Steel and Composite Structures

  • 제27권4호
  • /
  • Pages.401-416
  • /
  • 2018
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Simplified equations for Vierendeel design calculations of composite beams with web openings

  • Panedpojaman, Pattamad (Department of Civil Engineering, Faculty of Engineering, Prince of Songkla University)
  • 투고 : 2017.07.13
  • 심사 : 2018.03.17
  • 발행 : 2018.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

Composite beams with web openings are vulnerable to Vierendeel bending failure. The available methods provide quite conservative estimates of Vierendeel bending resistance. An alternative design method to compute the resistance was proposed in this study, based on quadratic nonlinear interactions of normalized shear force, axial force and Vierendeel bending moment. The interactions of the top and bottom Tee section must satisfy mutual conditions to prevent the Vierendeel failure. The normalized shear force and Vierendeel bending moment of the composite part were used instead in the top Tee interaction. The top Tee axial force was computed based on force equilibrium. Based on a rigid-plastic model, the composite resistance is estimated using an effective slab width of the vertical shear resistance. On using the proposed method, nonlinear reductions due to shear loads and axial forces are not required, in contrast to prior methods. The proposed method was validated against experiments from literature. The method limitations and accuracy as well as the Vierendeel behavior were investigated by finite element simulations, with varied composite beam parameters. The proposed design loads are less conservative than earlier estimates and deviate less from the simulations.

키워드

과제정보

연구 과제 주관 기관 : Prince of Songkla University

참고문헌

  1. ANSYS (2007), ANSYS Guide - Release 11.0 Documentation, Ansys Inc.
  2. Bake, S. (2010), "Cellular beams at ambient and elevated temperatures", Ph.D. Dissertations; School of Mechanical, Aerospace and Civil Engineering, MACE, The University of Manchester, Manchester, UK.
  3. BS EN 1993-1-1 (2005), Eurocode 3: Design of Steel Structures Part 1-1: General Rules and Rules for Buildings, British Standards Institution.
  4. BS EN 1992-1-1 (2004), Eurocode 2: Design of Concrete Structures - Part 1-1 : General Rules and Rules for Buildings, British Standards Institution.
  5. BS EN 1994-1-1 (2004), Eurocode 4: Design of Steel and Concrete Composite Structures. Part 1.1: General Rules and Rules for Building, British Standards Institution.
  6. Clawson, W.C. and Darwin, D. (1980), "Composite Beams with Web Openings", SM Report No 4; University of Kansas Centre for Research, USA.
  7. Chung, K.F. and Lawson, R.M. (2001), "Simplified design of composite beams with large web openings to Eurocode 4", J. Constr. Steel Res., 57(2), 135-163. https://doi.org/10.1016/S0143-974X(00)00011-0
  8. Chung, K.F., Ko, C.H. and Wang, A.J. (2005), "Design of steel and composite beams with web openings-verification using finite element method", Steel compos. Struct., Int. J., 5(2-3), 203-233. https://doi.org/10.12989/scs.2005.5.2_3.203
  9. Donahey, R.C. and Darwin, D. (1986), "Performance and Design of Composite Beams with Web Openings", SM Report No 18; University of Kansas Centre for Research, USA.
  10. Durif, S., Bouchair, A. and Bacconnet, C. (2015), "Elastic rotational restraint of web-post in cellular beams with sinusoidal openings", Steel Compos. Struct., Int. J., 18(2), 325-344. https://doi.org/10.12989/scs.2015.18.2.325
  11. Ellobody, E. and Young, B. (2006), "Performance of shear connection in composite beams with profiled steel sheeting", J. Constr. Steel Res., 62(7), 682-694. https://doi.org/10.1016/j.jcsr.2005.11.004
  12. Erdal, F. (2015), "The comparative analysis of optimal designed web expanded beams via improved harmony search method, Struct. Eng. Mech., Int. J., 54(4), 665-691. https://doi.org/10.12989/sem.2015.54.4.665
  13. Erdal, F. (2016), "Effect of stiffeners on failure analyses of optimally designed perforated steel beams", Steel Compos. Struct., Int. J., 22(1), 183-201. https://doi.org/10.12989/scs.2016.22.1.183
  14. Gattesco, N. (1999), "Analytical modelling of nonlinear behaviour of composite beams with deformable connection", J. Constr. Steel Res., 52(2), 195-218. https://doi.org/10.1016/S0143-974X(99)00026-7
  15. Kataoka, M.N., Friedrich, J.T. and El Debs, A.H.C. (2017), "Experimental investigation of longitudinal shear behavior for composite floor slab", Steel Compos. Struct., Int. J., 23(3), 351-362. https://doi.org/10.12989/scs.2017.23.3.351
  16. Ko, C. (2002), "A unified approach for steel and composite beams with web openings", Ph.D. Dissertations; Hong Kong Polytechnic University, Hong Kong.
  17. Lawson, R.M. (2011), Design of Composite Beams with Web Openings, The Steel Construction Institute Publication 355.
  18. Lawson, R.M., Lim, J., Hicks, S.J. and Simms, I. (2006), "Design of composite asymmetric cellularbeams and beams with large web openings", J. Constr. Steel Res., 62(6), 614-629. https://doi.org/10.1016/j.jcsr.2005.09.012
  19. Lawson, R.M., Lim, J.B.P. and Popo-Ola, S.O. (2013), "Pull-out forces in shear connectors in composite beams with large web openings", J. Constr. Steel Res., 87, 48-59. https://doi.org/10.1016/j.jcsr.2013.03.025
  20. Lin, Z., Liu, Y. and He, J. (2014), "Behavior of stud connectors under combined shear and tension loads", Eng. Struct., 81, 362-376. https://doi.org/10.1016/j.engstruct.2014.10.016
  21. Liu, T.C.H. and Chung, K.F. (2003), "Steel beams with large web openings of various shapes and sizes: finite element investigation", J. Constr. Steel Res., 59(9), 1159-1176. https://doi.org/10.1016/S0143-974X(03)00030-0
  22. Mirza, O. and Uy, B. (2010), "Effects of the combination of axial and shear loading on the behaviour of headed stud steel anchors", Eng. Struct., 32(1), 93-105. https://doi.org/10.1016/j.engstruct.2009.08.019
  23. Nguyen, H.T. and Kim, S.E. (2009), "Finite element modeling of push-out tests for large stud shear connectors", J. Constr. Steel Res., 65(10-11), 1909-1920. https://doi.org/10.1016/j.jcsr.2009.06.010
  24. Panedpojaman, P. and Thepchatri, T. (2013), "Finite element investigation on deflection of cellular beams with various configurations", Int. J. Steel Struct., 13(3), 487-494. https://doi.org/10.1007/s13296-013-3008-z
  25. Panedpojaman, P., Thepchatri, T. and Limkatanyu, S. (2014), "Novel design equations for shear strength of local web-post buckling in cellular beams", Thin-Wall Struct., 76, 92-104. https://doi.org/10.1016/j.tws.2013.11.007
  26. Panedpojaman, P., Thepchatri, T. and Limkatanyu, S. (2015), "Novel simplified equations for Vierendeel design of beams with (elongated) circular openings", J. Constr. Steel Res., 112, 10-21. https://doi.org/10.1016/j.jcsr.2015.04.007
  27. Panedpojaman, P., Sae-Long, W. and Chub-uppakarn, T. (2016), "Cellular beam design for resistance to inelastic lateral-torsional buckling", Thin-Wall Struct., 99, 182-194. https://doi.org/10.1016/j.tws.2015.08.026
  28. Serror, M.H., Hamed, A.N. and Mourad, S.A. (2016), "Numerical study on buckling of steel web plates with openings", Steel Compos. Struct., Int. J., 22(6), 1417-1443. https://doi.org/10.12989/scs.2016.22.6.1417
  29. Sheehan, T., Dai, X., Lam, D., Aggelopoulos, E., Lawson, M. and Obiala, R. (2016), "Experimental study on long spanning composite cellular beam under flexure and shear", J. Constr. Steel Res., 116, 40-54. https://doi.org/10.1016/j.jcsr.2015.08.047
  30. Wang, A.J. and Chung, K.F. (2008), "Advanced finite element modelling of perforated composite beams with flexible shear connectors", Eng. Struct., 30(10), 2724-2738. https://doi.org/10.1016/j.engstruct.2008.03.001
  31. Ward, J.K. (1990), Design of Composite and Non-composite Cellular Beams, The Steel Construction Institute Publication 100.