Structural Engineering and Mechanics

  • 제66권6호
  • /
  • Pages.737-748
  • /
  • 2018
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Buckling analysis of tapered BDFGM nano-beam under variable axial compression resting on elastic medium

  • Heydari, Abbas (Young Researchers and Elite Club, Ardabil Branch, Islamic Azad University) ;
  • Shariati, Mahdi (Faculty of Civil Engineering, University of Tabriz)
  • 투고 : 2017.12.19
  • 심사 : 2018.04.04
  • 발행 : 2018.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

The current study presents a new technique in the framework of the nonlocal elasticity theory for a comprehensive buckling analysis of Euler-Bernoulli nano-beams made up of bidirectional functionally graded material (BDFGM). The mechanical properties are considered by exponential and arbitrary variations for axial and transverse directions, respectively. The various circumstances including tapering, resting on two-parameter elastic foundation, step-wise or continuous variations of axial loading, various shapes of sections with various distribution laws of mechanical properties and various boundary conditions like the multi-span beams are taken into account. As far as we know, for the first time in the current work, the buckling analyses of BDFGM nano-beams are carried out under mentioned circumstances. The critical buckling loads and mode shapes are calculated by using energy method and a new technique based on calculus of variations and collocation method. Fast convergence and excellent agreement with the known data in literature, wherever possible, presents the efficiency of proposed technique. The effects of boundary conditions, material and taper constants, foundation moduli, variable axial compression and small-scale of nano-beam on the buckling loads and mode shapes are investigated. Moreover the analytical solutions, for the simpler cases are provided in appendices.

키워드

참고문헌

  1. Akgoz, B. and Civalek, O. (2013), "Buckling analysis of functionally graded microbeams based on the strain gradient theory", Acta Mech., 224(9), 2185-2201. https://doi.org/10.1007/s00707-013-0883-5
  2. Andalib, Z., Ali Kafi, M., Kheyroddin, A. and Bazzaz, M. (2014), "Experimental investigation of the ductility and performance of steel rings constructed from plates", J. Constr. Steel Res., 103, 77-88. https://doi.org/10.1016/j.jcsr.2014.07.016
  3. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2011), "Behavior of through beam connections composed of CFSST columns and steel beams by finite element studying", Adv. Mater. Res., 168, 2329-2333.
  4. Bazzaz, M., Andalib, Z., Ali Kafi, M. and Kheyroddin, A. (2015), "Evaluating the performance of OBS-C-O in steel frames under monotonic load", J. Earthq. Struct., 8(3), 697-710.
  5. Bazzaz, M., Andalib, Z., Ali Kafi, M. and Kheyroddin, A. (2015), "Numerical comparison of the seismic performance of steel rings in off-centre bracing system and diagonal bracing system", J. Steel Compos. Struct., 19(4), 917-937. https://doi.org/10.12989/scs.2015.19.4.917
  6. Bazzaz, M., Kafi, M.A., Kheyroddin, A., Andalib, Z. and Esmaeili, H. (2014), "Evaluating the seismic performance of off-centre bracing system with circular element in optimum place", Int. J. Steel Struct., 14(2), 293-304. https://doi.org/10.1007/s13296-014-2009-x
  7. Bazzaz, M., Kheyroddin, A., Ali Kafi, M. and Andalib, Z. (2012), "Evaluation of the seismic performance of off-centre bracing system with ductile element in steel frames", J. Steel Compos. Struct., 12(5), 445-464. https://doi.org/10.12989/scs.2012.12.5.445
  8. Bazzaz, M., Kheyroddin, A., Kafi, M.A. and Andalib, Z. (2011), "Evaluating the performance of steel ring in special bracing frame", Proceedings of the 6th International Conference of Seismology and Earthquake Engineering, Tehran, Iran.
  9. Eroglu, U. (2016), "Large deflection analysis of planar curved beams made of functionally graded materials using variational iterational method", Compos. Struct., 136, 204-216. https://doi.org/10.1016/j.compstruct.2015.10.017
  10. Ghannadpour, S.A.M., Mohammadi, B. and Fazilati, J. (2013), "Bending, buckling and vibration problems of nonlocal Euler beams using Ritz method", Compos. Struct., 96, 584-589. https://doi.org/10.1016/j.compstruct.2012.08.024
  11. Heydari, A. (2011), "Buckling of functionally graded beams with rectangular and annular sections subjected to axial compression", Int. J. Adv. Des. Manufact. Technol., 5(1), 25-31.
  12. Heydari, A. (2013), "Analytical solutions for buckling of functionally graded circular plates under uniform radial compression using bessel function", Int. J. Adv. Des. Manufact. Technol., 6(4), 41-47.
  13. Heydari, A. (2015), "Spreading of plastic zones in functionally graded spherical tanks subjected to internal pressure and temperature gradient combinations", Iran. J. Mech. Eng. Trans. ISME, 16(2), 5-25.
  14. Heydari, A. (2017), "A new scheme for buckling analysis of bidirectional functionally graded Euler beam having arbitrary thickness variation rested on Hetenyi elastic foundation", Modares Mech. Eng., 17(1), 47-55.
  15. Heydari, A., Jalali, A. and Nemati, A. (2017), "Buckling analysis of circular functionally graded plate under uniform radial compression including shear deformation with linear and quadratic thickness variation on the Pasternak elastic foundation", Appl. Math. Model., 41(Supplement C), 494-507. https://doi.org/10.1016/j.apm.2016.09.012
  16. Heydari, A. and Kazemi, M.T. (2009), "Elasto-plastic analysis of thick-walled FG reservoirs subjected to internal pressure", Int. J. Adv. Des. Manufact. Technol., 3(1), 11-18.
  17. Heydari, A. and Kazemi, M.T. (2015), "Thermo-elasto-plastic analysis of functionally graded spherical reservoirs subjected to temperature gradient", Proceedings of the 10th International Congress on Civil Engineering, University of Tabriz, Iran.
  18. Huang, Y., Zhang, M. and Rong, H. (2016), "Buckling analysis of axially functionally graded and non-uniform beams based on Timoshenko theory", Acta Mech. Sol. Sin., 29(2), 200-207. https://doi.org/10.1016/S0894-9166(16)30108-2
  19. Jalali, A., Daie, M., Nazhadan, S.V.M., Kazemi-Arbat, P. and Shariati, M. (2012), "Seismic performance of structures with pre-bent strips as a damper", Int. J. Phys. Sci., 7(26), 4061-4072.
  20. Khorami, M., Khorami, M., Motahar, H., Alvansazyazdi, M., Shariati, M., Jalali, A. and Tahir, M. (2017), "Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis". https://doi.org/10.12989/SEM.2017.63.2.259
  21. Khorramian, K., Maleki, S., Shariati, M., Jalali, A. and Tahir, M. (2017), "Numerical analysis of tilted angle shear connectors in steel-concrete composite systems", Steel Compos. Struct., 23(1), 67-85. https://doi.org/10.12989/scs.2017.23.1.067
  22. Khorramian, K., Maleki, S., Shariati, M. and Ramli Sulong, N.H. (2015), "Behavior of tilted angle shear connectors", PLoS ONE, 10(12), e0144288. https://doi.org/10.1371/journal.pone.0144288
  23. Lal, R. and Ahlawat, N. (2017), "Buckling and vibrations of two-directional FGM Mindlin circular plates under hydrostatic peripheral loading", Mech. Adv. Mater. Struct., 1-16.
  24. Li, C., Zhang, Y., Tu, W., Jun, C., Liang, H. and Yu, H. (2017), "Soft measurement of wood defects based on LDA feature fusion and compressed sensor images", J. Forestr. Res., 28(6), 1285-1292. https://doi.org/10.1007/s11676-017-0395-6
  25. Li, L., Li, X. and Hu, Y. (2016), "Free vibration analysis of nonlocal strain gradient beams made of functionally graded material", Int. J. Eng. Sci., 102, 77-92. https://doi.org/10.1016/j.ijengsci.2016.02.010
  26. Mansouri, I., Shariati, M., Safa, M., Ibrahim, Z., Tahir, M. and Petkovic, D. (2017), "Analysis of influential factors for predicting the shear strength of a V-shaped angle shear connector in composite beams using an adaptive neuro-fuzzy technique", J. Intell. Manufact., 1-11.
  27. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2013), "Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams", Struct. Eng. Mech., 46(6), 853-868. https://doi.org/10.12989/sem.2013.46.6.853
  28. Mohammadhassani, M., Nezamabadi-pour, H., Suhatril, M. and Shariati, M. (2014), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Syst., 14(5), 785-809. https://doi.org/10.12989/sss.2014.14.5.785
  29. Moradi, M. and Arwade, S.R. (2014), "Improving buckling response of the square steel tube by using steel foam", Struct. Eng. Mech., 51(6), 1017-1036. https://doi.org/10.12989/sem.2014.51.6.1017
  30. Nejad, M.Z. and Hadi, A. (2016), "Eringen's non-local elasticity theory for bending analysis of bi-directional functionally graded Euler-Bernoulli nano-beams", Int. J. Eng. Sci., 106(Supplement C), 1-9. https://doi.org/10.1016/j.ijengsci.2016.05.005
  31. Nejad, M.Z. and Hadi, A. (2016), "Non-local analysis of free vibration of bi-directional functionally graded Euler-Bernoulli nano-beams", Int. J. Eng. Sci., 105(Supplement C), 1-11. https://doi.org/10.1016/j.ijengsci.2016.04.011
  32. Nejad, M.Z., Hadi, A. and Rastgoo, A. (2016), "Buckling analysis of arbitrary two-directional functionally graded Euler-Bernoulli nano-beams based on nonlocal elasticity theory", Int. J. Eng. Sci., 103, 1-10. https://doi.org/10.1016/j.ijengsci.2016.03.001
  33. Nguyen, D.K. and Gan, B.S. (2014), "Large deflections of tapered functionally graded beams subjected to end forces", Appl. Math. Modell., 38(11), 3054-3066. https://doi.org/10.1016/j.apm.2013.11.032
  34. Nguyen, T.T., Kim, N.I. and Lee, J. (2016), "Analysis of thin-walled open-section beams with functionally graded materials", Compos. Struct., 138, 75-83. https://doi.org/10.1016/j.compstruct.2015.11.052
  35. Rajasekaran, S. (2013), "Buckling and vibration of axially functionally graded nonuniform beams using differential transformation based dynamic stiffness approach", Meccan., 48(5), 1053-1070. https://doi.org/10.1007/s11012-012-9651-1
  36. Ranganathan, S.I., Abed, F.H. and Aldadah, M.G. (2016), "Buckling of slender columns with functionally graded microstructures", Mech. Adv. Mater. Struct., 23(11), 1360-1367. https://doi.org/10.1080/15376494.2015.1086452
  37. Rezaiee-Pajand, M., Shahabian, F. and Bambaeechee, M. (2015), "Buckling analysis of semi-rigid gabled frames", Struct. Eng. Mech., 55(3), 605-638. https://doi.org/10.12989/sem.2015.55.3.605
  38. Roshan, L. and Neha, A. (2015), "Buckling and vibrations of two-directional functionally graded circular plates subjected to hydrostatic in-plane force", J. Vibr. Contr., 23(13), 2111-2127.
  39. Sachdeva, C. and Padhee, S.S. (2018), "Functionally graded cylinders: Asymptotically exact analytical formulations", Appl. Math. Modell., 54, 782-802. https://doi.org/10.1016/j.apm.2017.10.019
  40. Shahabi, S., Sulong, N., Shariati, M. and Shah, S. (2016), "Performance of shear connectors at elevated temperatures-a review", Steel Compos. Struct., 20(1), 185-203. https://doi.org/10.12989/scs.2016.20.1.185
  41. Shariati, M. (2008), Assessment Building Using None-destructive Test Techniques (Ultra Sonic Pulse Velocity and Schmidt Rebound Hammer), Universiti Putra Malaysia, Malaysia.
  42. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Shariati, A. (2011), "Experimental and numerical investigations of channel shear connectors in high strength concrete", Proceedings of the 2011 World Congress on Advances in Structural Engineering and Mechanics, Seoul, South Korea.
  43. Shariati, M., Tahir, M.M. Wee, T.C., Shah, S.N.R., Jalali, A., Abdullahi, M.A.M. and Khorami, M. (2018), "Experimental investigations on monotonic and cyclic behavior of steel pallet rack connections", Eng. Fail. Analy., 85, 149-166. https://doi.org/10.1016/j.engfailanal.2017.08.014
  44. Shaterzadeh, A. and Foroutan, K. (2016), "Post-buckling of cylindrical sheels with spiral stiffeners under elastic foundation", Struct. Eng. Mech., 60(4), 615-631. https://doi.org/10.12989/sem.2016.60.4.615
  45. She, G.L., Yuan, F.G. and Ren, Y.R. (2017), "Thermal buckling and post-buckling analysis of functionally graded beams based on a general higher-order shear deformation theory", Appl. Math. Modell., 47, 340-357. https://doi.org/10.1016/j.apm.2017.03.014
  46. Shojaeefard, M.H., Saeidi Googarchin, H., Ghadiri, M. and Mahinzare, M. (2017), "Micro temperature-dependent FG porous plate: Free vibration and thermal buckling analysis using modified couple stress theory with CPT and FSDT", Appl. Math. Modell., 50, 633-655. https://doi.org/10.1016/j.apm.2017.06.022
  47. Shvartsman, B. and Majak, J. (2016), "Numerical method for stability analysis of functionally graded beams on elastic foundation", Appl. Math. Modell. 40(5-6), 3713-3719. https://doi.org/10.1016/j.apm.2015.09.060
  48. Simsek, M. (2016), "Buckling of Timoshenko beams composed of two-dimensional functionally graded material (2D-FGM) having different boundary conditions", Compos. Struct., 149, 304-314. https://doi.org/10.1016/j.compstruct.2016.04.034
  49. Sun, D.L., Li, X.F. and Wang, C.Y. (2015), "Buckling of standing tapered Timoshenko columns with varying flexural rigidity under combined loadings", Int. J. Struct. Stab. Dyn., 16(6), 1550017.
  50. Suresh, S.M.A. (1998), Fundamentals of Functionally Graded Materials, Maney, London, U.K.
  51. Taghizadeh, M., Ovesy, H.R. and Ghannadpour, S.A.M. (2015), "Beam buckling analysis by nonlocal integral elasticity finite element method", Int. J. Struct. Stab. Dyn., 16(6), 1550015.
  52. Tahmasbi, F., Maleki, S., Shariati, M., Sulong, N.R. and Tahir, M. (2016), "Shear capacity of C-shaped and L-shaped angle shear connectors", PloS One, 11(8), e0156989. https://doi.org/10.1371/journal.pone.0156989
  53. Toghroli, A., Darvishmoghaddam, E., Zandi, Y., Parvan, M., Safa, M., Abdullahi, M.M., Heydari, A., Wakil, K., Gebreel, S.A.M. and Khorami, M. (2018), "Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method", Comput. Concrete, 21(5), 525-530. https://doi.org/10.12989/CAC.2018.21.5.525
  54. Togun, N. and Bagdatli, M.S. (2016), "Nonlinear vibration of a nanobeam on a Pasternak elastic foundation based on non-local Euler-Bernoulli beam theory", Math. Comput. Appl., 21(1).
  55. Tossapanon, P. and Wattanasakulpong, N. (2016), "Stability and free vibration of functionally graded sandwich beams resting on two-parameter elastic foundation", Compos. Struct., 142, 215-225. https://doi.org/10.1016/j.compstruct.2016.01.085
  56. Ventsel, E. and Krauthammer, T. (2001), Thin Plates and Shells: Theory: Analysis, and Applications, Marcel Dekker, New York, U.S.A.
  57. Wang, W. and R. Gu (2014), "Buckling analysis of structures under combined loading with acceleration forces", Struct. Eng. Mech., 52(5), 1051-1067. https://doi.org/10.12989/sem.2014.52.5.1051
  58. Yang, H. and Yu, L. (2017), "Feature extraction of wood-hold defects using wavelet-based ultrasonic testing", J. Forestr. Res., 28(2), 395-402. https://doi.org/10.1007/s11676-016-0297-z

피인용 문헌

  1. On nonlinear bending behavior of FG porous curved nanotubes vol.135, pp.None, 2018, https://doi.org/10.1016/j.ijengsci.2018.11.005
  2. A novel meshless particle method for nonlocal analysis of two-directional functionally graded nanobeams vol.41, pp.7, 2018, https://doi.org/10.1007/s40430-019-1799-3
  3. Tapered beam-column analysis by analytical solution vol.172, pp.11, 2018, https://doi.org/10.1680/jstbu.18.00062
  4. Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS) vol.34, pp.1, 2018, https://doi.org/10.12989/scs.2020.34.1.155
  5. Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines vol.34, pp.3, 2018, https://doi.org/10.12989/scs.2020.34.3.377
  6. The effect of RBS connection on energy absorption in tall buildings with braced tube frame system vol.34, pp.3, 2018, https://doi.org/10.12989/scs.2020.34.3.393
  7. Computational estimation of the earthquake response for fibre reinforced concrete rectangular columns vol.34, pp.5, 2018, https://doi.org/10.12989/scs.2020.34.5.743
  8. Elevated temperature resistance of concrete columns with axial loading vol.9, pp.4, 2018, https://doi.org/10.12989/acc.2020.9.4.355
  9. Computational analysis of three dimensional steel frame structures through different stiffening members vol.35, pp.2, 2018, https://doi.org/10.12989/scs.2020.35.2.187
  10. Influence of porosity and cement grade on concrete mechanical properties vol.10, pp.5, 2018, https://doi.org/10.12989/acc.2020.10.5.393
  11. Influence of micromechanical models on the bending response of bidirectional FG beams under linear, uniform, exponential and sinusoidal distributed loading vol.39, pp.2, 2021, https://doi.org/10.12989/scs.2021.39.2.215
  12. Assessment of microstructure and surface effects on vibrational characteristics of public transportation vol.11, pp.1, 2021, https://doi.org/10.12989/anr.2021.11.1.101
  13. Smart estimation of automatic approach in enhancing the road safety under AASHTO Standard specification and STM vol.79, pp.3, 2021, https://doi.org/10.12989/sem.2021.79.3.389
  14. Application of multi-hybrid metaheuristic algorithm on prediction of split-tensile strength of shear connectors vol.28, pp.2, 2018, https://doi.org/10.12989/sss.2021.28.2.167
  15. Analyzing shear strength of steel-concrete composite beam with angle connectors at elevated temperature using finite element method vol.40, pp.6, 2018, https://doi.org/10.12989/scs.2021.40.6.853