DOI QR코드

DOI QR Code

Variations in the hysteretic behavior of LRBs as a function of applied loading

  • Ozdemir, Gokhan (Dept. of Civil Eng., Anadolu University) ;
  • Bayhan, Beyhan (Dept. of Civil Eng., Bursa Technical University) ;
  • Gulkan, Polat (Dept. of Civil Eng., Middle East Technical University, Northern Cyprus Campus)
  • 투고 : 2017.10.03
  • 심사 : 2018.04.13
  • 발행 : 2018.07.10

초록

The study presented herein focused on the change in hysteretic force-deformation behavior of lead rubber bearings (LRBs). The material model used to idealize response of LRBs under cyclic motion is capable of representing the gradual attrition in strength of isolator unit on account of lead core heating. To identify the effect of loading history on the hysteretic response of LRBs, a typical isolator unit is subjected to cyclic motions with different velocity, amplitude and number of cycles. Furthermore, performance of an LRB isolated single degree of freedom system is studied under different seismic input levels. Finally, the significance of lead core heating effect on LRBs is discussed by considering the current design approach for base isolated structures. Results of this study show that the response of an LRB is governed strongly by the amplitude and number of cycles of the motion and the considered seismicity level.

키워드

참고문헌

  1. Abe, M., Yoshida, J. and Fujino, Y. (2004), "Multiaxial behaviors of laminated rubber bearings and their model. II: Modeling", J. Struct. Eng., 130(8), 1133-1144. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:8(1133)
  2. Ahmadipour, M. and Alam, M.S. (2017), "Sensitivity analysis on mechanical characteristics of lead-core steel-reinforced elastomeric bearings under cyclic loading", Eng. Struct., 140, 39-50. https://doi.org/10.1016/j.engstruct.2017.02.014
  3. ASCE, American Society of Civil Engineers (2010), ASCE/SEI-7-10 Minimum Design Loads for Buildings, Reston, Virginia, U.S.A.
  4. Chang, K.C., Tsai, M.H., Hwang, J.S. and Wei, S.S. (2003), "Field testing of a seismically isolated concrete bridge", Struct. Eng. Mech., 16(3), 241-257. https://doi.org/10.12989/sem.2003.16.3.241
  5. Constantinou, M.C., Whittaker, A.S., Kalpakidis, I.V., Fenz, D.M. and Warn, G.P. (2007), Performance of Seismic Isolation Hardware under Service and Seismic Loading, Technical Report MCEER-07-0012, Multidisciplinary Center for Earthquake Engineering Research, Department of Civil, Structural and Environmental Engineering, State University of New York at Buffalo, U.S.A.
  6. Grant, D.N., Fenves, G.L. and Whittaker, A.S. (2004), "Bidirectional modeling of high-damping rubber bearings", J. Earthq. Eng., 8(1), 161-185.
  7. Hancock, J., Bommer, J.J. and Stafford, P.J. (2008), "Numbers of scaled and matched accelerograms required for inelastic dynamic analyses", Earthq. Eng. Struct. Dyn., 37(14), 1585-1607. https://doi.org/10.1002/eqe.827
  8. Jangid, R.S. (2010), "Stochastic response of building frames isolated by lead-rubber bearings", Struct. Contr. Health, 17(1), 1-22. https://doi.org/10.1002/stc.266
  9. Jian, F., Xiaohong, L. and Yanping, Z. (2015), "Optimum design of lead-rubber bearing system with uncertainty parameters", Struct. Eng. Mech., 56(6), 959-982. https://doi.org/10.12989/sem.2015.56.6.959
  10. Kalpakidis, I.V. and Constantinou, M.C. (2009a), "Effects of heating on the behavior of lead-rubber bearing. I: Theory", J. Struct. Eng., 135(12), 1440-1449. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000072
  11. Kalpakidis, I.V. and Constantinou, M.C. (2009b), "Effects of heating on the behavior of lead-rubber bearing. II: Verification of theory", J. Struct. Eng., 135(12), 1450-1461. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000071
  12. Kalpakidis, I.V., Constantinou, M.C. and Whittaker, A.S. (2010), "Modeling strength degradation in lead-rubber bearings under earthquake shaking", Earthq. Eng. Struct. Dyn., 39(13), 1533-1549. https://doi.org/10.1002/eqe.1039
  13. Kikuchi, M. and Aiken, I.D. (1997), "An analytical hysteresis model for elastomeric seismic isolation bearings", Earthq. Eng. Struct. Dyn., 26(2), 215-231. https://doi.org/10.1002/(SICI)1096-9845(199702)26:2<215::AID-EQE640>3.0.CO;2-9
  14. Mavronicola, E. and Komodromos, P. (2014), "On the response of base-isolated buildings using bilinear models for LRBs subjected to pulse-like ground motions: Sharp vs. smooth behavior", Earthq. Struct., 7(6), 1223-1240. https://doi.org/10.12989/eas.2014.7.6.1223
  15. Mokha, A.S., Constantinou, M.C. and Reinhorn, A.M. (1993), "Verification of friction model of Teflon bearings under triaxial load", J. Struct. Eng., 119(1), 240-261. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:1(240)
  16. Mori, A., Moss, P.J., Carr, A.J. and Cooke, N. (1998), "Behavior of lead-rubber bearings", Struct. Eng. Mech., 6(1), 1-15. https://doi.org/10.12989/sem.1998.6.1.001
  17. Open System for Earthquake Engineering Simulation (OpenSees), (2009), Version 2.1.0, Pacific Earthquake Engineering Research Center, .
  18. Ozdemir, G. (2014), "Lead core heating in LRBs subjected to bidirectional ground motion excitations in various soil types", Earthq. Eng. Struct. Dyn., 43(2), 267-285. https://doi.org/10.1002/eqe.2343
  19. Ozdemir, G. (2015), "Formulations for equivalent linearization of LRBs in order to incorporate effect of lead core heating", Earthq. Spectr., 31(1), 317-337. https://doi.org/10.1193/041913EQS107M
  20. Ozdemir, G., Avsar, O. and Bayhan, B. (2011), "Change in response of bridges isolated with LRBs due to lead core heating", Soil Dyn. Earthq. Eng., 31(7), 921-929. https://doi.org/10.1016/j.soildyn.2011.01.012
  21. Ozdemir, G. and Bayhan, B. (2015), "Response of an isolated structure with deteriorating hysteretic isolator model", Res. Eng. Struct. Mater., 1(1), 1-9.
  22. Ozdemir, G. and Dicleli, M. (2012), "Effect of lead core heating on the seismic performance of bridges isolated with LRB in near fault zones", Earthq. Eng. Struct. Dyn., 41(14), 1989-2007. https://doi.org/10.1002/eqe.2170
  23. Robinson, W.H. (1982), "Lead-rubber hysteretic bearings suitable for protecting structures during earthquakes", Earthq. Eng. Struct. Dyn., 10(4), 593-604. https://doi.org/10.1002/eqe.4290100408
  24. Tan, R.Y. and Huang, M.C. (2000), "System identification of a bridge with lead-rubber-bearings", Comput. Struct., 74(3), 267-280. https://doi.org/10.1016/S0045-7949(99)00052-8
  25. Tyler, R.G. and Robinson, W.H. (1984), "High-strain tests on leadrubber bearings for earthquake loadings", Bull. N Z Nat. Soc. Earthq. Eng., 17(2), 90-105.

피인용 문헌

  1. Experimental and numerical study on seismic behavior of a self-centering railway bridge pier vol.21, pp.2, 2018, https://doi.org/10.12989/eas.2021.21.2.173