Structural Engineering and Mechanics

  • 제66권5호
  • /
  • Pages.665-676
  • /
  • 2018
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

An efficient partial mixed finite element model for static and free vibration analyses of FGM plates rested on two-parameter elastic foundations

  • Lezgy-Nazargah, M. (Faculty of Civil Engineering, Hakim Sabzevari University) ;
  • Meshkani, Z. (Faculty of Civil Engineering, Hakim Sabzevari University)
  • 투고 : 2017.11.14
  • 심사 : 2018.02.27
  • 발행 : 2018.06.10
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, a four-node quadrilateral partial mixed plate element with low degrees of freedom (dofs) is developed for static and free vibration analysis of functionally graded material (FGM) plates rested on Winkler-Pasternak elastic foundations. The formulation of the presented finite element model is based on a parametrized mixed variational principle which is developed recently by the first author. The presented finite element model considers the effects of shear deformations and normal flexibility of the FGM plates without using any shear correction factor. It also fulfills the boundary conditions of the transverse shear and normal stresses on the top and bottom surfaces of the plate. Beside these capabilities, the number of unknown field variables of the plate is only six. The presented partial mixed finite element model has been validated through comparison with the results of the three-dimensional (3D) theory of elasticity and the results obtained from the classical and high-order plate theories available in the open literature.

키워드

참고문헌

  1. Akavci, S.S. (2014), "An efficient shear deformation theory for free vibration of functionally graded thick rectangular plates on elastic foundation", Compos. Struct., 108, 667-676. https://doi.org/10.1016/j.compstruct.2013.10.019
  2. Batra, R.C. (2007), "Higher-order shear and normal deformable theory for functionally graded incompressible linear elastic plates", Thin-Wall. Struct., 45(12), 974-982. https://doi.org/10.1016/j.tws.2007.07.008
  3. Brischetto, S. and Carrera, E. (2010), "Advanced mixed theories for bending analysis of functionally graded plates", Comput. Struct., 88(23-24), 1474-1483. https://doi.org/10.1016/j.compstruc.2008.04.004
  4. Buczkowski, R. and Torbacki, W. (2001), "Finite element modelling of thick plates on two-parameter elastic foundation", Int. J. Numer. Anal. Meth. Geomech., 25(14), 1409-1427. https://doi.org/10.1002/nag.187
  5. Hadji, L., Ait Amar Meziane, M., Abdelhak, Z., Hassaine Daouadji, T. and Adda Bedia, E.A. (2016), "Static and dynamic behavior of fgm plate using a new first shear deformation plate theory", Struct. Eng. Mech., 57(1), 127-140. https://doi.org/10.12989/sem.2016.57.1.127
  6. Hasani Baferani, A., Saidi, A.R. and Ehteshami, H. (2011), "Accurate solution for free vibration analysis of functionally graded thick rectangular plates resting on elastic foundation", Compos. Struct., 93(7), 1842-1853. https://doi.org/10.1016/j.compstruct.2011.01.020
  7. Hassaine Daouadji, T. and Adim, B. (2017), "Mechanical behaviour of fgm sandwich plates using a quasi-3D higher order shear and normal deformation theory", Struct. Eng. Mech., 61(1), 49-63. https://doi.org/10.12989/sem.2017.61.1.049
  8. Huang, Z.Y., Lu, C.F. and Chen, W.Q. (2008), "Benchmark solutions for functionally graded thick plates resting on Winkler-Pasternak elastic foundations", Compos. Struct., 85(2), 95-104. https://doi.org/10.1016/j.compstruct.2007.10.010
  9. Kitipornchai, S., Yang, J. and Liew, K.M. (2006), "Random vibration of the functionally graded laminates in thermal environments", Comput. Meth. Appl. Mech. Eng., 195(9-12), 1075-1095. https://doi.org/10.1016/j.cma.2005.01.016
  10. Lee, N.S. and Bathe, K.J. (1993), "Effects of element distortions on the performance of isoparametric elements", Int. J. Numer. Meth. Eng., 36(20), 3553-3576. https://doi.org/10.1002/nme.1620362009
  11. Lezgy-Nazargah, M. (2015a), "A three-dimensional exact statespace solution for cylindrical bending of continuously nonhomogenous piezoelectric laminated plates with arbitrary gradient composition", Arch. Mech., 67(1), 25-51.
  12. Lezgy-Nazargah, M. (2015b), "Fully coupled thermo-mechanical analysis of bi-directional FGM beams using NURBS isogeometric finite element approach", Aerosp. Sci. Technol., 45, 154-164. https://doi.org/10.1016/j.ast.2015.05.006
  13. Lezgy-Nazargah, M. (2016a), "A three-dimensional Peano series solution for the vibration of functionally graded piezoelectric laminates in cylindrical bending", Sci. Iranic. A, 23(3), 788-801. https://doi.org/10.24200/sci.2016.2159
  14. Lezgy-Nazargah, M. (2016b), "A high-performance parametrized mixed finite element model for bending and vibration analyses of thick plates", Acta Mech., 227(12), 3429-3450. https://doi.org/10.1007/s00707-016-1676-4
  15. Lezgy-Nazargah, M. and Cheraghi, N. (2017), "An exact Peano Series solution for bending analysis of imperfect layered FG neutral magneto-electro-elastic plates resting on elastic foundations", Mech. Adv. Mater. Struct., 24(3), 183-199. https://doi.org/10.1080/15376494.2015.1124951
  16. Lu, C.F., Lim, C.W. and Chen, W.Q. (2009), "Exact solutions for free vibrations of functionally graded thick plates on elastic foundations", Mech. Adv. Mater. Struct., 16(8), 576-584. https://doi.org/10.1080/15376490903138888
  17. Malekzadeh, P. (2009), "Three-dimensional free vibration analysis of thick functionally graded plates on elastic foundations", Compos. Struct., 89(3), 367-373. https://doi.org/10.1016/j.compstruct.2008.08.007
  18. Mantari, J.L. and Guedes Soares, C. (2014), "A trigonometric plate theory with 5-unknowns and stretching effect for advanced composite plates", Compos. Struct., 107, 396-405. https://doi.org/10.1016/j.compstruct.2013.07.046
  19. Mantari, J.L., Bonilla, E.M. and Guedes Soares, C. (2014), "A new tangential-exponential higher order shear deformation theory for advanced composite plates", Compos. Part B, 60, 319-328. https://doi.org/10.1016/j.compositesb.2013.12.001
  20. Matsunaga, H. (2008), "Free vibration and stability of functionally graded plates according to a 2-D higher-order deformation theory", Compos. Struct., 82(4), 499-512. https://doi.org/10.1016/j.compstruct.2007.01.030
  21. Neves, A.M.A., Ferreira, A.J.M., Carrera, E., Roque, C.M.C., Cinefra, M., Jorge, R.M.N. and Soares, C.M.M. (2011), "Bending of FGM plates by a sinusoidal plate formulation and collocation with radial basis functions", Mech. Res. Commun., 38(5), 368-371. https://doi.org/10.1016/j.mechrescom.2011.04.011
  22. Prathap, G., Senthilkumar, V. and Manju, S. (2006) "Mesh distortion immunity of finite elements and the best-fit paradigm" Sadhan., 31(5), 505-514. https://doi.org/10.1007/BF02715909
  23. Shaban, M. and Alipour, M.M. (2011), "Semi-analytical solution for free vibration of thick functionally graded plates rested on elastic foundation with elastically restrained edge", Acta Mech. Sol. Sin., 24(4), 340-354. https://doi.org/10.1016/S0894-9166(11)60035-9
  24. Sheikholeslami, S.A. and Saidi, A.R. (2013), "Vibration analysis of functionally graded rectangular plates resting on elastic foundation using higher-order shear and normal deformable plate theory", Compos. Struct., 106, 350-361. https://doi.org/10.1016/j.compstruct.2013.06.016
  25. Sobhy, M. (2013), "Buckling and free vibration of exponentially graded sandwich plates resting on elastic foundations under various boundary conditions", Compos. Struct., 99, 76-87. https://doi.org/10.1016/j.compstruct.2012.11.018
  26. Thai, H.T. and Choi, D.H. (2012), "A refined shear deformation theory for free vibration of functionally graded plates on elastic foundation", Compos. Part B, 43(5), 2335-2347. https://doi.org/10.1016/j.compositesb.2011.11.062
  27. Yang, J., Liew, K.M. and Kitipornchai, S. (2005), "Stochastic analysis of compositionally graded plates with system randomness under static loading", Int. J. Mech. Sci., 47(10), 1519-1541. https://doi.org/10.1016/j.ijmecsci.2005.06.006
  28. Yas, M.H. and Sobhani Aragh, B. (2010), "Free vibration analysis of continuous grading fiber reinforced plates on elastic foundation", Int. J. Eng. Sci., 48(12), 1881-1895. https://doi.org/10.1016/j.ijengsci.2010.06.015
  29. Zenkour, M.A. (2006), "Generalized shear deformation theory for bending analysis of functionally graded plates", Appl. Math. Modell., 30(1), 67-84. https://doi.org/10.1016/j.apm.2005.03.009