Eng. Struct., 125, 280-293. https://doi.org/10.1016/j.engstruct.2016.07.021
  4. Bakhshandeh Amnieh, H. and Zamzam, M.S. (2017), "Theoretical and experimental analysis of wave propagation in concrete blocks subjected to impact load considering the effect of nanoparticles", Comput. Concrete, 20, 711-718.
  5. Belabed, Z., Houari, M.S.A., Tounsi, A., Mahmoud, S.R. and Beg, O.A. (2014), "An efficient and simple higher order shear and normal deformation theory for functionally graded material (FGM) plates", Compos.: Part B, 60, 274-283. https://doi.org/10.1016/j.compositesb.2013.12.057
  6. Beldjelili, Y., Tounsi, A. and Mahmoud, S.R. (2016), "Hygrothermo-mechanical bending of S-FGM plates resting on variable elastic foundations using a four-variable trigonometric plate theory", Smart Struct. Syst., 18(4), 755-786. https://doi.org/10.12989/sss.2016.18.4.755
  7. Belkorissat, I., Houari, M.S.A., Tounsi, A. and Hassan, S. (2015), "On vibration properties of functionally graded nanoplate using a new nonlocal refined four variable model", Steel Compos. Struct., 18(4), 1063-1081. https://doi.org/10.12989/scs.2015.18.4.1063
  8. Bellifa, H., Benrahou, K.H., Bousahla, A.A., Tounsi, A. and Mahmoud, S.R. (2017), "A nonlocal zeroth-order shear deformation theory for nonlinear postbuckling of nanobeams", Struct. Eng. Mech., 62(6), 695-702. https://doi.org/10.12989/SEM.2017.62.6.695
  9. Bellifa, H., Benrahou, K.H., Hadji, L., Houari, M.S.A. and Tounsi, A. (2016), "Bending and free vibration analysis of functionally graded plates using a simple shear deformation theory and the concept the neutral surface position", J. Brazil. Soc. Mech. Sci. Eng., 38(1), 265-275. https://doi.org/10.1007/s40430-015-0354-0
  10. Bennoun, M., Houari, M.S.A. and Tounsi, A. (2016), "A novel five variable refined plate theory for vibration analysis of functionally graded sandwich plates", Mech. Advan. Mater. Struct., 23(4), 423-431. https://doi.org/10.1080/15376494.2014.984088
  11. Bessaim, A., Houari, M.S.A. and Tounsi, A. (2013), "A new higher-order shear and normal deformation theory for the static and free vibration analysis of sandwich plates with functionally graded isotropic face sheets", J. Sandw. Struct. Mater., 15(6), 671-703. https://doi.org/10.1177/1099636213498888
  12. Besseghier, A., Houari, M.S.A., Tounsi, A. and Hassan, S. (2017), "Free vibration analysis of embedded nanosize FG plates using a new nonlocal trigonometric shear deformation theory", Smart Struct. Syst., 19(6), 601-614. https://doi.org/10.12989/SSS.2017.19.6.601
  13. Bouafia, Kh., Kaci, A., Houari M.S.A. and Tounsi, A. (2017), "A nonlocal quasi-3D theory for bending and free flexural vibration behaviors of functionally graded nanobeams", Smart Struct. Syst., 19, 115-126. https://doi.org/10.12989/sss.2017.19.2.115
  14. Bouderba, B., Houari, M.S.A. and Tounsi, A. (2013), "Thermomechanical bending response of FGM thick plates resting on Winkler-Pasternak elastic foundations", Steel Compos. Struct., 14(1), 85-104. https://doi.org/10.12989/scs.2013.14.1.085
  15. Bouderba, B., Houari, M.S.A., Tounsi, A. and Mahmoud, S.R. (2016b), "Thermal stability of functionally graded sandwich plates using a simple shear deformation theory", Struct. Eng. Mech., 58(3), 397-422. https://doi.org/10.12989/sem.2016.58.3.397
  16. Boukhari, A., Atmane, H.A., Tounsi, A., Adda Bedia, E.A. and Mahmoud, S.R. (2016), "An efficient shear deformation theory for wave propagation of functionally graded material plates", Struct. Eng. Mech., 57(5), 837-859. https://doi.org/10.12989/sem.2016.57.5.837
  17. Bounouara, F., Benrahou, K.H., Belkorissat, I. and Tounsi A. (2016), "A nonlocal zeroth-order shear deformation theory for free vibration of functionally graded nanoscale plates resting on elastic foundation", Steel Compos. Struct., 20(2), 227-249. https://doi.org/10.12989/scs.2016.20.2.227
  18. Bourada, M., Kaci, A., Houari, M.S.A. and Tounsi, A. (2015), "A new simple shear and normal deformations theory for functionally graded beams", Steel Compos. Struct., 18(2), 409-423. https://doi.org/10.12989/scs.2015.18.2.409
  19. Bousahla, A.A., Benyoucef, S., Tounsi, A. and Mahmoud, S.R. (2016a), "On thermal stability of plates with functionally graded coefficient of thermal expansion", Struct. Eng. Mech., 60(2), 313-335. https://doi.org/10.12989/sem.2016.60.2.313
  20. Chikh, A., Tounsi, A., Hebali, H. and Mahmoud, S.R. (2017), "Thermal buckling analysis of cross-ply laminated plates using a simplified HSDT", Smart Struct. Syst., 19(3), 289-297. https://doi.org/10.12989/sss.2017.19.3.289
  21. Draiche, K., Tounsi, A. and Mahmoud, S.R. (2016), "A refined theory with stretching effect for the flexure analysis of laminated composite plates", Geomech. Eng., 11, 671-690. https://doi.org/10.12989/gae.2016.11.5.671
  22. El-Haina, F., Bakora, A., Bousahla, A.A. and Hassan, S. (2017), "A simple analytical approach for thermal buckling of thick functionally graded sandwich plates", Struct. Eng. Mech., 63(5), 585-595. https://doi.org/10.12989/SEM.2017.63.5.585
  23. Flores, I., Sobolev, K., Torres, L.M., Valdez, P.L., Zarazua, E. and Cuellar, E.L. (2010), "Performance of cement systems with Nano-$SiO_2$ particles produced using Sol-gel method", TRB First International Conference in North America on Nanotechnology in Cement and Concrete, Irvine, California, USA, May.
  24. Jo, B.W., Kim, C.H. and Lim, J.H. (2007), "Investigations on the development of powder concrete with nano-$SiO_2$ particles", KSCE J. Civil Eng., 11, 37-42. https://doi.org/10.1007/BF02823370
  25. Khetir, H., Bouiadjra, M.B., Houari, M.S.A., Tounsi, A. and Mahmoud, S.R. (2017), "A new nonlocal trigonometric shear deformation theory for thermal buckling analysis of embedded nanosize FG plates", Struct. Eng. Mech., 64(4), 391-402. https://doi.org/10.12989/SEM.2017.64.4.391
  26. Larbi Chaht, F., Kaci, A., Houari M.S.A. and Hassan, S. (2015), "Bending and buckling analyses of functionally graded material (FGM) size-dependent nanoscale beams including the thickness stretching effect", Steel Compos. Struct., 18(2), 425-442. https://doi.org/10.12989/scs.2015.18.2.425
  27. Liu, H., Ma, J. and Huang, W. (2018), "Sensor-based complete coverage path planning in dynamic environment for cleaning robot", CAAI Tran. Intell. Technol., 3, 65-72. https://doi.org/10.1049/trit.2018.0009
  28. Mahi, A., Bedia, E.A.A. and Tounsi, A. (2015), "A new hyperbolic shear deformation theory for bending and free vibration analysis of isotropic, functionally graded, sandwich and laminated composite plates", Appl. Math. Model., 39, 2489-2508. https://doi.org/10.1016/j.apm.2014.10.045
  29. Mart, J. and Mijangos, C. (2009), "Tailored polymer-based nanofibers and nanotubes by means of different infiltration methods into alumina nanopores", Langmuir, 25, 1181-1187. https://doi.org/10.1021/la803127w
  30. Mehri, M., Asadi, H. and Wang, Q. (2016), "Buckling and vibration analysis of a pressurized CNT reinforced functionally graded truncated conical shell under an axial compression using HDQ method", Comput. Meth. Appl. Mech. Eng., 303, 75-100. https://doi.org/10.1016/j.cma.2016.01.017
  31. Menasria, A., Bouhadra, A., Tounsi, A. and Hassan, S. (2017), "A new and simple HSDT for thermal stability analysis of FG sandwich plates", Steel Compos. Struct., 25(2), 157-175. https://doi.org/10.12989/SCS.2017.25.2.157
  32. Meziane, M.A.A., Abdelaziz, H.H. and Tounsi, A.T. (2014), "An efficient and simple refined theory for buckling and free vibration of exponentially graded sandwich plates under various boundary conditions", J. Sandw. Struct. Mater., 16(3), 293-318. https://doi.org/10.1177/1099636214526852
  33. Mori, T. and Tanaka, K. (1973), "Average stress in matrix and average elastic energy of materials with misfitting inclusions", Acta Metall. Mat., 21, 571-574. https://doi.org/10.1016/0001-6160(73)90064-3
  34. Mouffoki, A., Adda Bedia, E.A., Houari M.S.A. and Hassan, S. (2017), "Vibration analysis of nonlocal advanced nanobeams in hygro-thermal environment using a new two-unknown trigonometric shear deformation beam theory", Smart Struct. Syst., 20(3), 369-383. https://doi.org/10.12989/SSS.2017.20.3.369
  35. Padhy, S. and Panda, S. (2017), "A hybrid stochastic fractal search and pattern search technique based cascade PI-PD controller for automatic generation control of multi-source power systems in presence of plug in electric vehicles", CAAI Trans. Intell. Technol., 2, 12-25 . https://doi.org/10.1016/j.trit.2017.01.002
  36. Rishikeshan, C.A. and Ramesh, H. (2017), "A novel mathematical morphology based algorithm for shoreline extraction from satellite images", Geo-spatial Inform. Sci., 20, 345-352. https://doi.org/10.1080/10095020.2017.1403089
  37. Sanchez, F. and Sobolev, K. (2010), "Nanotechnology in concrete -A review", Constr. Build. Mater., 24, 2060-2071. https://doi.org/10.1016/j.conbuildmat.2010.03.014
  38. Scrivener, K.L. (2009), "Nanotechnology and cementitious materials", Proceed NICOM3, the 3rd International Symposium Nanotech. Const., Prague, Czech Republic.
  39. Shi, D.L. and Feng, X.Q. (2004), "The effect of nanotube waviness and agglomeration on the elastic property of carbon nanotube-reinforced composties", J. Eng. Mater. Tech., 126, 250-270. https://doi.org/10.1115/1.1751182
  40. Shokravi, M. (2017), "Vibration analysis of silica nanoparticlesreinforced concrete beams considering agglomeration effects", Comput. Concrete, 19, 333-338. https://doi.org/10.12989/cac.2017.19.3.333
  41. Torres-Jimenez, J. and Rodriguez-Cristerna, A. (2017), "Metaheuristic post-optimization of the NIST repository of covering arrays", CAAI Trans. Intell. Technol., 2, 31-38 . https://doi.org/10.1016/j.trit.2016.12.006
  42. Trtik, P. and Bartos, P.J.M. (2001), "Nanotechnology and concrete: what can we utilise from the upcoming technologies?", Proceedings of thed 2nd Annamaria Workshop: Cement Concrete : Trends & Challenges.
  43. Wen, Q., He, J., Guan, Sh., Chen, T., Hu, Y., Wu, W., Liu, F. and Qiao, Y. (2017), "The TripleSat constellation: a new geospatial data service model", Geo-spatial Inform. Sci., 20, 163-173. https://doi.org/10.1080/10095020.2017.1329266
  44. Yang, H. and Yu, L. (2017), "Feature extraction of wood-hole defects using wavelet-based ultrasonic testing", J. Forest. Res., 28, 395-402. https://doi.org/10.1007/s11676-016-0297-z
  45. Zamani Nouri, A. (2018), "The effect of $Fe_2O_3$ nanoparticles instead cement on the stability of fluid-conveying concrete pipes based on exact solution", Comput. Concrete, 21, 31-37.
  46. Zemri, A., Houari, M.S.A., Bousahla, A.A. and Tounsi A. (2015), "A mechanical response of functionally graded nanoscale beam: an assessment of a refined nonlocal shear deformation theory beam theory", Struct. Eng. Mech., 54(4), 693-710. https://doi.org/10.12989/sem.2015.54.4.693
  47. Zhao, B., Gao, L., Liao, W. and Zhang, B. (2017), "A new kernel method for hyperspectral image feature extraction", Geo-spatial Inform. Sci., 20, 309-318. https://doi.org/10.1080/10095020.2017.1403088
  48. Zhou, X., Liu, J., Wang, X. and Frank Chen, Y. (2016), "Behavior and design of slender circular tubed-reinforced-concrete columns subjected to eccentric compression", Eng. Struct., 124, 1 17-28.
  49. Zidi, M., Tounsi, A. and Beg, O.A. (2014), "Bending analysis of FGM plates under hygro-thermo-mechanical loading using a four variable refined plate theory", Aerosp. Sci. Tech., 34, 24-34. https://doi.org/10.1016/j.ast.2014.02.001