Structural Engineering and Mechanics

  • 제66권4호
  • /
  • Pages.505-513
  • /
  • 2018
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Geomechanical and thermal reservoir simulation during steam flooding

  • Taghizadeh, Roohollah (Department of Mining Engineering, Science and Research Branch, Islamic Azad University) ;
  • Goshtasbi, Kamran (Department of Mining Engineering, Faculty of Engineering, Tarbiat Modares University) ;
  • Manshad, Abbas Khaksar (Department of Petroleum Engineering, Faculty of Petroleum Engineering, Petroleum University of Technology) ;
  • Ahangari, Kaveh (Department of Mining Engineering, Science and Research Branch, Islamic Azad University)
  • 투고 : 2017.05.14
  • 심사 : 2018.02.22
  • 발행 : 2018.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

Steam flooding is widely used in heavy oil reservoir with coupling effects among the formation temperature change, fluid flow and solid deformation. The effective stress, porosity and permeability in this process can be affected by the multi-physical coupling of thermal, hydraulic and mechanical processes (THM), resulting in a complex interaction of geomechanical effects and multiphase flow in the porous media. Quantification of the state of deformation and stress in the reservoir is therefore essential for the correct prediction of reservoir efficiency and productivity. This paper presents a coupled fluid flow, thermal and geomechanical model employing a program (MATLAB interface code), which was developed to couple conventional reservoir (ECLIPSE) and geomechanical (ABAQUS) simulators for coupled THM processes in multiphase reservoir modeling. In each simulation cycle, time dependent reservoir pressure and temperature fields obtained from three dimensional compositional reservoir models were transferred into finite element reservoir geomechanical models in ABAQUS as multi-phase flow in deforming reservoirs cannot be performed within ABAQUS and new porosity and permeability are obtained using volumetric strains for the next analysis step. Finally, the proposed approach is illustrated on a complex coupled problem related to steam flooding in an oil reservoir. The reservoir coupled study showed that permeability and porosity increase during the injection scenario and increasing rate around injection wells exceed those of other similar comparable cases. Also, during injection, the uplift occurred very fast just above the injection wells resulting in plastic deformation.

키워드

참고문헌

  1. Angus, D.A., Dutko, M., Kristiansen, T.G., Fisher, Q.J., Kendall, J.M., Baird, A.F., Verdon, J.P., Barkved, O.I., Yu, J. and Zhao, S. (2015), "Integrated hydro-mechanical and seismic modelling of the valhall reservoir: A case study of predicting subsidence, AVOA and microseismicity", Geomech. Energy Environ., 2, 32-44. https://doi.org/10.1016/j.gete.2015.05.002
  2. Biot, M.A. (1940), "General theory of three-dimensional consolidation", J. Appl. Phys., 12, 155-164.
  3. Closmann, P.J. and Bradley, W.B. (1979), "The effect of temperature on tensile and compressive strengths and young's modulus of oil shale", SPE J., 19(5), 301-312. https://doi.org/10.2118/6734-PA
  4. Dusseault, M.B. and Collins, P.M. (2008), Geomechanics Effects in Thermal Processes for Heavy Oil Exploitation, CSEG Recorder, 20-23.
  5. Elyasi, A., Goshtasbi, K. and Hashemolhosseini, H. (2016), "A coupled geomechanical reservoir simulation analysis of $CO_2$-EOR: A case study", Geomech. Eng., 10(4), 423-436. https://doi.org/10.12989/gae.2016.10.4.423
  6. Elyasi, A., Goshtasbi, K. and Hashemolhosseini, H. (2016), "Coupled solid and fluid mechanics simulation for estimating optimum injection pressure during reservoir CO2-EOR", Struct. Eng. Mech., 59(1), 37-57. https://doi.org/10.12989/sem.2016.59.1.037
  7. Eppelbaum, L., Kutasov, I. and Pilchin, A. (2014), "Thermal properties of rocks and density of fluids", Appl. Geotherm., 99-149.
  8. Goodarzi, S., Settari, A., Zoback, M. and Keith, D. (2010), "Thermal aspects of geomechanics and induced fracturing in $CO_2$ injection with application to $CO_2$ sequestration in Ohio River Valley", Proceedings of the Society of Petroleum Engineers International Conference on $CO_2$ Capture, Storage, and Utilization, Louisiana, U.S.A., November.
  9. Handing, J. and Hager. R.V.J. (1957), "Experimental deformation of sedimentary rocks under confining pressure: Tests at room temperature on dry samples", Bullet. Am. Assoc. Petrol. Geolog., 41(1), 1-50.
  10. Horsrud, P., SOnstebO, E.F. and BOe, R. (1998), "Mechanical and petrophysical properties of North Sea shales", Int. J. Rock Mech. Min. Sci., 35(8), 1009-1020. https://doi.org/10.1016/S0148-9062(98)00162-4
  11. Kolditz, O., Gorke, U.J., Shao, H. and Wang, W. (2012), Thermo-Hydro-Mechanical-Chemical Processes in Porous Media: Benchmarks and Examples, Heidelberg, Springer.
  12. Lamy-Chappuis, B., Angus, D.A., Fisher, Q., Grattoni, C.A. and Yardley, B.W.D. (2014), "Rapid porosity and permeability changes of calcareous sandstone due to $CO_2$-enriched brine injection", Geophys. Res. Lett., 41(2), 399-406. https://doi.org/10.1002/2013GL058534
  13. Lempp, C. and Welte, D.H. (1994), "The effect of temperature on rock mechanical properties and fracture mechanisms in source rocks experimental results", Proceedings of the Rock Mechanics in Petroleum Engineering, Delft, the Netherlands, August.
  14. Longuemare, P., Mainguy, M., Lemonnier, P., Onaisi, A., Gerard, C. and Koutsabeloulis, N. (2002), "Geomechanics in reservoir simulation: Overview of coupling methods and field case study", Oil Gas Sci. Technol., 57(5), 471-483. https://doi.org/10.2516/ogst:2002031
  15. Lynch, T., Fisher, Q., Angus. D.A. and Lorinczi, P. (2013), "Investigating stress path hysteresis in a $CO_2$ injection scenario using coupled geomechanical-fluid flow modelling", Energy Proc., 37, 3833-3841. https://doi.org/10.1016/j.egypro.2013.06.280
  16. Mainguy, M. and Longuemare, P. (2002), "Coupling fluid flow and rock mechanics: Formulations of the partial coupling between reservoir and geomechanical simulators", Oil Gas Sci. Technol.-Rev. IFP, 57(4), 355-367. https://doi.org/10.2516/ogst:2002023
  17. Setudehnia, A. (1978), "The mesozoic sequence in southwest Iran and adjacent area", J. Petrol. Geol., 1(1), 3-42. https://doi.org/10.1111/j.1747-5457.1978.tb00599.x
  18. Touhidi-Baghini, A. (1998), "Absolute permeability of McMurray formation oil sands at low confining stresses", Ph.D. Dissertation, University of Alberta, Alberta, Canada.
  19. Tran, D., Buchanan, L. and Nghiem, L. (2008), "Improved gridding technique for coupling geomechanics to reservoir flow", Proceedings of the Annual Technical Conference and Exhibition, Denver, Colorado, U.S.A., September.
  20. Wang, W., Kosakowski, G. and Kolditz, O. (2009), "A parallel finite element scheme for thermo-hydro-mechanical (THM) coupled problems in porous media", Comput. Geosci., 35(8), 1631-1641. https://doi.org/10.1016/j.cageo.2008.07.007
  21. Watanabe, N., Wang, W., McDermott, C., Taniguchi, T. and Kolditz, O. (2010), "Uncertainty analysis of thermo-hydro-mechanical coupled processes in heterogeneous porous media", Comput. Mech., 45(4), 263-280. https://doi.org/10.1007/s00466-009-0445-9