Computers and Concrete

  • 제21권5호
  • /
  • Pages.583-592
  • /
  • 2018
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Finite element analysis of RC walls with different geometries under impact loading

  • Husem, Metin (Department of Civil Engineering, Karadeniz Technical University) ;
  • Cosgun, Suleyman I. (Department of Civil Engineering, Karadeniz Technical University) ;
  • Sesli, Hasan (Department of Civil Engineering, Karadeniz Technical University)
  • 투고 : 2017.10.25
  • 심사 : 2018.01.29
  • 발행 : 2018.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

Today, buildings are exposed to the effects such as explosion and impact loads. Usually, explosion and impact loads that act on the buildings such as nuclear power plants, airports, defense industry and military facilities, can occur occasionally on the normal buildings because of some reasons like drop weight impacts, natural gas system explosions, and terrorist attacks. Therefore, it has become important to examine the behavior of reinforced concrete (RC) structures under impact loading. Development of computational mechanics has facilitated the modeling of such load conditions. In this study, three kinds of RC walls that have different geometric forms (square, ellipse, and circle) and used in guardhouses with same usage area were modeled with Abaqus finite element software. The three configurations were subjected to the same impact energy to determine the geometric form that gives the best behavior under the impact loading. As a result of the analyses, the transverse impact forces and failure modes of RC walls under impact loading were obtained. Circular formed (CF) reinforced concrete wall which has same impact resistance in each direction had more advantages. Nonetheless, in the case of the impact loading occurring in the major axis direction of the ellipse (EF-1), the elliptical formed reinforced concrete wall has higher impact resistance.

키워드

참고문헌

  1. ABAQUS Analysis User‟s Manual (2008), Version 6.8.
  2. Abbas, H., Gupta, N.K. and Alam, M. (2004), "Nonlinear response of concrete beams and plates under impact loading", Int. J. Impact Eng., 30(8), 1039-1053. https://doi.org/10.1016/j.ijimpeng.2004.06.011
  3. Atou, T., Sano, Y., Katayama, M. and Hayashi, S. (2013), "Damage evaluation of reinforced concrete columns by hypervelocity impact", Procedia Eng., 58, 348-354. https://doi.org/10.1016/j.proeng.2013.05.039
  4. Chen, Y. and May, I.M. (2009), "Reinforced concrete members under drop-weight impact", Struct. Build., 162, 45-56. https://doi.org/10.1680/stbu.2009.162.1.45
  5. Cundall, P.A. (1971), "A computer model for simulating progressive large scale movement in blocky rock system". Symposium ISRM, Proc., 2, 129-136.
  6. Hanchak, S.J., Forrestal, M.J., Young, E.R. and Ehrgott, J.Q. (1992), "Perforation of concrete slabs with 48 MPa (7 ksi) and 140 MPa (20 ksi) unconfined compressive strengths", Int. J. Impact Eng., 12, 1-7. https://doi.org/10.1016/0734-743X(92)90282-X
  7. Hibbitt, H., Karlsson, B. and Sorensen P. (2011), "ABAQUS Analysis user‟s manual version 6.11", Dassault Systemes Simulia Corp., Providence, RI, USA.
  8. Husem, M. and Cosgun, S.I. (2016), "Behavior of reinforced concrete plates under impact loading: different support conditions and sizes", Comput. Concrete, 18(3), 389-404. https://doi.org/10.12989/cac.2016.18.3.389
  9. Institute of Turkish Standards (2000), "Requirements for design and construction of reinforced concrete structures", Turkish Standard Institute, 11-12.
  10. Lee, J. and Fenves, G. (1998), "Plastic-damage model for cyclic loading of concrete structure", J. Eng. Mech., 24(8), 892-900.
  11. Lubliner, J., Oliver, J., Oller, S. and Onate, E. (1989), "A plasticdamage model for concrete", Int. J. Solid. Struct., 25(3), 299-326. https://doi.org/10.1016/0020-7683(89)90050-4
  12. Malm, R. (2009), "Predicting shear type cracks initiation and growth in concrete with nonlinear finite elements methods", Ph.D. Dissertation, Royal Institute of Technology, Stockholm, Sweden.
  13. Martin, O. (2010), "Comparison of different constitutive models for concrete in ABAQUS-explicit for missile impact analyses", JRF Scientific and Technical Report, European Commission Joint Research Centre Institute for Energy, Netherlands.
  14. Martin, S.W. (1994), "Modeling of local impact effects on plain and reinforced concrete", Int. Concrete Abs. Portal, 91(2), 178-187.
  15. Ong, K.C.G., Basheerkhan, M. and Paramasivam, P. (1999), "Resistance of fibre concrete slabs to low velocity projectile impact", Cement Concrete Compos., 21(5-6), 391-401. https://doi.org/10.1016/S0958-9465(99)00024-4
  16. Perumal, R. (2014), "Performance and modeling of highperformance steel fiber reinforced concrete underimpact loads", Comput. Concrete, 13(2), 255-270. https://doi.org/10.12989/cac.2014.13.2.255
  17. Pham, T.M. and Hao, H. (2016), "Review of concrete structures strengthened with FRP against impact loading", Struct., 7, 59-70. https://doi.org/10.1016/j.istruc.2016.05.003
  18. Saito, H., Imamura, A., Takeuchi, M., Okamoto, S., Kasai, Y., Tsubota, H. and Yoshimura, M. (1995), "Loading capacities and failure modes of various reinforced-concrete slabs subjected to high-speed loading", Nucl. Eng. Des., 156, 277-286. https://doi.org/10.1016/0029-5493(94)00953-V
  19. Sawamoto, Y., Tsubota, H., Kasai, Y. and Koshika, N. (1998), "Analytical studies on local damage to reinforced concrete structures under impact loading by discrete element method", Nucl. Eng. Des., 179(2), 157-177. https://doi.org/10.1016/S0029-5493(97)00268-9
  20. Tai, Y. and Tang, C. (2006), "Numerical simulation: The dynamic behavior of reinforced concrete plates under normal impact", Theo. Appl. Fract. Mech., 45, 117-127. https://doi.org/10.1016/j.tafmec.2006.02.007
  21. Thabet, A. and Haldane, D. (2000), "Three-dimensional simulation of nonlinear response of reinforced concrete members subjected to impact loading", ACI Struct. J., 97(5), 689-701.
  22. Trivedi, N. and Singh R.K. (2013), "Prediction of impact induced failure modes in reinforced concrete slabs through nonlinear transient dynamic finite element simulation", Ann. Nucl. Energy, 56, 109-121. https://doi.org/10.1016/j.anucene.2013.01.020
  23. Version, A. B. A. Q. U. S. (2016), Dassault Systemes Simulia.
  24. Wang, W., Zhang, D., Lu, F., Wang, S. and Tang, F. (2012) "Experimental study on scaling the explosion resistance of a one-way square reinforced concrete slab under a close-in blast loading", Int. J. Impact Eng., 49, 158-164. https://doi.org/10.1016/j.ijimpeng.2012.03.010
  25. Wang, W., Zhang, D., Lu, F., Wang, S.C. and Tang, F. (2013), "Experimental study and numerical simulation of the damage mode of a square reinforced concrete slab under close-in explosion", Eng. Fail. Anal., 27, 41-51. https://doi.org/10.1016/j.engfailanal.2012.07.010
  26. Zhang, M.H., Shim, V.P.W., Lu, G. and Chew, C.W. (2005), "Resistance of high-strength concrete to projectile impact", Int. J. Impact Eng., 31(5), 825-841. https://doi.org/10.1016/j.ijimpeng.2004.04.009
  27. Zineddin, M. and Krauthammer, T. (2007), "Dynamic response and behavior of reinforced concrete slabs under impact loading", Int. J. Impact Eng., 34(9), 1517-1534. https://doi.org/10.1016/j.ijimpeng.2006.10.012
  28. Zmindak, M., Pelagic, Z., Pastorek, P. Mocilan, M. and Vybost'ok, M. (2016), "Finite element modelling of high velocity impact on plate structures", Procedia Eng., 136, 162-168. https://doi.org/10.1016/j.proeng.2016.01.191