DOI QR코드

DOI QR Code

A Study on Evaluation and Improvement of Sealing Performance of Duct Cap Assembly for Ice Dispenser By Nonlinear Contact Problem Analysis

비선형 접촉문제 해석을 통한 얼음 디스펜서 덕트 캡 조립체의 밀봉성능 평가 및 개선방안 연구

  • Lee, Boo-Youn (Dept. of Mechanical & Automotive Engineering, KEIMYUNG UNIV.)
  • 이부윤 (계명대학교 기계자동차공학전공)
  • Received : 2018.01.28
  • Accepted : 2018.03.06
  • Published : 2018.04.30

Abstract

Present research is to evaluate and improve the sealing performance of the duct cap assembly for the ice dispensers through structural analysis. The nonlinear contact problems to check the sealing performance were analyzed using ANSYS software. The results of the analyses related to the sealing performance: the displacement distribution, the contact condition between the cap-silicon and the case, and the pressure distribution on the contact surface, were examined and discussed. Based on the results of the existing design of the duct cap assembly, two cases of the design modifications to improve the sealing performance were introduced. By examining the results of the two cases, a final design improvement plan was proposed and analyzed. It is shown that the sealing performance of the proposed final design is much more favorable than the existing design. The method of structural analysis and design improvement of the duct cap assembly presented in this paper will help improve the sealing performance of the ice dispenser duct caps.

Keywords

References

  1. Alvarez, R. J. and Jacobus, D. W., "The Custom Ice Dispenser," IEEE Transactions on Industry and General Applications, Vol. IGA-6, No. 1, pp. 81-87, 1970. https://doi.org/10.1109/TIGA.1970.4181135
  2. Ha, J. S., "A Study on the Heat Loss Improvement in a Refrigerator Ice Dispenser by Using Reverse Heat Loss Method," Journal of Energy Engineering, Vol. 22, No. 2, pp. 105-111, 2013. https://doi.org/10.5855/ENERGY.2013.22.2.105
  3. Park, J. K., "Optimization of Heat Insulation System for a Hhousehold Refrigerator," Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 15, No. 2, pp. 95-102, 2003.
  4. Jung, D. S., "Computer Simulation of Refrigeration Cycle of Domestic Refrigerators Combined with Cabinet Heat Transfer," Proceedings of the SAREK 1993 Winter Annual Conference, pp. 88-94, 1993.
  5. Lee, M. Y., Choi, S. J. and Kim, S. U., "Evaluation on the Cycle and Adiabatic Performance of a Small Multi-Refrigeration System," Proceeding of the KSME, Autumn Annual Conference, pp. 769-774, 2003.
  6. Moon, J. H., Park, S. K., Oh, S. K. and Kim, Y. J., "Development of Thermal-Flow Analysis Program for Refrigerator Duct Systems," Proceedings of the SAREK 2003 Winter Annual Conference, pp. 393-398, 2003.
  7. Ha, J. S., Jung, K. S., Kim, T. K., Kim, K. H. and Kim, S. R., "The Effect of Gasket Shape on Heat Loss Reduction in a Refrigeration," Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 21, No. 5, pp. 305-310, 2009.
  8. Ha, J. S., "A Study on the Unsteady Temperature Characteristics at the Refrigerator Gasket," Journal of Energy Engineering, Vol. 21, No. 2, pp. 136-141, 2012.
  9. ANSYS, ANSYS User's Manual Revision 11.0, ANSYS Inc., 2007.
  10. Gent, A. N., Engineering with Rubber, 2nd Ed., Hanser Gardner Publications, Cincinnati, 2007.
  11. Kim, K. W., "A Study on Hardness and Strain Energy Function for Rubber Materials," Soonchunhyang Journal of Institute for Industrial Technology, Vol. 7, No. 1, pp. 273-279, 2001.
  12. Kim, Y, D., Study on the Test Methodology of the Material Boperries of Rubber Components and on the Prediction of the Material Property Changes of Heat Aged Rubber Components, A Thesis for MS, Seogang University, Republic of Korea, 1999.
  13. Richard, G. B. and Keith, J. N., Shigley's Mechanical Engineering Design, 9th Ed, McGraw-Hill, 2013.

Cited by

  1. Analysis of Door Height Difference and Door Flatness Difference of Built-in Side-by-Side Refrigerator Using Cabinet-Door Integrated Model vol.17, pp.5, 2018, https://doi.org/10.14775/ksmpe.2018.17.5.076