Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Review of stud shear resistance prediction in steel-concrete composite beams

  • Bonilla, Jorge (Department of Applied Mathematics, University of Ciego de A vila) ;
  • Bezerra, Luciano M. (Department of Civil and Environmental Engineering, University of Brasilia) ;
  • Mirambell, Enrique (Department of Civil and Environmental Engineering, Polytechnic University of Catalunya) ;
  • Massicotte, Bruno (Department of Civil, Geological and Mining Engineering, Polytechnic Montreal)
  • Received : 2017.09.27
  • Accepted : 2018.03.16
  • Published : 2018.05.10
⟨ Previous Next ⟩

Abstract

In steel-concrete composite beams, longitudinal shear forces are transferred across steel flange-concrete slab interface by means of shear connectors. The connector behavior is highly non-linear and involves several complex mechanisms. The design resistance and stiffness of composite beams depends on the shear connection behavior and the accuracy in the connector resistance prediction is essential. However determining the stud shear resistance is not an easy process: analytical methods do not give an adequate response to this problem and it is therefore necessary to use experimental methods. This paper present a summary of the main procedures to predict the resistance of the stud shear connectors embedded in solid slab, and stud shear connectors in composite slab using profiled steel sheeting with rib perpendicular to steel beam. A large number of experimental studies on the behavior of stud shear connectors and reported in the literature are also summarized. A comparison of the stud shear resistance prediction using six reference codes (AISC, AASHTO, Eurocode-4, GB50017, JSCE and AS2327.1) and other procedures reported in the literature against experimental results is presented. From this exercise, it is concluded that there are still inaccuracies in the prediction of stud shear resistance in all analysed procedures and that improvements are needed.

Keywords

References

  1. AASHTO (2014), Load and Resistance Factor Design (LRFD) Bridge design specifications, (7th Edition); American Association of State Highway and Transportation Officials, Washington, D.C., USA.
  2. AISC (1993), Load and Resistance Factor Design (LRFD) Specification for Structural Steel Building; American Institute of Steel Construction, Chicago, IL, USA.
  3. AISC (2010), Load and Resistance Factor Design (LRFD) Specification for Structural Steel Building; American Institute of Steel Construction, Chicago, IL, USA.
  4. Alenezi, K., Tahir, M.M., Alhajri, T., Badr, M.R.K. and Mirza, J. (2015), "Behavior of shear connectors in composite column of cold-formed steel with lipped C-channel assembled with ferrocement jacket", Constr. Build. Mater., 84, 39-45. https://doi.org/10.1016/j.conbuildmat.2015.03.015
  5. An, L. and Cederwall, K. (1996), "Push-out tests on studs in high strength and normal strength concrete", J. Constr. Steel Res., 36(1), 15-29. https://doi.org/10.1016/0143-974X(94)00036-H
  6. AS-2327.1 (2003), Composite structures, Part 1: Simply supported beams; Standard Australia International, Sidney, Australia.
  7. Ban, H., Bradford, M.A., Uy, B. and Liu, X. (2016), "Available rotation capacity of composite beams with high-strength materials under sagging moment", J. Constr. Steel Res., 118, 156-168. https://doi.org/10.1016/j.jcsr.2015.11.008
  8. Bonilla, J., Mirambell, E., Larrua, R. and Recarey, C. (2012), "Behavior and strength of welded stud shear connectors in composite beam", Rev. Fac. Ing. Univ. Antioquia, 63, 93-104.
  9. Bonilla, J., Bezerra, L.M., Larrua, R., Recarey, C. and Mirambell, E. (2015), "Study of stud shear connectors behaviour in composite beams with profiled steel sheeting", Revista de la Construccion, 14(3), 47-54.
  10. Chinn, J. (1965), "Pushout Tests on Lightweight Composite Slabs", Eng. J., AISC, 2(4), 129-134.
  11. Dai, X.H., Lam, D. and Saveri, E. (2015), "Effect of Concrete Strength and Stud Collar Size to Shear Capacity of Demountable Shear Connectors", J. Struct. Eng., 141(11), 4015025-1-10.
  12. Davies, C. (1967), "Small-scale push-out tests on welded stud shear connectors", Concrete, 1(9), 311-316.
  13. de Lima Araujo, D., Sales, M.W.R., de Paulo, S.M. and de Cresce El, A.L.H. (2016), "Headed steel stud connectors for composite steel beams with precast hollow-core slabs with structural topping", Eng. Struct., 107, 135-150. https://doi.org/10.1016/j.engstruct.2015.10.050
  14. Diaz, B., Easterling, W.S. and Murray, T.M. (1998), Behavior of Welded Shear Studs Used with 1.0 C Deck. Internal report; Blacksburg, VA, USA.
  15. Driscoll, G.G. and Slutter, R.G. (1961), "Research on Composite Design at Lehigh University", Proceedings of the National Engineering Conference, Chicago, IL, USA, pp. 18-24.
  16. Easterling, W.S., Gibbings, D.R. and Murray, T.M. (1993), "Strength of Shear Studs in Steel Deck on Composite Beams and Joists", Eng. J. AISC, 30(2), 44-55.
  17. Elkelish, M.S. and Robinson, H. (1986), "Longitudinal cracking of composite beams with ribbed metal deck", Can. J. Civ. Eng, 13(5), 733-740. https://doi.org/10.1139/l86-108
  18. Ellobody, E. and Lam, D. (2002), "Modelling of headed stud in steel-precast composite beams", Steel Compos. Struct., Int. J., 2(5), 355-378. https://doi.org/10.12989/scs.2002.2.5.355
  19. Ellobody, E. and Young, B. (2006), "Performance of shear connection in composite beams with profiled steel sheeting", J. Constr. Steel Res., 62, 682-694. https://doi.org/10.1016/j.jcsr.2005.11.004
  20. Eurocode-4 (1993), Composite Beams and Columns. ECCS-Technical Committee 11; European Committee for Standardization, Brussels, Belgium.
  21. Eurocode-4 (2004), Design of Composite Steel and Concrete Structures Part 1.1; European Committee for Standardization, Brussels, Belgium.
  22. Fisher, J.W. (1970), "Design of composite beams with formed metal deck", Eng. J., AISC, 7(3), 88-96.
  23. GB50017 (2003), Code for design of Steel structures; Ministry of Housing and Urban-rural Development of the Peoples' Republic of China, Beijing, China.
  24. Goble, G.G. (1968), "Shear strength of thin flange composite specimens", Eng. J., AISC, 5(2), 62-65.
  25. Grant, J.A., Fisher, J.W. and Slutter, R.G. (1977), "Composite beams with formed steel deckk", Eng. J. AISC, 14(1), 24-43.
  26. Han, Q., Wang, Y., Xu, J. and Xing, Y. (2015), "Static behavior of stud shear connectors in elastic concrete-steel composite beams", J. Constr. Steel Res., 113, 115-126. https://doi.org/10.1016/j.jcsr.2015.06.006
  27. Hawkins, N.M. and Mitchell, D. (1984), "Seismic response of composite shear connections", J. Struct. Eng., 110(9), 2120-2136. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:9(2120)
  28. Hicks, S. and Uy, B. (2015), "AS/NZS 2327 Composite Structures: A new Standard for Steel-Concrete Composite Buildings", Proceedings of Steel Innovations Conference 2015, Auckland, New Zealand, September.
  29. Jayas, B.S. and Hosain, M.U. (1988), "Behaviour of headed studs in composite beams: push-out tests", Can. J. Civil Eng., 15(2), 240-253. https://doi.org/10.1139/l88-032
  30. Jayas, B.S. and Hosain, M.U. (1989), "Behaviour of headed studs in composite beams: full-size tests", Can. J. Civil Eng., 16(5), 712-724. https://doi.org/10.1139/l89-106
  31. Johnson, R.P. and Oehlers, D.J. (1981), "Analysis and design for longitudinal shear in composite T-beams", Proceedings of Institution of Civil Engineers, Part 2, Vol. 71, No. PT1, pp. 989-1021. https://doi.org/10.1680/iicep.1981.1735
  32. Johnson, R.P. and Yuan, H. (1997), "Resistance of Stud Shear Connectors in Troughs of Profiled Sheeting", Research Report CE 55; Warwick, UK.
  33. Johnson, R.P. and Yuan, H. (1998), "Existing Rules and New Tests for Stud Shear Connectors in Troughs of Profiled Sheeting", Proceedings of the Institution of Civil Engineers-Structures and Buildings, 128(3), 244-251. https://doi.org/10.1680/istbu.1998.30458
  34. JSCE (2007), Standard Specifications for Steel and Composite Structures: I General Provision, II Structural Planning, III Design; Japan Society of Civil Engineers, Tokyo, Japan. [In English]
  35. Kim, J.-S., Kwark, J., Joh, C., Yoo, S.-W. and Lee, K.-C. (2015), "Headed stud shear connector for thin ultrahigh-performance concrete bridge deck", J. Constr. Steel Res., 108, 23-30. https://doi.org/10.1016/j.jcsr.2015.02.001
  36. Kitoh, H. and Sonoda, K. (1990), "Forces on the Studs in a Steel Plate and Concrete Slab", Proceedings of International Association for Bridge and Structural Engineering (IABSE) Symposium, Brussels, Belgium, pp. 185-190.
  37. Lam, D. and Ellobody, E. (2005), "Behavior of headed stud shear connectors in composite beam", J. Struct. Eng., 131(1), 96-106. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:1(96)
  38. Lawson, R.M. (1992), "Shear connection in composite beams", In: Composite Construction in Steel and Concrete II, (Ed. W.S. Easterling and W.M. Kim Roddis), American Society of Civil Engineers, New York, NY, USA, pp. 81-97.
  39. Lee, P.-G., Shim, C.-S. and Chang, S.-P. (2005), "Static and fatigue behaviour of large stud shear connectors for steelconcrete composite bridges", J. Constr. Steel Res., 61(9), 1270-1285. https://doi.org/10.1016/j.jcsr.2005.01.007
  40. Lloyd, R.M. and Wright, H.D. (1990), "Shear connection between composite slabs and steel beams", J. Constr. Steel Res., 15(4), 255-285. https://doi.org/10.1016/0143-974X(90)90050-Q
  41. Lorenc, W. and Kubica, E. (2006), "Behavior of composite beams prestressed with external tendons: Experimental study", J. Constr. Steel Res., 62(12), 1353-1366. https://doi.org/10.1016/j.jcsr.2006.01.007
  42. Lu, P., Xie, X. and Shao, C. (2012), "Experimental study and numerical analysis of a composite bridge structure", Constr. Build. Mater., 30, 695-705. https://doi.org/10.1016/j.conbuildmat.2011.11.008
  43. Lyons, J.C., Easterling, W.S. and Murray, T.M. (1994), Strength of Welded Shear Studs, Report No. CE/VPI-ST 94/07; Blacksburg, VA, USA.
  44. Mainstone, R.J. and Menzies, J.B. (1967), "Shear Connectors in Steel-Concrete Composite Beams for Bridges", Concrete, 1(9), 291-302.
  45. Mirza, O. (2008), "Behaviour and design of headed stud shear connectors in composite steelconcrete beams", Ph.D. Dissertation; University of Western Sydney, Australia.
  46. Mottram, J.T. and Johnson, R.P. (1990), "Push tests on studs welded through profiled steel sheeting", The Structural Engineer, 68(10), 187-193.
  47. Nellinger, S. (2015), "On the Behaviour of Shear Stud Connections in Composite Beams with Deep Decking", Ph.D. Dissertation; University of Luxembourg, Luxembourg.
  48. Nguyen, H.T. and Kim, S.E. (2009a), "Finite element modeling of push-out tests for large stud shear connectors", J. Constr. Steel Res., 65, 1909-1920. https://doi.org/10.1016/j.jcsr.2009.06.010
  49. Nguyen, H.T. and Kim, S.E. (2009b), "Finite element modeling of push-out tests for large stud shear connectors", J. Constr. Steel Res., 65(10-11), 1909-1920. https://doi.org/10.1016/j.jcsr.2009.06.010
  50. Oehlers, D.J. (1989), "Splitting induced by shear connectors in composite beams", J. Struct. Eng., 115(2), 341-362. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:2(341)
  51. Oehlers, D.J. and Coughlan, C.G. (1986), "The shear stiffness of stud shear connections in composite beams", J. Constr. Steel Res., 6(4), 273-284. https://doi.org/10.1016/0143-974X(86)90008-8
  52. Oehlers, D.J. and Johnson, R.P. (1987), "The strength of stud shear connections in composite beams", The Structural Engineer, 65(2), 44-48.
  53. Ollgaard, J.G., Slutter, R.G. and Fisher, J.W. (1971), "Shear Strength of Stud Connectors in Lightweight and Normal-Weight Concrete", Eng. J. AISC, 8(2), 55-64.
  54. Pallares, L. and Hajjar, J.F. (2010), "Headed steel stud anchors in composite structures, Part I: Shear", J. Constr. Steel Res., 66(2), 198-212. https://doi.org/10.1016/j.jcsr.2009.08.009
  55. Pavlovic, M., Markovic, Z., Veljkovic, M. and Budevac, D. (2013), "Bolted shear connectors vs. headed studs behaviour in push-out tests", J. Constr. Steel Res., 88, 134-149. https://doi.org/10.1016/j.jcsr.2013.05.003
  56. Qi, J., Wang, J., Li, M. and Chen, L. (2017), "Shear capacity of stud shear connectors with initial damage: Experiment, FEM model and theoretical formulation", Steel Compos. Struct., Int. J., 25(1), 79-92.
  57. Qureshi, J. and Lam, D. (2012), "Behaviour of headed shear stud in composite beams with profiled metal decking", Adv. Struct. Eng., 15(9), 1547-1558. https://doi.org/10.1260/1369-4332.15.9.1547
  58. Qureshi, J., Lam, D. and Ye, J. (2011a), "The influence of profiled sheeting thickness and shear connector's position on strength and ductility of headed shear connector", Eng. Struct., 33(5), 1643-1656. https://doi.org/10.1016/j.engstruct.2011.01.035
  59. Qureshi, J., Lam, D. and Ye, J. (2011b), "Effect of shear connector spacing and layout on the shear connector capacity in composite beams", J. Constr. Steel Res., 67(4), 706-719. https://doi.org/10.1016/j.jcsr.2010.11.009
  60. Rambo-Roddenberry, M.D. (2002), "Behavior and Strength of Welded Stud Shear Connectors", Ph.D. Dissertation; University of Blacksburg, VA, USA.
  61. Rambo-Roddenberry, M.D., Easterling, W.S. and Murray, T.M. (2002), "Behavior and Strength of Welded Stud Shear Connectors-Data Report", Report No. CE/VPI-ST 02-##; Blacksburg, VA, USA.
  62. Robinson, H. (1988), "Multiple stud shear connections in deep ribbed metal deck", Can. J. Civil Eng., 15(4), 553-569. https://doi.org/10.1139/l88-076
  63. Shen, M.H. and Chung, K.F. (2017), "Experimental investigation into stud shear connections under combined shear and tension forces", J. Constr. Steel Res., 133, 434-447. https://doi.org/10.1016/j.jcsr.2017.02.021
  64. Shim, C.S. (2004), "Experiments on Limit State Design of Large Stud Shear Connectors", KSCE J. Civil Eng., 8(3), 313-318. https://doi.org/10.1007/BF02836013
  65. Shim, C.S., Lee, P.G. and Yoon, T.Y. (2004), "Static behaviour of large stud shear connectors", Eng. Struct., 26(12), 1853-1860. https://doi.org/10.1016/j.engstruct.2004.07.011
  66. Slutter, R.G. and Driscoll, G.C. (1965), "Flexural strength of steel and concrete composite beams", J. Struct. Div., 91(2), 71-99.
  67. Su, Q., Yang, G. and Bradford, M.A. (2014), "Static behaviour of multi-row Stud shear connectors in high- strength concrete", Steel Compos. Struct., Int. J., 17(6), 967-980. https://doi.org/10.12989/scs.2014.17.6.967
  68. Sublett, C.N., Easterling, W.S. and Murray, T.M. (1992), "Strength of Welded Headed Studs in Ribbed Metal Deck on Composite Joist", Report No. CE/VPI-ST 92/03.
  69. Viest, I.M. (1956), "Investigation of stud shear connectors for composite concrete and steel T-beams", J. Am. Concrete Inst., 27(8), 875-891.
  70. Wright, H.D. and Francis, R.W. (1990), "Tests on composite beams with low levels of shear connection", The Struct. Engr., 68(15), 293-298.
  71. Xu, C. and Sugiura, K. (2013), "FEM Analysis on failure development of group studs shear connectors under effects of concrete strength and stud dimension", Eng. Fail. Anal., 35, 343-354. https://doi.org/10.1016/j.engfailanal.2013.02.023
  72. Xu, C., Sugiura, K., Wu, C. and Su, Q. (2012), "Parametrical static analysis on group studs with typical push-out tests", J. Constr. Steel Res., 72, 84-96. https://doi.org/10.1016/j.jcsr.2011.10.029
  73. Xue, W., Ding, M., Wang, H. and Luo, Z. (2008), "Static behavior and theoretical model of stud shear connectors", J. Bridge Eng., 13(6), 623-634. https://doi.org/10.1061/(ASCE)1084-0702(2008)13:6(623)
  74. Xue, D., Liu, Y., Yu, Z. and He, J. (2012), "Static behavior of multi-stud shear connectors for steel-concrete composite bridge", J. Constr. Steel Res., 74, 1-7. https://doi.org/10.1016/j.jcsr.2011.09.017

Cited by

  1. Experimental study on the hybrid shear connection using headed studs and steel plates vol.37, pp.6, 2020, https://doi.org/10.12989/scs.2020.37.6.649
  2. Numerical study on the deflections of steel-concrete composite beams with partial interaction vol.38, pp.1, 2018, https://doi.org/10.12989/scs.2021.38.1.067
  3. Application of a newly puzzle shaped crestbond rib shear connector in composite beam using inverted T steel girder: An experimental study vol.79, pp.1, 2021, https://doi.org/10.12989/sem.2021.79.1.117