References
- S. Y. Lee, K. Lee, Y. H. Lim, W. C. Jeong, 2013, Study on Heat Transfer Characteristic in Hot Press Forming Process, Trans. Mater. Process., Vol. 22, No. 2, pp. 101-107. https://doi.org/10.5228/KSTP.2013.22.2.101
- S. M. Hong, S. Y. Ryu, J. K. Park, S. J. Yoon, K. J. Kim, H. Y. Kim, 2009, Proc. Kor. Soc. Tech. Plat. Conf., Kor. Soc. Tech. Plast., Seoul, Korea, pp. 367-370.
- H. Hoffmann, H. So, H. Steinbeiss, 2007, Design of Hot Stamping Tools with Cooling System, CIRP Ann. Manuf. Technol., Vol. 56, No. 1, pp. 269-272. https://doi.org/10.1016/j.cirp.2007.05.062
- Y. H. Han, K. Lee, C. H. Suh, J. J. Lee, Y. H. Lim, 2015, Proc. Kor. Soc. Tech. Plat. Conf.(editor: Y. H. Son), Kor. Soc. Tech. Plast., Seoul, Korea, pp. 101-104.
- Y. Li, L. Ying, P. Hu, D. Shi, X. Zhao, M. Dai, 2013, The 11th Int. Conf. on Numer. Methods in Ind. Form. Process(editor: S. H. Zhang), AIP Publishing, Shenyang, China, pp. 471-177.
- T. Lin, H. W Song, S. Zhang, M. Cheng, W. Liu, 2014, Cooling Systems Design in Hot Stamping Tools by a Thermal-fluid-mechanical Coupled Approach, Adv. Mech. Eng., Vol. 6, pp. 1-12.
- K. Lee, J. J. Lee, C. H. Suh, 2016, Evaluation of Cooling Capability of Hot Press Forming Die with Thermal CFD Simulation, Trans. Mater. Process., Vol 25, No. 4, pp. 242-247. https://doi.org/10.5228/KSTP.2016.25.4.242
- J. W. Kum, O. J. Park, S. M. Hong, 2016, Tough High Thermal-Conductivity Tool Steel for Hot Press Forming, J. Kor. Soc. Manuf. Process. Eng., Vol 15, No 3, pp.111-114.
- S. H. Cha, P. K. Seo, J. D. Nam, M. S. Ahn, K. W. Won, 2014, Proc. Kor. Soc. Tech. Plat. Conf., Kor. Soc. Tech. Plast., Seoul, Korea, pp. 111-114.
- J. Cui, C. Lei, Z. Xing, C. Li, 2012, Microstructure Distribution and Mechanical Properties Prediction of Boron Alloy During Hot Forming using FE Simulation, Mater. Sci. Eng. A, Vol. 535, pp. 241-251. https://doi.org/10.1016/j.msea.2011.12.075
- P. Bosetti, S. Bruschi, T. Stoehr, J. Lechler, M. Merklein, 2010, Interlaboratory Comparison for Heat Transfer Coefficient Identification in Hot Stamping of High Strength Steels, Int. J. Mater. Form., Vol. 3, No. 1, pp. 817-820. https://doi.org/10.1007/s12289-010-0895-9
- N. H. Kim, C. G. Kang, 2010, The Prediction of Interfacial Heat Transfer Coefficient According to Contact Time and Pressure in Forging and Casting Die Materials for the Hot Press Forming, Trans. Mater. Process., Vol. 19, No. 6, pp. 378-386. https://doi.org/10.5228/KSTP.2010.19.6.378