Smart Structures and Systems

  • 제21권5호
  • /
  • Pages.583-590
  • /
  • 2018
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Vibration analysis of mountain tunnel lining built with forepoling method

  • Gao, Yang (Key laboratory of Structural Health Monitoring and Control, Shijiazhuang Tiedao University) ;
  • Jiang, Yujing (Graduate School of Engineering, Nagasaki University) ;
  • Du, Yanliang (Key laboratory of Structural Health Monitoring and Control, Shijiazhuang Tiedao University) ;
  • Zhang, Qian (Key laboratory of Structural Health Monitoring and Control, Shijiazhuang Tiedao University) ;
  • Xu, Fei (Key laboratory of Structural Health Monitoring and Control, Shijiazhuang Tiedao University)
  • 투고 : 2017.12.02
  • 심사 : 2018.03.27
  • 발행 : 2018.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

Nowadays, many tunnels have been commissioned for several decades, which require effective inspection methods to assess their health conditions. The ambient vibration test has been widely adopted for the damage identification of concrete structures. In this study, the vibration characters of tunnel lining shells built with forepoling method was analyzed based on the analytical solutions of the Donnell-Mushtari shell theory. The broken rock, foreploing, rock-concrete contacts between rock mass and concrete lining, was represented by elastic boundaries with normal and shear stiffness. The stiffness of weak contacts has significant effects on the natural frequency of tunnel lining. Numerical simulations were also carried out to compare with the results of the analytical methods, showing that even though the low nature frequency is difficult to distinguish, the presented approach is convenient, effective and accurate to estimate the natural frequency of tunnel linings. Influences of the void, the lining thickness and the concrete type on natural frequencies were evaluated.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Aktan, A.E., Catbas, F.N., Grimmelsman, K.A. and Tsikos, C.J. (2000), "Issues in infrastructure health monitoring for management", J. Eng. Mech. - ASCE, 126, 711-724. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:7(711)
  2. Aremenakas, A.E., Gazis, D. and Herrmann, G. (1969), Free vibration of Circular Cylindrical Shells. Pergamon Press, Oxford.
  3. Bhalla, B.S., Yang, Zhao, Y.W. and Soh, C.K. (2005), "Structural health monitoring of underground facilities - Technological issues and challenges", Tunn. Undergr. Sp. Tech., 20, 487-500. https://doi.org/10.1016/j.tust.2005.03.003
  4. Blevins, R.D. (1979), Formulas for Natural Frequency and Mode Shape. Van Nostrand Reinhold, New York.
  5. Chowdhury, M.R. (1990), "Experimental modal testing and analysis of continuously supported structures", Proceedings of the 8th International Modal Analysis Conference, Florida, February 1990.
  6. Fuller, C.R. (1981), "The effect of wall discontinuities on the propagation of flexural waves in cylindrical shells", J. Sound Vib., 75, 207-228. https://doi.org/10.1016/0022-460X(81)90340-0
  7. Gao, Y., Jiang, Y., Li, B., Ogawa, Y. and Yang, L. (2012), "Research on health assessment technique of tunnel lining based on power spectrum density characteristics of microtremors", J. JSCE Division F1., 68(1), 111-118.
  8. Harari, A. (1978), "Wave propagation in a cylindrical shell with joint discontinuity", J. Shock Vib., 48, 53-61.
  9. Jiang, Y., Gao, Y. and Li, B. (2014), "Estimation of effect of voids on frequency response of mountain tunnel lining based on microtremor method", Tunn. Undergr. Sp. Tech., 42,184-194. https://doi.org/10.1016/j.tust.2014.03.004
  10. Leissa, A.W. (1973), Vibration of shells. Washington: NASA SP-288.
  11. Love, A.E.H. (1888), "The small free vibrations and deformations of a thin elastic shell", Philos. T. R. Soc. London, Ser. A, 179, 491-546. https://doi.org/10.1098/rsta.1888.0016
  12. Loveday, P.W. (1998), "Free vibration of elastically supported thin cylinders including gyroscopic effects", J. Sound Vib., 217, 547-562. https://doi.org/10.1006/jsvi.1998.1765
  13. Lur'ye, A.I. (1940), "General theory of elastic shells", Prikladnaya Matematika i Mekhanika, 4 , 7-34.
  14. Malmgren, L., Nordlund, E. and Rolund, C. (2005), "Adhesion strength and shrinkage of shotcrete", Tunn. Undergr. Sp. Tech., 20, 33-48. https://doi.org/10.1016/j.tust.2004.05.002
  15. Metrikine, A.V. and Vrouvenvelder, A.C. (2000), "Surface ground vibration due to a moving train in a tunnel: two-dimensional model", J. Sound Vib., 234, 43-66. https://doi.org/10.1006/jsvi.1999.2853
  16. Ni, Y.Q., Ye, X.W. and Ko, J.M. (2010), "Monitoring-based fatigue reliability assessment of steel bridges: analytical model and application", J. Struct. Eng. - ASCE, 136(12), 1563-1573. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000250
  17. Ni, Y.Q., Ye, X.W. and Ko, J.M. (2012), "Modeling of stress spectrum using long-term monitoring data and finite mixture distributions", J. Struct. Eng. - ASCE, 138(2), 175-183.
  18. Park, S. and Choi, S. (2008), Development of methodology for estimating the effective properties of containment buildings. Mid-term Report. Korea Institute of Nuclear Safety, KINS/HR-836.
  19. Soedel, W. (2004), Vibrations of Shells and Plates, third ed., Marcel Dekker, Inc.
  20. Timoshenko. S. (1959), Theory of Plates and Shells. McGraw-Hil, New York.
  21. UDEC - user's manual. Minneapolis, 2000, MN: Itasca Consulting Group Inc.