DOI QR코드

DOI QR Code

디젤/1-부탄올 혼합연료 단일액적의 자발화 현상

Autoignition Phenomena of a Single Diesel/1-Butanol Mixture Droplet

  • 김혜민 (한국교통대학교 (항공기계설계전공))
  • 투고 : 2018.04.17
  • 심사 : 2018.05.29
  • 발행 : 2018.06.30

초록

The goal of this study is to experimentally observe the autoignition phenomena of a diesel/1-butanol mixture droplet in ambient pressure and $700^{\circ}C$ condition. A volume ratio of 1-butanol in the fuel was set to 25, 50 and 75%. A single droplet was installed at the tip of fine thermocouple, and the electric furnace dropped down to make elevated temperature condition. Droplet behavior during the experiment could be divided into 3 stages including droplet heating, puffing and autoignition/combustion. Puffing process intensively observed for the case of 1-butanol volume ratio of 25 and 50%, but did not occur at 75%. Increase of 1-butanol volume ratio hindered rise of the droplet temperature and delayed ignition. In addition, puffing process also affected on autoignition, so the ignition delay of 1-butanol volume ratio of 50% was became longer than that of 75% case.

키워드

참고문헌

  1. Park, J., Park and J. Lee, "Estimating On-road NOx Emissions of Euro 6 Light-duty Diesel Vehicles", ILASS-KOREA, Vol 21, No 4, 2016, pp. 207-213. https://doi.org/10.15435/JILASSKR.2016.21.4.207
  2. S. J. M. Algayyim, A. P. Wandel, T. Yusaf and I. Hamawand, "Production and application of ABE as a biofuel", Renewable and Sustainable Energy Reviews, Vol. 82, 2018, pp. 1195-1214. https://doi.org/10.1016/j.rser.2017.09.082
  3. Y. C. Lim, H. K. Suh, "Effect of High Temperature and Pressure Conditions on the Combustion Characteristics of n-butanol and n-heptane Fuel", ILASS-KOREA, Vol 21, No 1, 2016, pp. 29-36. https://doi.org/10.15435/JILASSKR.2016.21.1.29
  4. Y. Zhang, R. Huang, Y. Huang, S. Huang, Y. Ma, S. Xu and P. Zhou, "Effect of ambient temperature on the puffing characteristics of single butanol-hexadecane droplet", Energy, Vol. 145, 2018, pp. 430-441. https://doi.org/10.1016/j.energy.2017.12.158
  5. T. Gao, K. Xie, S. Yu, X. Han, M. Wang and M. Zheng, "Characterization of N-butanol high pressure injection from modern common rail injection system", ASME 2015 Internal Combustion Engine Division Fall Technical Conference, 2015.
  6. M. Gülüm and A. Bilgin, "A comprehensive study on measurement and prediction of viscosity of biodieseldiesel- alcohol ternary blends", Energy, Vol. 148, 2018, pp. 341-361. https://doi.org/10.1016/j.energy.2018.01.123
  7. R. Schoo, A. Hoxie and J. Braden, "Combustion characteristics of butanol-soybean oil blended droplets", ASME 2014 8th International Conference on Energy Sustainability, 2014.
  8. I. Javed, S. W. Baek and K. Waheed, "Autoignition and combustion characteristics of kerosene droplets with dilute concentrations of aluminum nano-particles at elevated temperatures", Combustion and Flame, Vol. 162, No. 3, 2015, pp. 774-787. https://doi.org/10.1016/j.combustflame.2014.08.018
  9. O. Moriue, C. Eigenbrod, H.J. Rath, J. Sato, K. Okai, M. Tsue and M. Kono, "Effects of dilution by aromatic hydrocarbons on staged ignition behavior of n-decane droplets", Proceedings of the Combustion Institute, Vol. 28, No. 1, 2000, pp. 969-975. https://doi.org/10.1016/S0082-0784(00)80303-3
  10. S. Hou, F. M. Rizal, T. Lin, T. Yang and H. Wan, "Microexplosion and ignition of droplets of fuel oil/ bio-oil (derived from lauan wood) blends", Fuel, Vol. 113, 2013, pp. 31-42. https://doi.org/10.1016/j.fuel.2013.05.066