Structural Engineering and Mechanics

  • 제66권6호
  • /
  • Pages.713-727
  • /
  • 2018
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Energy absorption of the ring stiffened tubes and the application in blast wall design

  • Liao, JinJing (Atkins Australasia Pty Ltd.) ;
  • Ma, Guowei (School of Civil and Transportation Engineering, Hebei University of Technology)
  • 투고 : 2018.02.05
  • 심사 : 2018.03.21
  • 발행 : 2018.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

Thin-walled mental tubes under lateral crushing are desirable and reliable energy absorbers against impact or blast loads. However, the early formations of plastic hinges in the thin cylindrical wall limit the energy absorption performance. This study investigates the energy absorption performance of a simple, light and efficient energy absorber called the ring stiffened tube. Due to the increase of section modulus of tube wall and the restraining effect of the T-stiffener flange, key energy absorption parameters (peak crushing force, energy absorption and specific energy absorption) have been significantly improved against the empty tube. Its potential application in the offshore blast wall design has also been investigated. It is proposed to replace the blast wall endplates at the supports with the energy absorption devices that are made up of the ring stiffened tubes and springs. An analytical model based on beam vibration theory and virtual work theory, in which the boundary conditions at each support are simplified as a translational spring and a rotational spring, has been developed to evaluate the blast mitigation effect of the proposed design scheme. Finite element method has been applied to validate the analytical model. Comparisons of key design criterions such as panel deflection and energy absorption against the traditional design demonstrate the effectiveness of the proposed design in blast alleviation.

키워드

참고문헌

  1. Al-Rifaie, H. and Sumelka, W. (2017), "Numerical analysis of reaction forces in blast resistant gates", Struct. Eng. Mech., 63(3), 347-359. https://doi.org/10.12989/SEM.2017.63.3.347
  2. Biggs, J.M. (1964), Introduction to Structural Dynamics, McGraw-Hill, London, U.K.
  3. Chen, W. and Hao, H. (2013), "Numerical study of blast-resistant sandwich panels with rotational friction dampers", Int. J. Struct. Stab. Dyn., 13(5) 1350014. https://doi.org/10.1142/S0219455413500144
  4. Chen, W.X., Gao, Z.K. and Ye, J.H. (2011), "Dynamic responses and failure modes of reinforced concrete beam with flexible supports under blast loading", ACTA ARMAMENTARII, 23(10), 1271-1277.
  5. DNV-RP-C208 (2013), Determination of Structural Capacity by Non-Linear FE analysis Methods, Det Norske Veritas (DNV), Hovik, Norway.
  6. Eyvazian, A., Habibi, M.K., Hamouda, A.G. and Hedayati, R. (2014), "Axial crushing behaviour and energy absorption efficiency of corrugated tubes", Mater. Des., 54, 1028-1038. https://doi.org/10.1016/j.matdes.2013.09.031
  7. FABIG TN6 (2001), Technical Note 6: Design Guide for Steels at Elevated Temperatures and High Strain Rates, Fire and Blast Information Group (FABIG), Berkshire, U.K.
  8. Fan, Z., Shen, J., Lu, G. and Ruan, D. (2013), "Dynamic lateral crushing of empty and sandwich tubes", Int. J. Imp. Eng., 53, 3-16. https://doi.org/10.1016/j.ijimpeng.2012.09.006
  9. Fire and Explosion Guidance (2007), Oil and Gas UK, London, U.K.
  10. Jones, N. (1989), Structural Impact, Cambridge University Press, Cambridge, U.K.
  11. Langdon, G.S. and Schleyer, G.K. (2005), "Inelastic deformation and failure of profiled stainless steel blast wall panels part II: Analytical modelling considerations", Int. J. Imp. Eng., 31(4), 371-399. https://doi.org/10.1016/j.ijimpeng.2003.12.011
  12. Langdon, G.S. and Schleyer, G.K. (2004), "Unusual strain rate sensitive behaviour of AISI 316L austenitic stainless steel", J. Strain. Analy. Eng., 39(1), 71-86. https://doi.org/10.1177/030932470403900106
  13. Louca, L.A., Boh, J.W. and Choo, Y.S. (2004), "Design and analysis of stainless steel profiled blast barriers", J. Constr. Steel Res., 60(12), 1699-1723. https://doi.org/10.1016/j.jcsr.2004.04.005
  14. Lu, G. and Yu, T. (2003), Energy Absorption of Structures and Materials, Woodhead Publishing Limited, Cambridge, U.K.
  15. Meng, F., Zhang, B., Zhao, Z., Xu, Y., Fan, H. and Jin, F. (2016), "A novel all-composite blast-resistant door structure with hierarchical stiffeners", Compos. Struct., 148, 113-126. https://doi.org/10.1016/j.compstruct.2016.03.066
  16. Menkes, S. and Opat, H. (1973), "Broken beams-tearing and shear failures in explosive loaded clamped beams", Exp. Mech., 3, 480-486.
  17. Nonaka, T. (1967), "Some interaction effects in a problem of plastic beam dynamics", J. Appl. Mech., 34(3), 623-643. https://doi.org/10.1115/1.3607753
  18. Nouri, M.D., Hatami, H. and Jahromi, A.G. (2015), "Experimental and numerical investigation of expanded metal tube absorber under axial impact loading", Struct. Eng. Mech., 51(6), 1245-1266.
  19. Rasmussen, K.J.R. (2003), "Full-range stress-strain curves for stainless steel alloys", J. Constr. Steel Res., 59(1), 47-61. https://doi.org/10.1016/S0143-974X(02)00018-4
  20. SIMULIA (2015), Abaqus Analysis User's Guild, v.6.14.
  21. Song, C.M., Wang, M.Y. and Liu, B. (2014), "Effects of boundary restrains on dynamic response of a beam under blast loading (I)-theoretical study and analysis", J. Vibr. Shock, 33(5), 82-86.
  22. Wang, H., Yang, J., Liu, H., Sun, Y. and Yu, T.X. (2015), "Internally nested circular tube system subjected to lateral impact loading", Thin Wall Struct., 91, 72-81. https://doi.org/10.1016/j.tws.2015.02.014
  23. Xia, Z., Wang, X., Fan, H., Li, Y. and Jin, F. (2016), "Blast resistance of metallic tube-core sandwich panels", Int. J. Imp. Eng., 97, 10-28. https://doi.org/10.1016/j.ijimpeng.2016.06.001
  24. Xiang, X.M., Lu, G., Ma, G.W., Li, X.Y. and Shu, D.W. (2016), "Blast response of sandwich beams with thin-walled tubes as core", Eng. Struct., 127, 40-48. https://doi.org/10.1016/j.engstruct.2016.08.034
  25. Zhang, B., Jin, F., Zhao, Z., Zhou, Z., Xu, Y., Chen, H. and Fan, H. (2018), "Hierarchical anisogrid stiffened composite panel subjected to blast loading: Equivalent theory", Compos. Struct., 187, 259-268. https://doi.org/10.1016/j.compstruct.2017.12.059
  26. Zhang, B., Nian, X., Jin, F., Xia, Z. and Fan, H. (2016), "Failure analyses of flexible ultra-high molecular weight polyethylene (UHMWPE) fiber reinforced anti-blast wall under explosion", Compos. Struct., 184, 759-774.