DOI QR코드

DOI QR Code

Reliability analysis of circular tunnel with consideration of the strength limit state

  • Ghasemi, Seyed Hooman (Department of Civil Engineering, Qazvin Branch, Islamic Azad University) ;
  • Nowak, Andrzej S. (Department of Civil Engineering, Auburn University)
  • 투고 : 2017.05.31
  • 심사 : 2018.03.23
  • 발행 : 2018.06.30

초록

Probability-based design codes have been developed to sufficiently confirm the safety level of structures. One of the most acceptable probability-based approaches is Load Resistance Factor Design (LRFD), which measures the safety level of the structures in terms of the reliability index. The main contribution of this paper is to calibrate the load and resistance factors of the design code for tunnels. The load and resistance factors are calculated using the available statistical models and probability-based procedures. The major steps include selection of representative structures, consideration of the limit state functions, calculation of reliability for the selected structures, selection of the target reliability index and calculation of load factors and resistance factors. The load and resistance models are reviewed. Statistical models of resistance (load carrying capacity) are summarized for strength limit state in bending, shear and compression. The reliability indices are calculated for several segments of a selected circular tunnel designed according to the tunnel manual report (Tunnel Manual). The novelty of this paper is the selection of the target reliability. In doing so, the uniform spectrum of reliability indices is proposed based on the probability paper. The final recommendation is proposed based on the closeness to the target reliability index.

키워드

과제정보

연구 과제 주관 기관 : Iranian Science Foundation

참고문헌

  1. AASHTO, (2014), Bridge Design Specifications, American Association of State Highway and Transportation Officials, Washington, D.C., U.S.A.
  2. ACI 318-14, (2014), Building Code Requirements for Structural Concrete, American Concrete Institute, Farmington Hills, Michigan, U.S.A.
  3. Campana, S., Ruiz, M.F. and Muttoni, A. (2014), "Shear strength of arch-shaped members without transverse reinforcement", ACI Struct. J., 111(3), 573-582.
  4. Celik, A.O., Kilinc, K., Tuncan, M. and Tuncan, A. (2012), "Distributions of compressive strength obtained from various diameter cores", ACI Mater. J, 109(6), 597-606.
  5. Chen, H.P. and Xiao, N. (2015), "Symptom-based reliability analyses and performance assessment of corroded reinforced concrete structures", Struct. Eng. Mech., 53(6), 1183-1200. https://doi.org/10.12989/sem.2015.53.6.1183
  6. Duncan, J. (2000), "Factors of safety and reliability in geotechnical engineering", J. Geotech. Geoenviron. Eng., 126(4), 307-316. https://doi.org/10.1061/(ASCE)1090-0241(2000)126:4(307)
  7. Ellingwood, B. Galambos, T.V., MacGregor, J.G. and Cornell C.A. (1980), Development of a Probability Based Load Criterion for American National Standard A58, National Bureau of Standards, NBS Special Publication 577, Washington, D.C., U.S.A.
  8. Enevoldsen, I. and Sorensen, J.D. (1994), "Reliability-based optimization in structural engineering", Struct. Safe., 15(3), 169-196. https://doi.org/10.1016/0167-4730(94)90039-6
  9. Ghasemi, S.H. (2014), "Target reliability analysis for structures", Ph.D. Dissertation, Auburn University, Auburn, U.S.A.
  10. Ghasemi, S.H. and Nowak, A.S. (2017a), "Reliability index for non-normal distributions of limit state functions", Struct. Eng. Mech., 62(3), 365-372. https://doi.org/10.12989/sem.2017.62.3.365
  11. Ghasemi, S.H. and Nowak, A.S. (2017b), "Target reliability for bridges with consideration of ultimate limit state", Eng. Struct., 152, 226-237. https://doi.org/10.1016/j.engstruct.2017.09.012
  12. Ghasemi, S.H. and Nowak, A.S. (2016), "Mean maximum values of non-normal distributions for different time period", J. Reliability Safe., 10(2), 99-109. https://doi.org/10.1504/IJRS.2016.078381
  13. Hoshitani, M. and Ishii, K. (1986), Reliability Design Method for Structures, Kajima Publication (in Japanese).
  14. Langford, J.C. and Diederichs, M.S. (2013), "Reliability based approach to tunnel lining design using a modified point estimate method", J. Rock Mech. Min. Sci., 60, 263-276
  15. Li, H.Z. and Low, B.K. (2010), "Reliability analysis of circular tunnel under hydrostatic stress field", Comput. Geotech., 37(1-2), 50-58. https://doi.org/10.1016/j.compgeo.2009.07.005
  16. Liu, X., Hu, X., Guan, L. and Sun, W. (2017), "The ultimate bearing capacity of rectangular tunnel lining assembled by composite segments: An experimental investigation", Steel Compos. Struct., 24(4), 481-497. https://doi.org/10.12989/SCS.2017.24.4.481
  17. Losada, M.A. and Benedicto, M.I. (2005), "Target design levels for maritime structure", J. Waterway Port Coastal Ocean Eng., 131(4), 171-180. https://doi.org/10.1061/(ASCE)0733-950X(2005)131:4(171)
  18. Nagao, T., Kadowaki, Y. and Terauchi, K. (2005), "Overall system stability of a breakwater based on reliability design method (First report)-Discussion on the stability against sliding", Proc. Struct. Eng., 51, 389-400.
  19. Nowak, A.S. and Collins K.R. (2013), Reliability of Structures, CRC Press, New York, U.S.A.
  20. Nowak, A.S. and Rakoczy, A.M. (2012), "Statistical resistance models for R/C structural components", ACI SP-284-6, ACI Special Publ., 284, 1-16.
  21. Rackwitz, R. and Joanni, A. (2009), "Risk acceptance and maintenance optimization of aging civil engineering infrastructures", Struct. Safe.,, 31(3), 251-259. https://doi.org/10.1016/j.strusafe.2008.07.001
  22. Suh, K.D., Kim, K.S. and, Kim, D.L. (2010), "Effects of discount rate and various costs on optimal design of caisson breakwater", KSCE J. Civ. Eng., 14(2), 99-109. https://doi.org/10.1007/s12205-010-0099-3
  23. Trbojevic, V.M. (2009), "Another look at risk and structural reliability criteri", Struct. Safe., 31(3), 245-250. https://doi.org/10.1016/j.strusafe.2008.06.019
  24. Hung, C.J., Monsees, J., Munfah, N. and Wisniewski, J. (2009), Technical Manual for Design and Construction of Road Tunnels-Civil Elements, Report no. FHWA-NHI-10-034, US Department of Transportation, Federal Highway Administration, National Highway Institute, New York, U.S.A.
  25. Yanaka, M., Nowak, A.S. and Ghasemi, S.H. (2016), "Reliabilitybased and life-cycle cost-oriented design recommendations for prestressed concrete bridge girders", Struct. Concrete, 17(5), 836-847. https://doi.org/10.1002/suco.201500197
  26. Yang, X.L. and Li, W.T. (2017), "Reliability analysis of shallow tunnel with surface settlement", Geomech. Eng., 12(2), 313-326. https://doi.org/10.12989/gae.2017.12.2.313
  27. Zhang, B., Wang, X., Zhang, J.S. and Meng, F. (2017), "Threedimensional limit analysis of seismic stability of tunnel faces with quasi-static method", Geomech. Eng., 13(2), 301-318. https://doi.org/10.12989/GAE.2017.13.2.301

피인용 문헌

  1. Quantitative assessment on the reinforcing behavior of the CFRP-PCM method on tunnel linings vol.25, pp.2, 2021, https://doi.org/10.12989/gae.2021.25.2.123
  2. Study on Durability and Pore Characteristics of Concrete under Salt Freezing Environment vol.14, pp.23, 2018, https://doi.org/10.3390/ma14237228