References
- B. Dehlink, H. D. Wohlmuth, H. P. Forstner, H. Knapp, S. Trotta, and K. Aufinger, et al., "A highly linear SiGe double-balanced mixer for 77 GHz automotive radar applications," in IEEE Radio Frequency Integrated Circuits (RFIC) Symposium, San Francisco, CA, 2006, p. 4.
- I. Kallfass, G. Eren, R. Weber, S. Wagner, D. Schwantuschke, and R. Quay, et al., "High linearity active GaNHEMT down-converter MMIC for E-band radar applications," in 2014 9th European Microwave Integrated Circuit Conference, Rome, Oct. 2014, pp. 128-131.
- J. Hasch, E. Topak, R. Schnabel, T. Zwick, R. Weigel, and C. Waldschmidt, "Millimeter-wave technology for automotive radar sensors in the 77 GHz frequency band," in 2014 9th European Microwave Integrated Circuit Conference, Rome, Mar. 2012, pp. 128-131.
- U. Pfeiffer, D. Goren, "A 23-dBm 60-GHz distributed active transformer in a silicon process technology," IEEE Transactions on Microwave Theory and Techniques, vol. 55, no. 5, pp. 857-865, May 2007. https://doi.org/10.1109/TMTT.2007.895654
- D. Zhao, S. Kulkarni, and P. Reynaert, "A 60-GHz outphasing transmitter in 40-nm CMOS," IEEE Journal of Solid-State Circuits, vol. 47, no. 12, pp. 3172-3183, Dec. 2012. https://doi.org/10.1109/JSSC.2012.2216692
- Y. Zhang, D. Zhao, and P. Reynaert, "A flip-chip packaging design with waveguide output on single-layer alumina board for E-band applications," IEEE Transactions on Microwave Theory and Techniques, vol. 64, no. 4, pp. 1255-1264, Mar. 2016. https://doi.org/10.1109/TMTT.2016.2536602
- A. Sutono, N. G. Cafaro, J. Laskar, and M. M. Tentzeris, "Experimental modeling, repeatability investigation and optimization of microwave bond wire interconnects," IEEE Transactions on Advanced Packaging, vol. 24, no. 4, pp. 595-603, Nov. 2001. https://doi.org/10.1109/6040.982850
- F. Alimenti, P. Mezzanotte, L. Roelli, and R. Sorrentino, "An equivalent circuit for the double bonding wire interconnection," in 1999 IEEE MTT-S International Microwave Symposium Digest(Cat. No.99CH36282), Anaheim, CA, USA, Aug. 1999, vol. 2, pp. 633-636.
- B. LaMeres, S. P. Khatri, "Broadband impedance matching for inductive interconnect in VLSI packages," in 2005 International Conference on Computer Design, Oct. 2005, pp. 683-688.
- B. B. Adela, P. van Zeijl, and A. B. Smolders, "Bondwire impedance compensation using a series transmission line section," in 2016 10th European Conference on Antennas and Propagation(EuCAP), Davos, Apr. 2016, pp. 1-4.
- S. K. Yun, H. Y. Lee, "Parasitic impedance analysis of double bonding wires for high-frequency integrated circuit packaging," IEEE Microwave and Guided Wave Letters, vol. 5, no. 9, pp. 296-298, Sep. 1995. https://doi.org/10.1109/75.410403
- 김민석, 강현욱, 김기목, 최두헌, 양영구, "E-평면 프로브를 이용한 E-대역 마이크로스트립-도파관 변환기설계," 한국전자파학회종합학술대회논문집, 2016년12월.