References
- Lee, H. J., Rifle and Ballistics, Chung Moon Gak, pp. 91-107, 1994.
- Oh, K. K., Kim, J. H., Choi, H. S., "Effect of Nitriding on Fatigue Characteristics of Cr-Mo Alloy Steel," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 39, No. 6, pp. 597-602, 2015.
- Kim, M. W., Kim, K. H., Kang, M. C., Cho, S. H., Ryu, K. T., "Mechanical properties and cutting performance of Cr-Al-N hybrid coated micro-tool for micro high-speed machining of flexible fine die," Current Applied Physics, 12, S14-S18, 2012. https://doi.org/10.1016/j.cap.2012.02.010
- Wang, B., Zhao, X., Li, W., Jianfeng Gu, M. Q., "Effect of nitride-layer microstructure control on wear behavior of AISI H13 hot work die steel," Applied Surface Science 431, pp. 39-43, 2018. https://doi.org/10.1016/j.apsusc.2017.03.185
- Pinedo, C. E., Monteiro, W. A., "Surface hardening by plasma nitriding on high chromium alloy steel," Journal of materials science letters, Vol. 20, No. 2, pp. 147-150, 2001. https://doi.org/10.1023/A:1006723225515
- Golanski, G., Pietryka, I., Slania, J., Mrozinskis, S., Jasak, J., "Microstructure and Mechanical Properties of CRMOV Steel after Long-term Service," Archives of Metallurgy and Materials, Vol. 61, No.1, pp. 51-54, 2015. https://doi.org/10.1515/amm-2016-0014
- Zhao, J., Han, S. Q., Gao, H. B., Wang, L., "Remaining life assessment of a CrMoV steel using the Z-parameter method," International Journal of Pressure Vessels and Piping, Vol. 81, No. 9, pp. 757-760, 2004. https://doi.org/10.1016/j.ijpvp.2004.05.002
- Jeong, H. D., "A study on the Variation of Mechanical Properties Due to Thermal Aging in 2.5Cr-1Mo Boiler Tube Steel," Transactions of the Korean Society of Mechanical Engineers A, Vol. 20, No. 5, pp. 1372-1381, 1996. https://doi.org/10.22634/KSME-A.1996.20.5.1372
- Kim, J. K., Kim, J. S., Lee, J. H., Kwak, J. S., "A Study on the Optimization of the Dimensional Deviation due to the Shortening of the Cycle Time for Rear Cover of Mobile Phone," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 6, pp. 117-124. 2017. https://doi.org/10.14775/ksmpe.2017.16.6.117
- Song, W. J., Lee, E. S., "A Study on the Optimal Conditions of Hole Machining of Microplate by Application of Response Surface Methodology in Wire-Pulse Electrochemical Machining," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 5, pp. 141-149, 2017.
- Kim, K. M., "Optimization of Sheet Metal Forming Process Using Mahalanobis Taguchi System," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 1, pp. 95-102, 2016. https://doi.org/10.14775/ksmpe.2016.15.1.095
- MIL-B-11595E(1988), "Bar, Metal and Blanks, Steel (Under 2 Inches in Diameter) for Barrels Of Small Arms Weapons," Retrieved 26, July., 2004, from http://quicksearch.dla.mil.
Cited by
- 엔지니어링 플라스틱 소재별 보강뿔대 형상에 따른 산업용 안전모의 구조 최적화 vol.18, pp.3, 2018, https://doi.org/10.14775/ksmpe.2019.18.3.041