한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제17권3호
  • /
  • Pages.141-147
  • /
  • 2018
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

위상 및 형상 최적화기법에 의한 샤시부품의 국부동강성 및 경량화 효과

Effect on Drive Point Dynamic Stiffness and Lightweight Chassis Component by using Topology and Topography Optimization

  • 투고 : 2018.03.24
  • 심사 : 2018.05.21
  • 발행 : 2018.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Recently, interest in customers has shifted to the emotional quality of customers as the driving, handling, and collision stability of automobiles have been greatly improved. The NVH performance of a vehicle is quantified and evaluated from the DPDS. To improve the DPDS, we need to optimize the shape without considering the increases in thickness of the parts or additions to the parts. And at the same time, we need to establish design and analysis processes to satisfy the requirements of the DPDS.

키워드

참고문헌

  1. Kim, S. Y., Kim, K. S., "A Study on Radiation Noise of Vehicle Power Seat Recliner using Finite Element Analysis," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 1, pp. 101-107, 2018.
  2. Chung, W. J., Oh, J. S., Park Y. N., Kim, D. C., Park, Y. J., "Optimization of the Suspension Design to Reduce the Ride Vibration of 90kW-Class Tractor Cabin," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 5, pp. 91-98, 2017. https://doi.org/10.14775/ksmpe.2017.16.5.091
  3. Nam, K. S., Choi, J. K., Choi H. Min., Kim, J. K., Yeum, S. H. and Lee, S. S., "Study on the Improvement of Strength of Excavator Attachments Considering the Field Environment," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 1, pp. 122-128, 2016. https://doi.org/10.14775/ksmpe.2016.15.1.122
  4. Kang, J. S., "A Study on Structural Design of Torsion Beam Rear Suspension," Transaction of KSAE, Vol. 13, No. 3, pp. 146-153, 2005.
  5. Kim, K. Y., Kwak, S. H., Han, G. D., Park, J. S., Cho, J. H., Lee, C. H. and Kan,g M. C., "Formability Evaluation of the Vacuum Resin Transfer Molding of a CFRP Composite Automobile Seat Cross Part," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 3, pp. 24-29, 2017.
  6. Kim, K. Y., Choy, L. J., Shin, H. I., Cho, J. H., Lee, C. H. and Kang, M. C., "Characteristics of Mechanical Properties and Micro Structure according to High-Frequency Induction Heating Conditions in Roll Forming Process of a Sill Side Part," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 6, pp. 87-94, 2017. https://doi.org/10.14775/ksmpe.2017.16.6.087
  7. Kim, Y. C., Hong, J. K. and Jang, G. W., "Lightweight Crane Design by Using Topology and Shape Optimization," Transactions of the KSME - A, Vol. 35, No. 7, pp. 821-826, 2011. https://doi.org/10.3795/KSME-A.2011.35.7.821
  8. Kong, Y. S., Abdullah, S., Omar, M. Z., Haris, S. M., "Topological and topographical optimization of automotive spring lower seat," Latin American Journal of Solids and Structures, Vol. 13, No. 7, pp. 1388-1405, 2016. https://doi.org/10.1590/1679-78252082
  9. Kuntjoro, W., Jalil, A. A., & Mahmud, J., "Wing Structure Static Analysis using Superelement", Procedia Engineering, Vol. 41, Pages 1600-1606, 2012. https://doi.org/10.1016/j.proeng.2012.07.356
  10. Choi, W. H., Huang, C. G., Park, G. J. and Kim, T. K., "Basic Study on Performance Comparison of Structural Optimization Software Systems," Transactions of KSME-A, Vol. 38, No. 12, pp. 1403-1413, 2014. https://doi.org/10.3795/KSME-A.2014.38.12.1403
  11. HYPERWORKS, Hypermesh 13.0 Manual, Altair Engineering, Inc., pp. 139-218, 2014.
  12. HYPERWORKS, Optistruct 13.0 User guide, Altair Engineering, Inc., pp. 331-406, 2014.
  13. "Using AMSES Automatic Multi Level Sub Structuring Eigensolver Solution," 2018. http://blog.altair.co.kr(accessed 10, May., 2018)

피인용 문헌

  1. Evaluation of Mechanical Properties with Tool Rotational Speed in Dissimilar Cast Aluminum and High-Strength Steel of Lap Jointed Friction Stir Welding vol.18, pp.7, 2018, https://doi.org/10.14775/ksmpe.2019.18.7.090
  2. 파이프 형상의 이종 주조알루미늄-고장력강의 마찰교반용접에서 확정선별설계법에 의한 인장강도 응용 vol.19, pp.10, 2018, https://doi.org/10.14775/ksmpe.2020.19.10.098
  3. Effect of Process Factors on Tensile Shear Load Using the Definitive Screening Design in Friction Stir Lap Welding of Aluminum-Steel with a Pipe Shape vol.14, pp.19, 2018, https://doi.org/10.3390/ma14195787