DOI QR코드

DOI QR Code

Flow structures around rectangular cylinder in the vicinity of a wall

  • Derakhshandeh, J.F. (School of Mechanical Engineering of University of Adelaide) ;
  • Alam, Md. Mahbub (Institute for Turbulence-Noise-Vibration Interaction and Control, Shenzhen Graduate School, Harbin Institute of Technology)
  • 투고 : 2017.10.02
  • 심사 : 2017.12.20
  • 발행 : 2018.05.25

초록

A numerical study is conducted on the flow characteristics of a rectangular cylinder (chord-to-width ratio C/W = 2 - 10) mounted close to a rigid wall at gap-to-width ratios G/W = 0.25 - 6.25. The effects of G/W and C/W on the Strouhal number, vortex structure, and time-mean drag and lift forces are examined. The results reveal that both G/W and C/W have strong influences on vortex structure, which significantly affects the forces on the cylinder. An increase in G/W leads to four different flow regimes, namely no vortex street flow (G/W < 0.75), single-row vortex street flow ($0.75{\leq}G/W{\leq}1.25$), inverted two-row vortex street flow ($1.25<G/W{\leq}2.5$), and two-row vortex street flow (G/W > 2.5). Both Strouhal number and time-mean drag are more sensitive to C/W than to G/W. For a given G/W, Strouhal number grows with C/W while time-mean drag decays with C/W, the growth and decay being large between C/W = 2 and 4. The time-mean drag is largest in the single-row vortex street regime, contributed by a large pressure on the front surface, regardless of C/W. A higher C/W, in general, leads to a higher time-mean lift. The maximum time-mean lift occurs for C/W = 10 at G/W = 0.75, while the minimum time-mean lift appears for C/W = 2 at the same G/W. The impact of C/W on the time-mean lift is more substantial in single-row vortex regime. The effect of G/W on the time-mean lift is larger at a larger C/W.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Alam, M.M. (2014), "The aerodynamics of a cylinder submerged in the wake of another", J. Fluid. Struct., 51, 393-400. https://doi.org/10.1016/j.jfluidstructs.2014.08.003
  2. Alam, M.M. (2016), "Lift forces induced by phase lag between the vortex sheddings from two tandem bluff bodies", J. Fluid. Struct., 65, 217-237. https://doi.org/10.1016/j.jfluidstructs.2016.05.008
  3. Alam, M.M. and Kim, S. (2009), "Free vibration of two identical circular cylinders in staggered arrangement", Fluid Dynam. Res., 41(3), 035507. https://doi.org/10.1088/0169-5983/41/3/035507
  4. Alam, M.M., Moriya, M., Takai, K. and Sakamoto, H. (2002), "Suppression of fluid forces acting on two square prisms in tandem arrangement by passive control of flow", J. Fluid. Struct., 16, 1073-1092. https://doi.org/10.1006/jfls.2002.0458
  5. Alam, M.M., Zhou, Y. and Wang, X.W. (2011), "The wake of two side-by-side square cylinders", J. Fluid. Mech., 669, 432-471. https://doi.org/10.1017/S0022112010005288
  6. Bearman, P.W. (1984), "Vortex shedding from oscillating bluff bodies", Annu. Rev. Fluid Mech., 16(1), 195-222. https://doi.org/10.1146/annurev.fl.16.010184.001211
  7. Bosch, G., Kappler, M. and Rodi, W. (1996), "Experiments on the flow past a square cylinder placed near a wall", Exp. Therm. Fluid Sci., 13(3), 292-305. https://doi.org/10.1016/S0894-1777(96)00087-8
  8. Buresti, G. and Lanciotti A. (1992), "Mean and fluctuating forces on a circular cylinder in cross-flow near a plane surface", J. Wind Eng. Ind. Aerod., 41(1-3), 639-650. https://doi.org/10.1016/0167-6105(92)90476-Q
  9. Celik, I.B., Ghia, U. and Roache, P.J. (2008), "Procedure for estimation and reporting of uncertainty due to discretization in CFD applications", J. Fluids Eng.-T ASME, 130(7).
  10. Derakhshandeh, J., Arjomandi M., Cazzolato B. and Dally B. (2014a), "Effect of a rigid wall on the vortex induced vibration of two staggered circular cylinders", Renew. Sust. Energ., 6(3), 033114. https://doi.org/10.1063/1.4879275
  11. Derakhshandeh, J., Arjomandi M., Dally B. and Cazzolato B. (2014b), "The effect of arrangement of two circular cylinders on the maximum efficiency of Vortex-Induced Vibration power using a Scale-Adaptive Simulation model", J. Fluid. Struct., 49, 654-666. https://doi.org/10.1016/j.jfluidstructs.2014.06.005
  12. Derakhshandeh, J., Arjomandi M., Dally B. and Cazzolato B. (2016), "Flow-induced vibration of an elastically mounted airfoil under the influence of the wake of a circular cylinder", Exp. Therm. Fluid Sci., 74, 58-72. https://doi.org/10.1016/j.expthermflusci.2015.12.003
  13. Derakhshandeh, J., Arjomandi, M., Cazzolato, B. and Dally, B. (2015), "Harnessing hydro-kinetic energy from wake-induced vibration using virtual mass spring damper system", Oean Eng., 108, 115-128.
  14. Durao, D., Heitor, M. and Pereira, J. (1988), "Measurements of turbulent and periodic flows around a square cross-section cylinder", Exp. Fluids, 6(5), 298-304. https://doi.org/10.1007/BF00538820
  15. Grass, A., Raven, P., Stuart, R. and Bray, J. (1984), "The influence of boundary layer velocity gradients and bed proximity on vortex shedding from free spanning pipelines", J. Energ, Resour, Technol., 106(1), 70-78. https://doi.org/10.1115/1.3231028
  16. Hourigan, K., Thompson, M. and Tan, B. (2001), "Self-sustained oscillations in flows around long blunt plates", J. Fluid. Struct., 15(3-4), 387-398. https://doi.org/10.1006/jfls.2000.0352
  17. Lee, B.E. (1975), "The effect of turbulence on the surface pressure field of a square prism", J. Fluid Mech., 69, 263-282. https://doi.org/10.1017/S0022112075001437
  18. Lei, C., Cheng, L. and Kavanagh, K. (1999), "Re-examination of the effect of a plane boundary on force and vortex shedding of a circular cylinder", J. Wind Eng. Ind. Aerod., 80(3), 263-286. https://doi.org/10.1016/S0167-6105(98)00204-9
  19. Mahir, N. (2009), "Three-dimensional flow around a square cylinder near a wall", Ocean Eng., 36(5), 357-367. https://doi.org/10.1016/j.oceaneng.2009.01.002
  20. Martinuzzi, R., Bailey, S. and Kopp, G. (2003), "Influence of wall proximity on vortex shedding from a square cylinder", Exp. Fluids, 34(5), 585-596. https://doi.org/10.1007/s00348-003-0594-0
  21. Mills, R., Sheridan, J. and Hourigan, K. (2002), "Response of base suction and vortex shedding from rectangular prisms to transverse forcing", J. Fluid. Mech., 461, 25.
  22. Mills, R., Sheridan, J. and Hourigan, K. (2003), "Particle image velocimetry and visualization of natural and forced flow around rectangular cylinders", J. Fluid Mech., 478, 299.
  23. Nakamura, Y., Ohya, Y. and Tsuruta, H. (1991), "Experiments on vortex shedding from flat plates with square leading and trailing edges", J. Fluid Mech., 222, 437-447. https://doi.org/10.1017/S0022112091001167
  24. Norberg, C. (2001), "Flow around a circular cylinder: aspects of fluctuating lift", J. Fluid. Struct., 15(3-4), 459-469. https://doi.org/10.1006/jfls.2000.0367
  25. Norberg, C. (2003), "Fluctuating lift on a circular cylinder: review and new measurements", J. Fluid. Struct., 17(1), 57-96. https://doi.org/10.1016/S0889-9746(02)00099-3
  26. Ozono, S., Ohya, Y., Nakamura, Y. and Nakayama, R. (1992), "Stepwise increase in the Strouhal number for flows around flat plates", Int. J. Numer. Meth. Fl., 15(9), 1025-1036. https://doi.org/10.1002/fld.1650150908
  27. Parkinson, G. (1989), "Phenomena and modelling of flow-induced vibrations of bluff bodies", Prog. Aerosp. Sci., 26(2), 169-224. https://doi.org/10.1016/0376-0421(89)90008-0
  28. Price, S., Sumner D., Smith J., Leong K. and Paidoussis, M. (2002), "Flow visualization around a circular cylinder near to a plane wall", J. Fluid. Struct., 16(2), 175-191. https://doi.org/10.1006/jfls.2001.0413
  29. Sarkar, S. and Sarkar, S. (2010), "Vortex dynamics of a cylinder wake in proximity to a wall", J. Fluid. Struct., 26(1), 19-40. https://doi.org/10.1016/j.jfluidstructs.2009.08.003
  30. Sohankar, A., and Etminan, A. (2009), "Forced-convection heat transfer from tandem square cylinders in cross flow at low Reynolds numbers", Int. J. Numer. Meth. Fl., 60, 733-751. https://doi.org/10.1002/fld.1909
  31. Sohankar, A., Norberg, C. and Davidson, L. (1999), "Numerical simulation of flow past a square cylinder", Proceedings of the FEDSM99-7172-3rd ASME/JSME Joint Fluids Engineering Conference.
  32. Tan, B., Thompson, M. and Hourigan, K. (2003), "Sources of acoustic resonance generated by flow around a long rectangular plate in a duct", J. Fluid. Struct., 18(6), 729-740. https://doi.org/10.1016/j.jfluidstructs.2003.08.016
  33. Taniguchi, S. and Miyakoshi, K. (1990), "Fluctuating fluid forces acting on a circular cylinder and interference with a plane wall", Exp. Fluids, 9(4), 197-204. https://doi.org/10.1007/BF00190418
  34. Wang, X., Hao, Z. and Tan, S. (2013), "Vortex-induced vibrations of a neutrally buoyant circular cylinder near a plane wall", J. Fluid. Struct., 39, 188-204. https://doi.org/10.1016/j.jfluidstructs.2013.02.012
  35. West, G.S. and Apelt, C.J. (1982), "The effect of tunnel blockage and aspect ratio on mean flow past a circular cylinder with Reynolds Number between 104 to 105", J. Fluid Mech., 14, 361-377.
  36. Williamson, C. and Govardhan, R. (2004), "Vortex-induced vibrations", Annu. Rev. Fluid Mech, 36, 413-455. https://doi.org/10.1146/annurev.fluid.36.050802.122128
  37. Wu, K. (1999), "An experimental investigation of the flow around a two-dimensional cylinder in the proximity of a solid wall: effect of the gap size", MESc thesis, Faculty of Engineering Science, The University of Western Ontario, London, Canada.
  38. Zdravkovich, M. (1997), "Flow around circular cylinders; vol. I fundamentals", J. Fluid Mech., 350(1), 377-378.
  39. Zheng, Q., and Alam, M.M., (2017), "Intrinsic features of flow past three square prisms in side-by-side arrangement", J. Fluid Mech., 826, 996-1033. https://doi.org/10.1017/jfm.2017.378

피인용 문헌

  1. A Numerical Study of Heat Transfer Enhancement by a Rectangular Cylinder Placed Parallel to the Heated Wall vol.141, pp.7, 2018, https://doi.org/10.1115/1.4043212
  2. Effect of corner modifications on 'Y' plan shaped tall building under wind load vol.30, pp.3, 2020, https://doi.org/10.12989/was.2020.30.3.245
  3. Comparison of aerodynamic coefficients of various types of Y-plan-shaped tall buildings vol.21, pp.7, 2020, https://doi.org/10.1007/s42107-020-00265-9
  4. Aerodynamic modifications for reduction of wind loads on cross plan shaped tall building vol.33, pp.2, 2018, https://doi.org/10.12989/was.2021.33.2.123