풍력에너지저널 (Journal of Wind Energy)

  • 제9권1호
  • /
  • Pages.14-19
  • /
  • 2018
  • /
  • 2093-5099(pISSN)
  • /
  • 2733-9467(eISSN)
한국풍력에너지학회 (Korea Wind Energy Association)
권호 표지

평각동선을 사용하는 대용량발전기 고정자 권선의 손실 감소 설계

Loss Reduction Design of Stator Winding for Large Capacity Generator using Flat Type Copper Wire

  • 김영민 (유니슨(주), 풍력연구소) ;
  • 김정수 (유니슨(주), 풍력연구소) ;
  • 임민수 (유니슨(주), 풍력연구소) ;
  • 황진수 (유니슨(주), 풍력연구소) ;
  • 방조혁 (유니슨(주), 풍력연구소) ;
  • 류지윤 (유니슨(주), 풍력연구소)
  • 투고 : 2017.08.16
  • 심사 : 2018.02.14
  • 발행 : 2018.03.31

⟨ 이전 논문 다음 논문 ⟩

초록

A generator is an internal electrical device, and it is important to reduce generator loss to improve the total efficiency of wind turbines. Some strategies to reduce generator loss using shape optimization and high class silicon steel plate have been proposed, but these methods have the disadvantages of being expensive and difficult to produce. Therefore, a new method is needed for generator loss reduction with minimum cost and easy production. In this paper, a new method is proposed to decrease stator coil loss for generator loss reduction. An optimized flat type copper wire arrangement based on a high capacity generator with multiple flat type copper wires for one turn of the stator coil has been developed using evolution strategy optimization. Also, electromagnetic field analysis was processed using a finite element tool to verify the electromagnetic field characteristics. Moreover, to verify the effect, the proposed method was proved compared with the general arrangement.

키워드

과제정보

연구 과제 주관 기관 : 한국에너지기술평가원(KETEP)

참고문헌

  1. Jang, J. I., Joe, G. M., Choi, J. S., and Kim, H. C., 2011, "Development and Performance Test of Gearless PMSG for Wind Turbine Generator System", Journal of Wind Energy, Vol. 2, No. 2, pp. 48-53 (in Korean).
  2. Ryu, J. H., and Kim, S. C., 2014, "Status of offshore wind power market and technology trends", Journal of Wind Energy, Vol. 5, No. 1, pp. 5-11 (in Korean).
  3. Nakano, M., Kometani, H., and Kawamura, M., 2006, "A Study on eddy current losses in rotors of surface permanent-magnet synchronous machines", IEEE Trans. Ind. Appl., Vol. 42, No. 2, pp. 429-435. https://doi.org/10.1109/TIA.2006.870037
  4. Cyselinck, J., Vindevelde, L., and Melkebeek, J., 1999, "Calculation of Eddy Current and Associated Losses in Electrical Steel Laminations", IEEE Transactions on Magnetics, Vol. 35, No. 3, pp. 1191-1194. https://doi.org/10.1109/20.767162
  5. Yamazaki, K., and Seto, Y., 2006, "Iron loss analysis of interior permanent magnet synchronous motors - Variation of main loss factors due to driving condition", IEEE Trans. Ind. Appl., Vol. 4, No. 4, pp. 1045-1052,.
  6. Jun, H. W., Park, E. S., Lee, J., and Lee, H. W., 2015, "Study on the high efficiency design through the loss reduction of the 110kW class high-output density PMSM", The transactions of the Korean Institute of Electrical Engineers, Vol. 64, No. 6, pp. 951-959.
  7. Kasper, M., 1992, "Shape optimization by evolution strategy," IEEE Trans. Magn., vol. 28, no. 2, pp. 1556-1559. https://doi.org/10.1109/20.123995
  8. Bhattachary, S., Mascarella, D., and Joos, G., 2014, "Interleaved SVPWM and DPWM for Dual Three-Phase Inverter-PMSM: An Automotive Application", IEEE Transportation Electrification Conference and Expo (ITEC), Dearborn, MI, USA, 6/15-6/18, pp. 1-6.