International Journal of Naval Architecture and Ocean Engineering

  • 제10권3호
  • /
  • Pages.393-402
  • /
  • 2018
  • /
  • 2092-6782(pISSN)
  • /
  • 2092-6790(eISSN)
대한조선학회 (The Society of Naval Architects of Korea)
권호 표지
DOI QR코드

DOI QR Code

A large scale simulation of floe-ice fractures and validation against full-scale scenario

  • Lu, Wenjun (Sustainable Arctic Marine and Coastal Technology (SAMCoT), Centre for Research-based Innovation (CRI), Norwegian University of Science and Technology) ;
  • Heyn, Hans-Martin (Sustainable Arctic Marine and Coastal Technology (SAMCoT), Centre for Research-based Innovation (CRI), Norwegian University of Science and Technology) ;
  • Lubbad, Raed (Sustainable Arctic Marine and Coastal Technology (SAMCoT), Centre for Research-based Innovation (CRI), Norwegian University of Science and Technology) ;
  • Loset, Sveinung (Sustainable Arctic Marine and Coastal Technology (SAMCoT), Centre for Research-based Innovation (CRI), Norwegian University of Science and Technology)
  • 발행 : 2018.05.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

While interacting with a sloping structure, an ice floe may fracture in different patterns. For example, it can be local bending failure or global splitting failure depending on the contact properties, geometry and confinement of the ice floe. Modelling these different fracture patterns as a natural outcome of numerical simulations is rather challenging. This is mainly because the effects of crack propagation, crack branching, multi fracturing modes and eventual fragmentation within a solid material are still questions to be answered by the on-going research in the Computational Mechanic community. In order to simulate the fracturing of ice floes with arbitrary geometries and confinement; and also to simulate the fracturing events at such a large scale yet with sufficient efficiency, we propose a semi-analytical/empirical and semi-numerical approach; but with focus on the global splitting failure mode in this paper. The simulation method is validated against data we collected during the Oden Arctic Technology Research Cruise 2015 (OATRC2015). The data include: 1) camera images based on which we specify the exact geometry of ice floes before and after an impact and fracturing event; 2) IMU data based on which the global dynamic force encountered by the icebreaker is extracted for the impact event. It was found that this method presents reasonably accurate results and realistic fracturing patterns upon given ice floes.

키워드

참고문헌

  1. Anderson, T.L., 2005. Fracture Mechanics: Fundamentals and Applications. CRC press.
  2. Belytschko, T., Black, T., 1999. Elastic crack growth in finite elements with minimal remeshing. Int. J. Numer. Meth. Eng. 45 (5), 601-620. https://doi.org/10.1002/(SICI)1097-0207(19990620)45:5<601::AID-NME598>3.0.CO;2-S
  3. Bjerkas, M., Skiple, A., Iver Roe, O., 2007. Applications of continuous wavelet transforms on ice load signals. Eng. Struct. 29 (7), 1450-1456. https://doi.org/10.1016/j.engstruct.2006.08.012
  4. Daley, C., 1999. Energy Based Ice Collision Forces. In: Proceedings of the 15th In- ternational Conference on Port and Ocean Engineering under Arctic Conditions. Helsinki University of Technology in Espoo, Finland.
  5. Dempsey, J.P., Adamson, R.M., Mulmule, S.V., 1999. Scale effects on the in-situ tensile strength and fracture of ice. Part II: first-year sea ice at Resolute, NWT. Int. J. Fract. 95 (1), 347-366. https://doi.org/10.1023/A:1018650303385
  6. Geetha, A., Murali, S., 2013. Automatic rectification of perspective distortion from a single image using plane homography. IJCSA 3 (5), 47-58. https://doi.org/10.5121/ijcsa.2013.3506
  7. Hutchinson, J.W., Suo, Z., 1991. Mixed mode cracking in layered materials. Adv. Appl. Mech. 29, 63-191.
  8. Ingraffea, A.R., Wawrzynek, P.A., 2004. Computational fracture mechanics a survey of the field. In: European Congress on Computational Methods in Applied Science and Engineering.
  9. Kerr, A.D., 1976. The bearing capacity of floating ice plates subjected to static or quasistatic loads. J. Glaciol. 17, 229-268.
  10. Kim, E., Hoyland, K., 2014. Experimental investigations of the energy absorption capacity of ice during crushing: is the specific energy scale independent?. In: Proceedings of the 22nd IAHR International Symposium on Ice, Singapore.
  11. Kinnunen, A., Tikanmaki, M., Heinonen, J., 2016. An energy model for ice crushing in ice-structure impact. In: 23 rd IAHR International Symposium on Ice, Ann Arbor, Michigan, USA, pp. 1-8.
  12. Kjerstad, O.K., Metrikin, I., Loset, S., Skjetne, R., 2015. Experimental and phenomenological investigation of dynamic positioning in managed ice. Cold Reg. Sci. Technol. 111, 67-79. https://doi.org/10.1016/j.coldregions.2014.11.015
  13. Liu, Z., Amdahl, J., Loset, S., 2011. Plasticity based material modelling of ice and its application to ship-iceberg impacts. Cold Reg. Sci. Technol. 65 (3), 326-334. https://doi.org/10.1016/j.coldregions.2010.10.005
  14. Lu, W., Lubbad, R., Loset, S., 2015a. In-plane fracture of an ice floe: a theoretical study on the splitting failure mode. Cold Reg. Sci. Technol. 110 (0), 77-101. https://doi.org/10.1016/j.coldregions.2014.11.007
  15. Lu, W., Lubbad, R., Loset, S., 2015b. Out-of-plane failure of an ice floe: radial-crack-initiation-controlled fracture. Cold Reg. Sci. Technol. 119, 183-203. https://doi.org/10.1016/j.coldregions.2015.08.009
  16. Lu, W., Lubbad, R., Loset, S., 2015c. Tentative fracture mechanisms of the parallel channel effect during ice management. In: Kim, E., Lu, W., Hoyland, K. (Eds.), The 23rd International Conference on Port and Ocean Engineering under Arctic Conditions, Trondheim, Norway.
  17. Lu, W., Lubbad, R., Loset, S., Kashafutdinov, M., 2016. Fracture of an ice floe: local out-of-plane flexural failures versus global in-plane splitting failure. Cold Reg. Sci. Technol. 123, 1-13. https://doi.org/10.1016/j.coldregions.2015.11.010
  18. Lu, W., Lubbad, R., Loset, S., Skjetne, R., 2016a. parallel channel tests during ice management operations in the Arctic Ocean. In: Arctic Technology Conference 2016, St. John's, Newfoundland and Labrador.
  19. Lu, W., Zhang, Q., Lubbad, R., Loset, S., Skjetne, R., 2016b. A shipborne measurement system to acquire sea ice thickness and concentration at engineering scale. In: Arctic Technology Conference 2016, St. John's, Newfoundland and Labrador.
  20. Lubbad, R., Loset, S., 2011. A numerical model for real-time simulation of ship-ice interaction. Cold Reg. Sci. Technol. 65 (2), 111-127. https://doi.org/10.1016/j.coldregions.2010.09.004
  21. Lubbad, R., Loset, S., Hedman, U., Holub, C., Matskevitch, D., 2016. Oden arctic Technology research cruise 2015. In: Proc. Of the Arctic Technology Conference (ATC), St. Johns's, Newfoundland and Labardor, Canada.
  22. Nevel, D.E., 1958. The Theory of a Narrow Infinite Wedge on an Elastic Foundation. U. S. Army Snow Ice and Permafrost Research Establishment, Corps of Engineering.
  23. Nevel, D.E., 1965. A Semi-infinite Plate on an Elastic Foundation. U. S. Army Snow Ice and Permafrost Research Establishment, Corps of Engineering.
  24. Nevel, D.E., 1972. The ultimate failure of a floating ice sheet. In: International Association for Hydraulic Research, Ice Symposium, pp. 17-22.
  25. Panfilov, D., 1960. Experimental Investigation of the Carrying Capacity of a Floating Ice Plate, vol. 64. Izvestia Vsesojuznogo Nauchno-Issledovatelsskogo Instituta Gidratekhniki, pp. 80-88.
  26. Schulson, E.M., Duval, P., 2009. Creep and Fracture of Ice, vol. 1. Cambridge University Press, Cambridge, pp. 190-211.

피인용 문헌

  1. Performance quantification of icebreaker operations in ice management by numerical simulations vol.194, pp.None, 2022, https://doi.org/10.1016/j.coldregions.2021.103435