References
- Handbook, M. (1990). Properties and selection: Irons steels and high performance alloys, Vol. 1; ASM International. Handbook Committee.
- Bhadeshia HKDH. Bainite in steels. London: The Institute of Materials; 1992. p. 329-46.
- S. K. Das, A. Joarder, A. Mitra, Magnetic Barkhausen emissions and microstructural degradation study in 1.25 Cr-0.50 Mo steel during high temperature exposure. NDT & E Int., 37(3) (2004) 243-248. https://doi.org/10.1016/S0963-8695(03)00032-X
- S. H. Bak, M. J. Kim, J. H. Lee, S. J. Bong, S. K. Kim, D. B. Lee, High-temperature Oxidation Kinetics and Scales Formed on Fe-2.3% Cr-1.6% W Alloy. J. Korean Ceram. Soc., 48(1) (2011) 57-62. https://doi.org/10.4191/KCERS.2011.48.1.057
-
A. del Carmen Wong-Moreno, A. B. Luisillo, Hightemperature oxidation of 1.25 Cr-0.5 Mo steel in
$SO_2$ , Oxid. Met., 35(3-4) (1991) 245-258. https://doi.org/10.1007/BF00738288 -
A. Jardnas, J. E. Svensson, L. G. Johansson, Evidence for suppression of the oxidation of a Fe 2.25 Cr 1 Mo steel by traces of
$SO_2$ , In Materials science forum, 369, Trans Tech Publ., (2001) 173-180. -
A. Skalli, A. Galerie, M. Caillet, Thermal corrosion of a chromium-molybdenum steel by
$SO_2$ . Kinetic, thermodynamic and morphological aspects. Solid State Ionics, 34(4) (1989) 261-267. https://doi.org/10.1016/0167-2738(89)90453-0 - D. B. Lee, High-temperature Corrosion by Chlorides in Biomass-fired Plants. J. Kor. Inst. Surf. Eng., 49 (2016) 14-19. https://doi.org/10.5695/JKISE.2016.49.1.14
- P. Viklund, Superheater corrosion in biomass and waste fired boilers: characterisation, causes and prevention of chlorine-induced corrosion. Diss. KTH R. Inst. Technol., (2013) 6.
- S. M. Bruemmer, B. W. Arey and L. A. Charlot. Influence of chromium depletion on intergranular stress corrosion cracking of 304 stainless steel, Corros., 48 (1992) 42-49. https://doi.org/10.5006/1.3315917
- S. Zhang, T. Shibata, T. Haruna, Initiation and propagation of IGSCC for sensitized type 304 stainless steel in dilute sulfate solutions, Corros. Sci., 39 (1997) 1725-1739. https://doi.org/10.1016/S0010-938X(97)00078-4
- A. Y. Kina, V. M. Souza, S. S. M. Tavares, J. M. Pardal, J. A. Souza, Microstructure and intergranular corrosion resistance evaluation of AISI 304 steel for high temperature service, Mater. charact., 59 (2008) 651-655. https://doi.org/10.1016/j.matchar.2007.04.004
- K. G. Nam, Y. S. He, J. C. Chang, K. S. Shin, Microstructural Evolution of Super304H Steel upon Long-Term Aging, Key Eng. Mater., 727 (2017) 36-42. https://doi.org/10.4028/www.scientific.net/KEM.727.36
- X. Bai, J. Pan, G. Chen, J. Liu, J. Wang, T. Zhang, W. Tang, Effect of high temperature aging on microstructure and mechanical properties of HR3C heat resistant steel, Mater. Sci. and Tech., 30 (2014) 205-210. https://doi.org/10.1179/1743284713Y.0000000347
- D. A. Jones, Principles and prevention of corrosion. (1992) Macmillan.
- A. Iseda, H. Okada, H. A. Semba, M. Igarashi, Long term creep properties and microstructure of SUPER304H, TP347HFG and HR3C for A-USC boilers, Energy Mater., 2 (2007) 199-206. https://doi.org/10.1179/174892408X382860
- M. Farooq, Strengthening and degradation mechanisms in austenitic stainless steels at elevated temperature, Diss. KTH Royal Institute of Technology (2013) 26.
- E. A. Trillo, L. E. Murr, Effects of carbon content, deformation, and interfacial energetics on carbide precipitation and corrosion sensitization in 304 stainless steel, Acta mater., 47 (1998) 235-245. https://doi.org/10.1016/S1359-6454(98)00322-X
- E. A. Trillo, R. Beltran, J. G. Maldonado, R. J. Romero, L. R. Murr, W. W. Fisher, A. H. Advani, Combined effects of deformation (strain and strain state), grain size, and carbon content on carbide precipitation and corrosion sensitization in 304 stainless steel, Mater. Charact., 35 (1995) 99-112. https://doi.org/10.1016/1044-5803(95)00072-0
- H. Tanaka, M. Murata, F. Abe, H. Irie, Microstructural evolution and change in hardness in type 304H stainless steel during long-term creep, Mater. Sci. and Eng., A 319 (2001) 788-791.
-
X. Xiao, G. Liu, B. Hu, J. Wang, W. Ma, Coarsening behavior for
$M_{23}C_6$ carbide in 12% Cr-reduced activation ferrite/martensite steel: experimental study combined with DICTRA simulation, J. Mater. Sci., 48 (2013) 5410-5419. https://doi.org/10.1007/s10853-013-7334-5 -
W. Wang, Z. Wang, W. Li, J. Tian, W. Zhong, J. Lin, "Evolution of
$M_{23}C_6$ phase in HR3C steel aged at$650^{\circ}C$ ." Mater. High Temp., 33 (2016) 276-282. https://doi.org/10.1080/09603409.2016.1189023 - N. Otsuka, Fracture behavior of steam-grown oxide scales formed on 2-12% Cr steels. Materials at High Temperatures, 22(1-2) (2005) 131-138. https://doi.org/10.3184/096034005782750563