The Journal of Society for e-Business Studies (한국전자거래학회지)

Society for e-Business Studies (한국전자거래학회)
권호 표지
DOI QR코드

DOI QR Code

Review of Domestic Research on Smart Manufacturing Technologies

스마트제조 기술 국내연구 고찰

  • Park, Jong-Kyung (Intelligence & Manufacturing Research Center, Kyonggi University) ;
  • Chang, Tai-Woo (Department of Industrial & Management Engineering/Intelligence & Manufacturing Research Center, Kyonggi University)
  • Received : 2018.04.19
  • Accepted : 2018.05.25
  • Published : 2018.05.31
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, countries are pursuing vigorous research, development and commercialization in cooperation with industry, academia and researcher to take the lead in building a smart manufacturing system that is at the center of the fourth industrial revolution. According to a research report [4], the competitiveness of Korea in the area of basic technology, hardware, and software of the smart factory is reported to be less than 70% of the developed countries. In this study, we reviewed the existing research literature and analyzed the current status of smart manufacturing technology and major issues in the manufacturing industry. We tried to provide ideas for collaboration with core technology researchers and companies with business processes. Internet of Things, CPS and robot technologies have been the most active in smart manufacturing area. It can be seen that cooperation between researchers and industries in the early stage is being done through the case of industry application of each core technology.

최근 세계 각국은 4차 산업혁명의 중심에 있는 스마트제조 시스템 구축에 앞장서기 위하여 산학연이 협력하여 활발한 연구, 개발 및 비즈니스화를 추구해 가고 있다. 기존의 연구 보고에 따르면 우리나라는 스마트공장의 기초기술, 하드웨어, 소프트웨어 분야의 경쟁력이 선진국 대비 70% 미만의 수준으로 보고되고 있다. 본 연구에서는 기존 연구문헌 검토 및 분석을 통하여 제조업에서 스마트제조 기술의 활용사례 현황과 연구의 주요 이슈를 파악하여 핵심 기술 연구자들과 비즈니스 프로세스를 가지고 있는 기업과의 협력에 아이디어를 제공하고자 한다. 공장과 제조분야에 적용되거나 고려된 기술로는 사물인터넷이 가장 활발한 연구가 이루어지고 있었으며, CPS, 로봇의 순서로 많은 연구가 이루어지고 있음을 볼 수 있다. 각 요소 기술의 기업 적용사례를 통하여 초기 단계의 연구자와 기업과의 협력이 이루어지고 있음을 볼 수 있다.

Keywords

References

  1. Ahn, G. and Hur, S., "Survey on Cloud Manufacturing: Focusing on the Operational Process," Journal of the Korean Institute of Industrial Engineers, Vol. 43, No. 6, pp. 422-434, 2017. https://doi.org/10.7232/JKIIE.2017.43.6.422
  2. Chang, T. and Yang, H., "Latent semantics analysis of research papers on smart factory", ICIC Express Letters, Vol. 11, No. 4, pp. 899-904, 2017. https://doi.org/10.3144/expresspolymlett.2017.86
  3. Choi et al., "A study of Big-data analysis for relationship between students," Journal of Information and Security, Vol. 16. No. 5, pp. 87-93, 2016.
  4. Choi, Y. and Choi, S., "A Study on the Factors Influencing the Competitiveness of Small and Medium Companies Applied with Smart Factory System," Information Systems Review, Vol. 19, No. 2, pp. 95-113, 2017.
  5. Heo, H. and Song, J., "Artificial Landmark based Pose-Graph SLAM for AGVs in Factory Environments," Journal of Korea Robotics Society, Vol. 10, No. 2, pp. 112-118, 2015. https://doi.org/10.7746/jkros.2015.10.2.112
  6. Hwang et al., "Analysis of IoT Usage in Korean Key Manufacturing Industries," The Journal of Society for e-Business studies, Vol. 21, No. 4, pp. 81-93, 2016. https://doi.org/10.7838/JSEBS.2016.21.4.081
  7. Hwang, D. and Kim, J., "Low-weight Secure Encryption Protocol on RFID for Manufactory Automation," Journal of Information and Security, Vol. 16, No. 7, pp. 173-180, 2016.
  8. International Comparison of R&D Status of the Fourth Industrial Revolution Industry, Hyundai Research Institute VIP Report, No. 17-29, 2017.
  9. Jeon, I. and Kang, S., "CPS-based Smart Factory Technology for Cyber-Physical Factory Interconnection," Information and Communications Magazine, Vol. 33, No. 11, pp. 8-15, 2016.
  10. Jun, C., Kim, B., and Lee, J., "A Big Data Analysis Platform based on the Manufacturing Specialized Library: A Case Study on Implementation of the Platform for Quality Problems," Journal of the Korean Institute of Industrial Engineers, Vol. 43, No. 5, pp. 380-387, 2017. https://doi.org/10.7232/JKIIE.2017.43.5.380
  11. Jung, H., 3R in Industry 4.0, Proceeding on the 2017 Conference of the Korean Reliability Society, pp. 95-95, 2017.
  12. Kang et al., "Development of Multi-Pass Automatic Welding Technology for Thick Plates using Small Robot," Proceeding on the 2017 Conference of the Korean Welding and Joining Society, 2015.
  13. Kang, H. and Noh, S., "Research Trends of Main Smart Manufacturing Technologies," IE Magazine, Vol. 23, No. 1, pp. 24-28, 2016.
  14. Kim et al., "A Study on Manufacturing System Integration with a 3D printer based on the Cloud Network," Journal of the korean Society of Manufacturing Process Engineers, Vol. 14, No. 3, pp. 15-20, 2015. https://doi.org/10.14775/ksmpe.2015.14.3.015
  15. Kim et al., "Strength Analysis of LCD Transfer Robot Planetary Gear," Journal of the korean Society of Manufacturing Process Engineers, No. 10, p. 66, 2017.
  16. Kim, B., "A Internet of Things(IoT) based exploration robot design for remote control and monitoring," Journal of Digital Convergence, Vol. 13, No. 1, pp. 185-190, 2015. https://doi.org/10.14400/JDC.2015.13.1.185
  17. Kim, J. and Jin, S., "A Design for Realtime Monitoring System and Data Analysis Verification TA to Improve the Manufacturing Process Using HW-SW Integrated Framework," KIPS Tr. Software and Data Eng., Vol. 4, No. 9, pp. 357-370, 2015. https://doi.org/10.3745/KTSDE.2015.4.9.357
  18. Kim, J. and Jin, S., "Information Visualization for the Manufacturing Process Optimization Based on Design of Experiment and Data Analysis," KIPS Tr. Software and Data Eng., Vol. 4, No. 9, pp. 393-402, 2015. https://doi.org/10.3745/KTSDE.2015.4.9.393
  19. Kim, J., "A Smart Home Prototype Implementation Using Raspberry Pi," The Journal of the Korea Institute of Electronic Communication Sciences, No. 10, pp. 1139-1144, 2015.
  20. Kim, J., Choi, S., Chi, S., and Yoo, K., "Visualization of Big Data Analysis Results Connecting to Database," Journal of the Korean Society for Big data Service, Vol. 2, No. 1, pp. 1-10, 2015.
  21. Kim, Y., "Innovation of Welding Process by IoT Technology," Proceeding on the 2017 Conference of the Korean Welding and Joining Society, pp. 49-53, 2017.
  22. Lee et al., "Big-data Analytics Solution for Smart Manufacturing," IE Magazine, Vol. 23, No. 4, pp. 28-34, 2016.
  23. Lee, E., "The Fourth Industrial Revolution and Changes in the Industrial Structure," Information and Communications Policy, Vol. 28, No. 15, pp. 1-22, 2016.
  24. Lee, H. and Oh, J., "Design and Implementation of a Small Server Room Environment Monitoring System by Using the Arduino," Journal of the KIECS, Vol. 12, No. 2, pp. 385-390, 2017.
  25. Lee, H., "Embedded System Framework and Its Implementation for Device-to-Device Intelligent Communication of Manufacturing IoT Device considering Smart Factory," Journal of Korean Institute of Intelligent Systems, Vol. 27, No. 5, pp. 459-465, 2017. https://doi.org/10.5391/JKIIS.2017.27.5.459
  26. Lee, W., "Governmental policies of science and ICT in response to the Fourth Industrial Revolution," Proceeding on 2017 Fall conference of the Korean Institute of Surface Engineering, 2017.
  27. Lee, Y., "Development of Smart Garden Control System Using Probabilistic Filter Algorithm Based on SLAM," Journal of the KIECS, Vol. 12, No. 3, pp. 465-470, 2017.
  28. Lim, J., "Global R&D Trend and Challenges in Artificial Intelligence SW," The Journal of Korean Institute of Next Generation Computing, pp. 33-46, 2016.
  29. Noh, S. and Kim, Y., "Optimization Model for the Mixing Ratio of Coatings Based on the Design of Experiments Using Big Data Analysis," KIPS Tr. Comp. and Comm. Sys., Vol. 3, No. 10, pp. 383-392, 2014. https://doi.org/10.3745/KTCCS.2014.3.10.383
  30. Noh, S., "Smart Factory and Cyber-Physical System Techology," Information and Communications Magazine, Vol. 33, No. 11, pp. 3-7, 2016.
  31. Park et al., "Design and Manufacturing of the hand orthosis using 3D printing," Proceeding on 2016 Conference of the Korea Society of Manufacturing Technology Engineers, p. 1, 2016.
  32. Park, J., Lee, A., and Kim, T., "Implementation of High Speed Big Data Processing System using In Memory Data Grid in Semiconductor Process," J. Korea Inst. Intell. Transp. Syst., Vol. 15, No. 5, pp. 125-133, 2016. https://doi.org/10.12815/kits.2016.15.5.125
  33. Ryu, G., "Convergence Research for Implementing NC Postprocessor Based Cloud Computing," Journal of the Korea Convergence Society, Vol. 7, No. 1, pp. 17-23, 2016. https://doi.org/10.15207/JKCS.2016.7.1.017
  34. Shin, D., Human-centered Robotics: A New Concept for Manufacturing Robots, Proceeding on the 2014 Conference of the Korean Society for Precision Engineering, 2014.
  35. Son, J. and Lee, K., "A Study on Factors Affecting Intention to Introduce 3D Printing in Manufacturing Area," Proceeding on 2015 Spring Conference of the Korea Society of Management Information Systems, pp. 63-68, 2015.
  36. Yoon, J. and Park, T., "Trends and prospects of Manufacturing innovation by CPS and IoT Technologies," Information and Communications Magazine, Vol. 33, No. 11, pp. 23-28, 2016.
  37. Yun, H. and Kim, H., "Circuit fabrication development technology by using a 3D printing Jetting Technology," Proceeding of 2016 Fall Conference of the Korean Society of Manufacturing Process Engineers, p. 75, 2016.

Cited by

  1. A Study on Smart Factory Construction Method for Efficient Production Management in Sewing Industry vol.18, pp.1, 2018, https://doi.org/10.6109/jicce.2020.18.1.61
  2. Application of FOM Methodology for 4M Optimization Based on the Data of Manufacturing Process of Mechanical Parts vol.30, pp.6, 2018, https://doi.org/10.7735/ksmte.2021.30.6.456