참고문헌
- Ahn, K. W., Jeon, E. C., Kim, T. H., "Turning Machining Optimization using Software Based on Cutting Force Model," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 5, pp. 107-112, 2015. https://doi.org/10.14775/ksmpe.2015.14.5.107
- Kim, J. S., Lee, D. S., Wang, D. H., "Development of Coolant/Waste-oil Separating and Cooling System with Chip Treatment," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 3, pp. 16-23, 2017.
- Chang, Y.S., Kim, S.T., "Evaluation of the Economic of High Speed Machining Considering Environment Effects," Clean Technology, Vol.12, pp.182-1899, 2006.
- Marshall, J., "Effect of Operating Conditions, Physical Size and Fluid Characteristics on the Gas Separation Performance of a Linderstrom-Lang Vortex Tube," Int. J. Heat Mass Transfer, Vol.20, pp.227-231, 1977. https://doi.org/10.1016/0017-9310(77)90209-5
- Fulton, C.D., "Ranque's Tube," J. ASRE Refrigerating Eng., Vol.58, pp.473-479, 1950.
- Alimov, R.Z., "Flow Friction and Heat and Mass Transfer in a Swirled Flow," Journal of Engineering Physics and Thermophysics, Vol.10, No.4, pp.251-257,1966.
- Ahlborn, B. and Groves S., "Secondary Flow in a Vortex Tube," Fluid Dynamics Research, Vol.21, pp.73-86, 1997. https://doi.org/10.1016/S0169-5983(97)00003-8
- Kurosaka, M., "Acoustic Streaming in Swirling Flow and the Ranque-Hilsch (Vortex-Tube) Effect," J. Fluid Mech., Vol.124, pp.139-172, 1982. https://doi.org/10.1017/S0022112082002444
- Xue Y., Arjomandi, M., and Kelso, R. "A Critical Review of Temperature Separation in a Vortex Tube," Exper. Therm. Fluid. Sci., Vol.34, pp.1367, 2010. https://doi.org/10.1016/j.expthermflusci.2010.06.010
- Westley, R., "Optimum Design of a Vortex Tube for Achieving Larger Temperature Drop Ratios," Cranfield College Note 30, College of Aeronautics, 1955.
- Ting-Quan, M., Qing-Guo, Z. H. A. O., Jian, Y., Fang, Y., Chong-Fang, M. "Experimental Investigation on Energy Separation by Vortex Tubes," In 12th International Heat Transfer Conference. Grenoble, 2002.
- Promvonge, P., Eiamsa-ard, S., "Investigation on the Vortex Thermal Separation in a Vortex Tube Refrigerator," Science Asia, Vol.31, No.3, pp.215-23, 2005. https://doi.org/10.2306/scienceasia1513-1874.2005.31.215
- Marques, C. H., Isoldi, L. A., Santos, E. D. D., Rocha, L. A. O., "Constructal Design of a Vortex Tube for Several Inlet Stagnation Pressures," Thermal Engineering, Vol.11, pp.85-92, 2012.
- Gadhave, A. S., Kore, S. S. "An Experimental Study on Operating Parameter on Counter flow Vortex Tube," International Journal of Innovative Science, Engineering & Technology, Vol.2, pp.401-405, 2015.
- Skye, H. M., Nellis, G. F., Klein, S. A. "Comparison of CFD Analysis to Empirical Data in a Commercial Vortex Tube," International Journal of Refrigeration, Vol. 29, No. 1, pp.71-80, 2006. https://doi.org/10.1016/j.ijrefrig.2005.05.004
- Secchiaroli, A., Ricci, R., Montelpare, S. D'Alessandro, V., "Numerical Simulation of Turbulent Flow in a Ranque-Hilsch Vortex Tube," International Journal of Heat and Mass Transfer, Vol.52, pp.5496-5511, 2009. https://doi.org/10.1016/j.ijheatmasstransfer.2009.05.031
- Fluent, "ANSYS Fluent V.18 User Guide", USA, 2018.