Journal of the Microelectronics and Packaging Society (마이크로전자및패키징학회지)

The Korean Microelectronics and Packaging Society (한국마이크로전자및패키징학회)
권호 표지
DOI QR코드

DOI QR Code

Aluminum alloys and their joining methods

알루미늄 합금과 그 접합 방법

  • Jung, Do-hyun (Department of Materials Science and Engineering, University of Seoul) ;
  • Jung, Jae Pil (Department of Materials Science and Engineering, University of Seoul)
  • 정도현 (서울시립대학교 신소재공학과) ;
  • 정재필 (서울시립대학교 신소재공학과)
  • Received : 2018.06.22
  • Accepted : 2018.06.27
  • Published : 2018.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

Aluminum (Al) and its alloys have been used widely in a variety of industries such as structural, electronic, aerospace, and particularly automotive industries due to their lightweight characteristic, outstanding ductility, formability, high oxidation and corrosion resistance, and high thermal and electrical conductivity. Al have different kinds of alloys according to the various additional elements system and they should be selected properly depending on their effectiveness and suitability for their particular purpose. The major elements for Al alloys are silicon (Si), magnesium (Mg), manganese (Mn), copper (Cu), and zinc (Zn). In order for Al alloys to use for each industry, it is necessary to study of Al to Al joining and/or the Al to dissimilar materials joining to combine the individual parts into one. Many studies on joining technologies about Al to Al and Al to dissimilar materials have been performed such as press joining, bolted joint, welding, soldering, riveting, adhesive bonding, and brazing. This study reviews a variety of Al alloys and their joining method including its principles and properties with recent trends.

Keywords

References

  1. P. Ebrahimzad, M. Ghasempar, and M. Balali, "Friction stir processing of aerospace aluminum alloy by addition of carbon nano tube", Trans. Indian. Inst. Met., 70(9), 2241 (2017). https://doi.org/10.1007/s12666-017-1062-5
  2. I. N. Fridlyander, V. G. Sister, O. E. Grushko, V. V. Berstenev, L. M. Sheveleva, and L. A. Ivanova, "Aluminum alloys:Promising materials in the automotive industry", Met. Sci. Heat Treat., 44(9), 365 (2002). https://doi.org/10.1023/A:1021901715578
  3. J. H. Park, K. J. Kim, J. W. Lee, and J. K. Yoon, "Light-weightdesign of automotive suspension link based on design of experiment", Int. J. Auto. Technol., 16(1), 67 (2015). https://doi.org/10.1007/s12239-015-0007-4
  4. H. T. Kim and S. C. Kil, "High efficient welding technology of the car bodies", J. Weld. Join., 34(4), 62 (2016). https://doi.org/10.5781/JWJ.2016.34.4.62
  5. S. M. Emami, M. Divandari, H. Arabi, and E. Hajjari, "Effect of melt-to-solid insert volume ratio on Mg/Al dissimilar metals bonding", J. Mater. Eng. Perf., 22(1), 123 (2013). https://doi.org/10.1007/s11665-012-0243-y
  6. Z. Zhu, K. Y. Lee, and X. Wang, "Ultrasonic welding of dissimilar metals, AA6061", Int. J. Adv. Manuf. Technol., 59(5), 569 (2012). https://doi.org/10.1007/s00170-011-3534-9
  7. A. Sharma, Y. S. Shin, and J. P. Jung, "Influence of various additional elements in Al based filler alloys for automotive and brazing industry", J. Weld. Join., 33(5), 1 (2015). https://doi.org/10.5781/JWJ.2015.33.5.1
  8. A. Sharma and J. P. Jung, "Possibility of Al-Si brazing alloys for industrial microjoining applications", J. Microelectron. Packag. Soc., 24(3), 1 (2017). https://doi.org/10.6117/kmeps.2017.24.1.001
  9. A. Sharma and J. P. Jung, "Aluminium based brazing fillers for high temperature electronic packaging applications", J. Microelectron. Packag. Soc., 22(4), 1 (2015). https://doi.org/10.6117/kmeps.2015.22.4.001
  10. D. Y. Su, H. J. Jin, and S. J. Wu, "Microstructure and mechanical properties of 2219 aluminum alloy VPTIG welds during cyclic thermal treatment", Rare Metals, (2015).
  11. L. Q. Niu, X. Y. Li, L. Zhang, X. B. Liang, and M. Li, "Correlation between microstructure and mechanical properties of 2219-T8 aluminum alloy joints by VPTIG welding", Acta Metall. Sin. (Engl. Lett.), 30(5), 438 (2017). https://doi.org/10.1007/s40195-016-0516-9
  12. J. P. Martins, A. L. M. Carvalho, and A. F. Padilha, "Microstructure and texture assessment of Al-Mn-Fe-Si (3003) aluminum alloy produced by continuous and semicontinuouscasting processes", J. Mater. Sci., 44(11), 2966 (2009). https://doi.org/10.1007/s10853-009-3393-z
  13. M. Gunyuz, H. Mollaoglu, and A. Ulus, "Improvement of corrosion resistance in modified 3003 aluminum alloys produced by twin roll casting under different casting parameters", Light Metals, 1255 (2015).
  14. A. Sharma, M. H. Roh, D. H. Jung, and J. P. Jung, "Effect of $ZrO_{2}$ nanoparticles on the microstructure of Al-Si-Cu filler for low-temperature Al brazing applications", Metall. Mater. Trans. A., 47(1), 510 (2016). https://doi.org/10.1007/s11661-015-3233-5
  15. E. Guo, G. Cao, Y. Feng, L. Wang, G. Wang, and X. Lv, "Modification of Sr on 4004 aluminum alloy", JOM, 65(5), 613 (2013). https://doi.org/10.1007/s11837-013-0580-9
  16. S. Niu, S. Chen, H. Dong, D. Zhao, X. Zhang, X. Guo, and G. Wang, "Microstructure and properties of lap joint between aluminum alloy and galvanized steel by CMT", J. Mater. Eng. Perf., 25(5), 1839 (2016). https://doi.org/10.1007/s11665-016-2035-2
  17. S. Shanavas, J. E. Raja, and N. Murugan, "Weldability of marine grade AA 5052 aluminum alloy by underwater friction stir welding", Int. J. Adv. Manuf. Technol., 95(9), 4535 (2018). https://doi.org/10.1007/s00170-017-1492-6
  18. J. Shim, B. Kang, and I. Kim, "Characteristics of 5052 aluminum alloy sheets joint using electromagnetic force", J. Mecha. Sci. Technol., 31(7), 3437 (2017). https://doi.org/10.1007/s12206-017-0632-0
  19. S. P. Chen, K. M. Mussert, and S. V. Zwaag, "Precipitation kinetics in Al6061 and in an Al6061-alumina particle composite", J. Mater. Sci., 33(18), 4477 (1998). https://doi.org/10.1023/A:1004414413800
  20. A. K. Mishra, and R. K. Srivastava, "Wear behaviour of Al-6061/SiC metal matrix composites", J. Inst. Eng. India Ser. C, 98(2), 97 (2017). https://doi.org/10.1007/s40032-016-0284-3
  21. Y. Kim, K. Park, and S. Kwak, "Mechanical fastening and joining technologies to using multi mixed materials of car body", J. Weld. Join., 33(3), 12 (2015). https://doi.org/10.5781/JWJ.2015.33.3.12
  22. B. Xing, X. He, K. Zeng, and Y. Wang, "Mechanical properties of self-piercing riveted joints in aluminum alloy 5052", Int. J. Adv. Manuf. Technol., 75(1), 351 (2014). https://doi.org/10.1007/s00170-014-6152-5
  23. F. Ding and H. Yong, "Study on activating TIG welding for aluminium alloys", Weld. World., 49(1), 22 (2005).
  24. Z. Lu, P. Huang, W. Gao, Y. Li, H. Zhang, and S. Yin, "ARC welding method for bonding steel with aluminum", Front. Mech. Eng. China., 4(2), 134 (2009). https://doi.org/10.1007/s11465-009-0033-x
  25. S. Lin, J. Song, G. Ma, and C. Yang, "Dissimilar metals TIG welding-brazing of aluminum alloy to galvanized steel", Front. Mater. Sci. China., 3(1), 78 (2009). https://doi.org/10.1007/s11706-009-0007-2
  26. I. Sevim, F. Hayat, Y. Kaya, N. Kahraman, and S. Sahin, "The study of MIG weldability of heat-treated aluminum alloys", Int. J. Adv. Manuf. Technol., 66(9), 1825 (2013). https://doi.org/10.1007/s00170-012-4462-z
  27. G. Turichin, E. Valdaytseva, and I. Tzibulsky, "Simulation and technology of hybrid welding of thick steel parts with high power fiber laser", Phys. Procedia., 12(A), 646 (2011). https://doi.org/10.1016/j.phpro.2011.03.081
  28. D. Sakurada, K. Katoh, and H. Tokisue, "Underwater friction welding of 6061 aluminum alloy", J. Jpn. Inst. Light Met., 51(1), 2 (2002).
  29. S. Sabari, S. Malarvizhi, V. Balasubramanian, and G. Reddy, "Experimental and numerical investigation on under-water friction stir welding of armour grade AA2519-T87 aluminium alloy", Deff. Technol., 12(4), 324 (2016). https://doi.org/10.1016/j.dt.2016.02.003
  30. S. Lee, D. H. Jung, and J. P. Jung, "Aluminum brazing and its principle", J. Microelectron. Packag. Soc., 24(4), 1 (2017). https://doi.org/10.6117/kmeps.2017.24.1.001
  31. A. Iniesta, D. Mendoza, J. Romero, and L. Gonzalez, "Multi-objective optimization of an aluminum torch brazing process by means of genetic programming and R-NSGA-II", Int. J. Adv. Manuf. Technol., 91(9), 4117 (2017). https://doi.org/10.1007/s00170-017-0102-y
  32. D. Wei, X. Bai, L. Yuan, L. Bin, and W. Qing, "Torch brazing 3003 aluminum alloy with Zn-Al filler metal", Trans. Non-ferrous Met. Soc. China., 22(1), 30 (2012). https://doi.org/10.1016/S1003-6326(11)61135-7

Cited by

  1. 이차전지 전극용 Al-Cu의 레이저 용접 vol.26, pp.4, 2018, https://doi.org/10.6117/kmeps.2019.26.4.001