Carbon letters

  • Volume 26
  • /
  • Pages.51-60
  • /
  • 2018
  • /
  • 1976-4251(pISSN)
  • /
  • 2233-4998(eISSN)
Korean Carbon Society (한국탄소학회)
권호 표지
DOI QR코드

DOI QR Code

Surface modified rice husk ceramic particles as a functional additive: Improving the tribological behaviour of aluminium matrix composites

  • Cheng, Lehua (College of Chemical and Materials Engineering, Chaohu University) ;
  • Yu, Dongrui (Institute of Tribology, Hefei University of Technology) ;
  • Hu, Enzhu (Department of Chemical and Materials Engineering, Hefei University) ;
  • Tang, Yuchao (Department of Chemical and Materials Engineering, Hefei University) ;
  • Hu, Kunhong (Department of Chemical and Materials Engineering, Hefei University) ;
  • Dearn, Karl David (Department of Mechanical Engineering, School of Engineering, University of Birmingham) ;
  • Hu, Xianguo (Institute of Tribology, Hefei University of Technology) ;
  • Wang, Min (College of Chemical and Materials Engineering, Chaohu University)
  • Received : 2017.05.08
  • Accepted : 2017.12.12
  • Published : 2018.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

An electroless deposition method was used to modify the surface properties of rice husk ceramic particles (RHC) by depositing nano-nickel on the surface of the RHC (Ni-RHC). The dry tribological performances of aluminum matrix composite adobes containing different contents of RHC and Ni-RHC particles have been investigated using a micro-tribometer. Results showed that the Ni-RHC particles substantially improved both the friction and wear properties of the Ni-RHC/aluminum matrix adobes. The optimal concentration was determined to be 15 wt% for both the RHC and Ni-RHC particles. The improvements in the tribological properties of aluminum adobes including the Ni-RHC were ascribed to friction-induced peeling off of Ni coating and formation of protection layer on the wear zone, both of which led to low friction and wear volume.

Keywords

References

  1. Ikura M, Stanciulescu M, Hogan E. Emulsification of pyrolysis derived bio-oil in diesel fuel, Biomass Bioenergy, 24, 221 (2003). https://doi.org/10.1016/S0961-9534(02)00131-9.
  2. Fan X, Zhu JL, Zheng AL, Wei XY, Zhao YP, Cao JP, Zhao W, Lu Y, Chen L, You CY. Rapid characterization of heteroatomic molecules in a bio-oil from pyrolysis of rice husk using atmospheric solids analysis probe mass spectrometry, J. Anal. Appl. Pyrolysis, 115, 16 (2015). https://doi.org/10.1016/j.jaap.2015.06.012.
  3. Wu HC, Ku Y, Tsai HH, Kuo YL, Tseng YH. Rice husk as solid fuel for chemical looping combustion in an annular dual-tube moving bed reactor, Chem. Eng. J., 280, 82 (2015) . https://doi.org/10.1016/j.cej.2015.05.116.
  4. Wang L, Wang X, Zou B, Ma X, Qu Y, Rong C, Li Y, Su Y, Wang Z. Preparation of carbon black from rice husk by hydrolysis, carbonization and pyrolysis, Bioreso.Technol., 102, 8220 (2011). https://doi.org/10.1016/j.biortech.2011.05.079.
  5. Rangabhashiyam S, Anu N, Selvaraju N. Sequestration of dye from textile industry wastewater using agricultural waste products as adsorbents, J. Environ. Chem. Eng., 1, 629 (2013). https://doi.org/10.1016/j.jece.2013.07.014.
  6. Soltani N, Bahrami A, Pech-Canul MI, Gonzalez LA. Review on the physicochemical treatments of rice husk for production of advanced materials, Chem. Eng. J., 264, 899 (2015). https://doi.org/10.1016/j.cej.2014.11.056.
  7. Asim N., Emdadi Z., Mohammad M., Yarmo MA, Sopian K., Agricultural solid wastes for green desiccant applications: an overview of research achievements, opportunities and perspectives, J. Clean. Prod., 91, 26(2015). https://doi.org/10.1016/j.jclepro.2014.12.015.
  8. Jenkins BM, Global Agriculture: Industrial feedstocks for energy and materials, Encyclopedia of Agriculture and Food Systems, Academic Press, Oxford, 461 (2014). https://doi.org/10.1016/B978-0-444-52512-3.00156-X.
  9. Li Y, Ding X, Guo Y, Rong C, Wang L, Qu Y, Ma X, Wang Z, A new method of comprehensive utilization of rice husk, J. Hazard. Mater., 186, 2151 (2011). http://trove.nla.gov.au/version/164784806. https://doi.org/10.1016/j.jhazmat.2011.01.013
  10. Shibata K, Yamaguchi T, Hokkirigawa K, Tribological behavior of RH ceramics made from rice husk sliding against stainless steel, alumina, silicon carbide, and silicon nitride, Tribol. Int., 73, 187 (2014). https://doi.org/10.1016/j.triboint.2014.01.021.
  11. Shibata K, Yamaguchi T, Hokkirigawa K. Tribological behavior of polyamide 66/rice bran ceramics and polyamide 66/glass bead composites, Wear, 317, 1 (2014) . https://doi.org/10.1016/j.wear.2014.04.019.
  12. Dugarjav T, Yamaguchi T, Shibata K, Hokkirigawa K. Friction and wear properties of rice husk ceramics under dry condition, J. Mech. Sci. Technol., 24, 85 (2010). DOI: 10.1007/s12206-009-1167-9.
  13. Shibata K, Yamaguchi T, Urabe T, Hokkirigawa K. Experimental study on microscopic wear mechanism of copper/carbon/rice bran ceramics composites, Wear, 294-295, 270 (2012). https://doi.org/10.1016/j.wear.2012.07.004.
  14. Chand N, Sharma P, Fahim M. Tribology of maleic anhydride modified rice-husk filled polyvinylchloride, Wear, 269, 847 (2010). https://doi.org/10.1016/j.wear.2010.08.014.
  15. Akiyama M, Yamaguchi T, Matsumoto K., Hokkirigawa K. Friction and wear of polyamide 66 composites filled with RB ceramics particles under dry condition, Tribol. Online, 5, 87 (2010). https://doi.org/10.2474/trol.5.87.
  16. Hu E, Hu K, Xu Z, Hu X, Dearn KD, Xu Y, Xu Y, Xu L. Investigation into the morphology, composition, structure and dry tribological behavior of rice husk ceramic particles, Appl. Surf. Sci., 366C, 372 (2016). https://doi.org/10.1016/j.apsusc.2016.01.116.
  17. Hu E, Hu K, Dearn KD, Hu X, Xu Y, Yu D, Gu H, Tang Y. Tribological performance of rice husk ceramic particles as a solid additive in liquid paraffin, Tribol. Int., 103, 139 (2016). https://doi.org/10.1016/j.triboint.2016.06.035.
  18. Alanemea KK, Adewaleb TM, Olubambic PA. Corrosion and wear behaviour of Al-Mg-Si alloy matrix hybrid composites reinforced with rice husk ash and silicon carbide. J. Mater. Res. Technol., 3, 9 (2014). https://doi.org/10.1016/j.jmrt.2013.10.008.
  19. Alanemea KK, Olubambic PA. Corrosion and wear behaviour of rice husk ash-Alumina reinforced Al-Mg-Si alloy matrix hybrid composites. J. Mater. Res. Technol., 2, 188 (2013). https://doi.org/10.1016/j.jmrt.2013.02.005.
  20. Dinaharana I, Kalaiselvanb K, Muruganc N. Influence of rice husk ash particles on microstructure and tensile behavior of AA6061 aluminum matrix composites produced using friction stir processing. Compos. Commu., 3, 42 (2017). https://doi.org/10.1016/j.coco.2017.02.001.
  21. Bhav Singh B, Balasubramanian M.. Processing and properties of copper-coated carbon fibre reinforced aluminium alloy composites, J. Mater. Process. Technol., 209, 2104 (2009). https://doi.org/10.1016/j.jmatprotec.2008.05.002.
  22. Zhang Q, Wu M, Zhao W. Electroless nickel plating on hollow glass microspheres, Surf. Coat.Technol., 192, 213 (2005). https://doi.org/10.1016/j.surfcoat.2004.06.013.
  23. Wang LY, Tu JP, Chen WX, Wang YC, Liu XK, Olk C, Cheng DH, Zhang XB. Friction and wear behavior of electroless Ni-based CNT composite coatings, Wear, 254, 1289 (2003). https://doi.org/10.1016/S0043-1648(03)00171-6.
  24. Chen Y, Cao M, Xu Q, Zhu J. Electroless nickel plating on silicon carbide nanoparticles, Surf. Coat.Technol., 172, 90 (2003). https://doi.org/10.1016/S0257-8972(03)00320-7.
  25. Ted Guo ML, Tsao CYA. Tribological behavior of aluminum/SiC/nickel-coated graphite hybrid composites, Mater. Sci. Eng.: A, 333, 134 (2002). https://doi.org/10.1016/S0921-5093(01)01817-2.
  26. Li F, Yan F, Yu L, Liu W. The tribological behaviors of coppercoated graphite filled PTFE composites, Wear, 237, 33 (2000). https://doi.org/10.1016/S0043-1648(99)00303-8.
  27. Mandal D, Dutta B K, Panigrahi S C. Wear properties of copper-coated short steel fiber reinforced stir cast Al-2Mg alloy composites, Wear, 265, 930 (2008). https://doi.org/10.1016/j.wear.2008.02.001.
  28. Miguel FL, Muller R, Rosenkranz A, Mathur S, Mucklich F. Analysis and modelling of the dry-sliding friction and wear behaviour of electrodeposited Ni and Ni-matrix-nanocomposite films, Wear, 346-347, 87 (2016). https://doi.org/10.1016/j.wear.2015.11.006.
  29. Popoola API, Loto CA, Osifuye CO, Aigbodion VS, Popoola OM. Corrosion and wear properties of Ni-Sn-P ternary deposits on mild steel via electroless method, Alexandria Eng. J.. 55, 2901 (2016) https://doi.org/10.1016/j.aej.2016.06.018.
  30. Wang W., Liu X, Liu K. Surface observations of a powder layer during the damage process under particulate lubrication. Wear, 297, 841 (2013). https://doi.org/10.1016/j.wear.2012.10.020.
  31. Xu Y, Zheng X, Hu X, Yin Y, Lei T. Preparation of the electroless Ni-P and Ni-Cu-P coatings on engine cylinder and their tribological behaviors under bio-oil lubricated conditions. Surf. Coat. Technol. 258, 790 (2014). https://doi.org/10.1016/j.surfcoat.2014.07.079.
  32. Deng X, Shi X, Liu X, Huang Y, Yan Z, Yang K, Wang Y. Effect of $Ti_3SiC_2$ on tribological properties of M50 matrix self-lubricating composites from 25 to $450^{\circ}C$. J. Mater. Eng. Perform. 4, 4595 (2017). https://doi: 10.1007/s11665-017-2908-z.