한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제17권3호
  • /
  • Pages.71-77
  • /
  • 2018
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

3.5톤 상용차용 액슬샤프트의 피로강도 개선에 대한 연구

A Study on the Structural Strength Fatigue Improvement of an Axle Shaft for a 3.5-Ton Commercial Vehicle

  • Moon, Hong-Ju (Kunsan Advanced Technology Innovation Center, Kunsan National UNIV.) ;
  • Sim, Ki-Joong (Kunsan Advanced Technology Innovation Center, Kunsan National UNIV.) ;
  • Jeon, Namjin (The Institute of Technology, Hwa Shin Co)
  • 투고 : 2018.03.28
  • 심사 : 2018.05.10
  • 발행 : 2018.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper suggests how to improve the fatigue strength of an axle shaft, which is the vulnerable part of an axle shaft system for a 3.5-ton commercial vehicle. The axle shaft is composed of a universal joint with a spider and yoke, yoke shaft, and so on. Structural analysis of the initial axle shaft was conducted to select the exact area for structural strength fatigue improvement, and as a result, the inner/outer yoke shaft and spider were selected. Four cases considered design variables, such as length and thickness, to verify the enhanced durability of the axle shaft, and fatigue analysis was conducted. Finally, we suggest that the axle shaft system satisfied the working conditions for a 3.5-ton commercial vehicle.

키워드

참고문헌

  1. Bayrakceken, H., Tasgetiren, S. and Yavuz, I., " Two Cases of Failure in the Power Transmission System on Vehicles: A Unversal Joint Yoke and a Drive Shaft", Engineering Failure Analysis, Vol. 14, pp. 716-724, 2007 https://doi.org/10.1016/j.engfailanal.2006.03.003
  2. Kim, D. S., Kim, H. E., Yoon, S. H. and Kang, E. S., "Lifetime Estimation of an Axle Drive Shaft by Calibrated Accelerated Life Test Method", Journal of the KSME, Vol. 34, No. 3, pp. 273-281, 2010. https://doi.org/10.3795/KSME-A.2010.34.3.273
  3. Kang, D. H., Lee, B. J., Yun, C. B. and Kim, K. W., " Study on Torsional Strength oh Induction-Hardened Axle Shaft," Journal of the KSME, Vol. 34, No. 5, pp. 645-649, 2010. https://doi.org/10.3795/KSME-A.2010.34.5.645
  4. Avrigean, E., Pascu, A. M. and Oleksik, V. S., "Study of the Cardan Cross Using the Experimental and Analytical Method", Proceeding Engineering, Vol. 100, pp. 499-504, 2015. https://doi.org/10.1016/j.proeng.2015.01.396
  5. Oh, B. G., "Strength Analysis of Cross Groove Type Constant Velocity Joint Cage for Propeller Shaft", Transactions of KSAE, Vol. 16, No. 2, pp. 74-79, 2008.
  6. Kweon, S. S., Seo, K. W. and An, H. S., "Improve ment of NVH Performance for Premium Passenger Car Propeller Shaft", KSAE Annual Conference Proceedings, pp. 1345-1339, 2010.
  7. Choi, E. O,, Ahn, B. M., Hong, D. P. and Chung, T. J., "A Study on the Design of Propeller Shaft for Reduction of Torsional Vibration", Transactions of KSAE, Vol. 7, No. 7, pp. 221-228, 1999.
  8. Kweon, B. S., Lee, C. W., Shin, Y. I. and Yi, C. S., "A Study on the Vibration Analysis of Impeller and Shaft in Cryogenic Submerged Pumo", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 2, pp. 56-62, 2017. https://doi.org/10.14775/ksmpe.2016.16.2.056
  9. Cho, J. H., Moon, D. J. and Lee, J. SC., "A Study on the CAE analysis of Bed Multi-Tasking Machine for Automotive Power Train Shafts", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 1, pp. 9-14, 2015. https://doi.org/10.14775/ksmpe.2015.14.1.009
  10. Kweon, B. S., Lee, C. W., Shin, I. Y. and Yi, C. S., "A Study on the Vibration Analysis of Impeller and shaft in Cryogenic Submerged Pump", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 2, pp. 56-62, 2017. https://doi.org/10.14775/ksmpe.2016.16.2.056
  11. Ahn, S. H., Lam, K. W., Kim, T. I., Lee, M. Y. and Kim, D. K., "A Study on the Mechnical Properties by High-Frequency Induction Hardening of SCM440 Steel," Transactions of KSAE, Vol. 23, No. 2, pp. 74-80, 2009.
  12. Lee, S. J., Jeon, H. Y. and Sung, N. W., " The Study on Estimation of Fatigue Limited in Induction Surface Hardened S45C Steel", Transactions of KSAE, Vol. 6, No. 1, pp. 134-142, 1998.