초록
리기다소나무를 구조용 집성재의 재료로 이용하기 위해 판면의 옹이와 대패가공 후 방치시간에 따른 수지 삼출량이 레조르시놀수지로 접착한 판재의 접착성능에 미치는 영향을 검토하였다. 고온($120{\sim}95^{\circ}C$) 및 저온($65{\sim}50^{\circ}C$)에서 건조한 리기다소나무의 수지 삼출량은 판목면이 정목면 보다 저온건조재가 고온건조재보다 많았다. 방치시간별로는 저온건조재는 3일째 고온건조재는 7일째에 최고함량을 보였고, 이후부터는 서서히 감소하여 15~90일에는 거의 차이가 없었다. 접착성능은 수지의 삼출이 많은 2~3일까지는 낮았으나 15일 이후에는 큰 차이가 없었으며, 고온 및 저온 건조재 모두 방치시간에 관계없이 KS 기준의 접착성능을 만족하였다. 옹이부가 포함된 적층 구성에서의 접착강도는 KS의 접착강도 기준 이상이었으나 목파율은 기준인 65% 이상을 만족하지 못하였다. 적층 단면구성(정목+정목, 판목+판목, 정목+판목)에 따른 접착성능은 고온 및 저온건조재 모두 모든 적층구성에서 KS의 기준을 크게 상회하였다.
In order to use Pitch pine (Pinus rigida Miller) as the material of the structural glued laminated timber, the effect of the amount of resin exudation due to storage time after the planning and the knot of the lamina were evaluated on the bonding properties of the glued board with resorcinol resin. For Pitch pine that was dried at high temperature ($120{\sim}95^{\circ}C$) and low temperature ($65{\sim}50^{\circ}C$), the flat sawn(tangential section) showed higher amount of resin exudation than the quarter sawn(radial section). And the low temperature drying wood showed higher resin exudation than the high temperature drying wood. The low and high temperature drying wood showed the highest amount of resin exudation on the 3rd day and 7th day, respectively and they were gradually decreased. However, there were no significant differences from 15 to 90 days. Adhesion performances were low until 2~3 days with high exudation of resin, but there were no significant differences after 15 days. Both high temperature and low temperature drying woods satisfied the Korean standard regardless of the storage time. The adhesive strengths of the laminating parts including knots were higher than those of KS criteria, but the wood failures were not satisfied the KS standard. Adhesive performances according to the laminating combinations (quarter sawn + quarter sawn, flat sawn + flat sawn, quarter sawn + flat sawn) were better than those of KS criteria in all laminating combinations in both high temperature and low temperature drying woods.