Advances in concrete construction

  • 제6권2호
  • /
  • Pages.145-157
  • /
  • 2018
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Review study towards effect of Silica Fume on the fresh and hardened properties of concrete

  • Imam, Ashhad (Department of Civil Engineering, Shepherd Institute of Engineering and Technology, Sam Higginbottom University of Agriculture, Technology & Sciences) ;
  • Kumar, Vikash (Department of Civil Engineering, Shepherd Institute of Engineering and Technology, Sam Higginbottom University of Agriculture, Technology & Sciences) ;
  • Srivastava, Vikas (Department of Civil Engineering, Shepherd Institute of Engineering and Technology, Sam Higginbottom University of Agriculture, Technology & Sciences)
  • 투고 : 2017.11.09
  • 심사 : 2018.03.05
  • 발행 : 2018.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents a review on the use of Silica Fume (SF) as a mineral admixture in the concrete. Distinctive outcome from several researches have been demonstrated here, particularly emphasizing on the fresh and hardened properties of concrete when blended with Silica Fume (Micro-silica or Nano-silica). The results showed a substantial enhancement in the mechanical properties of concrete when replaced with SF. The review also presented a brief idea of percentage replacement of SF in case of normal and high-strength concrete. A decreasing trend in workability (slump value) has been identified when there is a increase in percentage replacement of SF. It can be concluded that the optimize percentage of replacement with SF lies in the range of 8-10% particularly for compressive strength. However the variation of blending goes up to 12-15% in case of split tensile and flexure strength of concrete. The study also demonstrates the effect of silica fume on durability parameters like water absorption, permeability, sulphate attack and chloride attack.

키워드

과제정보

연구 과제 주관 기관 : Sam Higginbottom University of Agriculture Technology and Sciences (SHUATS)

참고문헌

  1. ACI 226 (1987), "Silica Fume in concrete", ACI Mater. J., 158-166.
  2. ACI 234R-96 (2000), "Guide for the use of Silica Fume in concrete", Manual of Concrete Practice, American Concrete Institute, 1-51.
  3. Ajileye, F.V. (2012), "Investigations on micro silica (silica fume) as partial cement replacement in concrete", Global J. Res. Eng. Civil Struct. Eng., 12(1), 17-23.
  4. Amarkhail, N. (2015), "Effect of silica fume on properties of high strength concrete", Int. J. Tech. Res. Appl., 32, 13-19.
  5. Amudhavall, N.K. and Mathew, J. (2012), "Effect of silica fume on strength and durability parameters of concrete", Int. J. Eng. Sci. Emerg. Technol., 3(1), 28-35.
  6. Anilkumar, P.M., Raghavendra, M. and Sudhakumar, J. (2014), "Effects of Silica fume and fly ash on durability characteristics of high performance concrete", Int. J. Emerg. Technol. Adv. Eng., 4(10), 298-303.
  7. Behnood, A. and Ziari, H. (2008), "Effects of silica fume addition and water to cement ratio on the properties of high-strength concrete after exposure to high temperatures", Cement Concrete Compos., 30, 106-112. https://doi.org/10.1016/j.cemconcomp.2007.06.003
  8. Bhanja, S. and Sengupta, B. (2005), "Influence of silica fume on the tensile strength of concrete", Cement Concrete Res., 35, 743- 747. https://doi.org/10.1016/j.cemconres.2004.05.024
  9. Chung, C.W., Shon, C.S. and Kim, Y.S. (2010), "Chloride ion diffusivity of Fly Ash and Silica Fume Concretes exposed to freez-thaw cycles", Constr. Build. Mater., 24(9), 1739-1745. https://doi.org/10.1016/j.conbuildmat.2010.02.015
  10. Detwiler, R.J. and Mehta, P.K. (1989), "Chemical and physical effects of silica fume on the mechanical behaviour of concrete", ACI Mater. J., 86(6), 609-614.
  11. Diaz, L.N. and Delvasto, S. (2005), "Effect of pozzolans on the performance of fibre-reinforced mortars", Cement Concrete Compos., 27(5), 593-598. https://doi.org/10.1016/j.cemconcomp.2004.09.010
  12. Elahi, A., Basheer, P.A.M., Nanukuttan, S.V. and Khan, Q.U.Z. (2010), "Mechanical and durability properties of high performance concretes containing supplementary cementitious materials", Constr. Build. Mater., 24, 292-299. https://doi.org/10.1016/j.conbuildmat.2009.08.045
  13. Gjorv, E.O. (1995), "Effect of Condensed Silica Fume on Steel corrosion in Concrete", ACI Mater. J., 591-598.
  14. Hanumesh, B.M., Varun, B.K. and Harish, B.A. (2015), "The mechanical properties of concrete incorporating silica fume as partial replacement of cement", Int. J. Emerg. Technol. Adv. Eng., 5(9), 270-275.
  15. Hooton, R.D. and Titherington, M.P. (2004), "Chloride resistance of high-performance concretes subjected to accelerated curing", Cement Concrete Res., 34(9), 1561-1567. https://doi.org/10.1016/j.cemconres.2004.03.024
  16. Ismeik, M. (2009), "Effect of mineral admixtures on mechanical properties of high strength concrete made with locally available materials", Jordan J. Civil Eng., 3(1), 78-90.
  17. Kadri, E.H. and Duval, R. (1998), "Influence of silica fume on the workability and compressive strength of high performance concrete", Cement Concrete Res., 28(4), 533-547. https://doi.org/10.1016/S0008-8846(98)00010-6
  18. Katkhuda, H., Hanayneh, B. and Shatarat, N. (2009), "Influence of silica fume on high strength light weight concrete", World Acad. Sci. Eng. Technol., 34, 781-788.
  19. Khan, S.U., Nuruddin, M.F., Ayub, T. and Shafiq, N. (2014), "Effects of different mineral admixtures on the properties of fresh concrete", Scientif. World J., 2014, Article ID 986567.
  20. Khater, H.M. (2013), "Effect of silica fume on the characterization of the geopolymer materials", Int. J. Adv. Struct. Eng., 5(12), 1-10. https://doi.org/10.1186/2008-6695-5-1
  21. Khayat, K.H., Vachon, M. and Lanctot, M.C. (1997), "Use of blended silica fumes cement in commercial concrete mixtures", ACI Mater. J., 94(3), 183-192.
  22. Koksal, F., Gencel, O. and Kaya, M. (2015), "Combined effect of silica fume and expanded vermiculite on properties of lightweight mortars at ambient and elevated temperatures", Constr. Build. Mater., 88, 175-187. https://doi.org/10.1016/j.conbuildmat.2015.04.021
  23. Kumar, R. and Dhaka, J. (2016), "Partial replacement of cement with silica fume and effects on concrete properties", Int. J. Technol. Res. Eng., 4(1), 86-88.
  24. Lee, S.T., Moon, H.Y. and Swamy, R.N. (2005), "Sulphate attack and role of Silica Fume in rersisting strength loss", Cement Concrete Compos., 27(1), 65-76. https://doi.org/10.1016/j.cemconcomp.2003.11.003
  25. Mazloom, M., Ramezanianpour, A.A. and Brooks, J.J. (2014), "Effect of silica fume on mechanical properties of high-strength concrete", Cement Concrete Compos., 26(4), 347-357. https://doi.org/10.1016/S0958-9465(03)00017-9
  26. Memon, F.A., Nuruddin, M.F. and Shafiq, N. (2013), "Effect of silica fume on the fresh and hardened properties of fly ash-based self-compacting geopolymer concrete", Int. J. Mine. Metal. Mater., 20(2), 205-213. https://doi.org/10.1007/s12613-013-0714-7
  27. Mohyiddeen, M. and Maya, T.M. (2015), "Effect of silica fume on concrete containing copper slag as fine aggregate", International Journal of Research in Advent Technology, Special Issue International Conference on Technological Advancements in Structures and Construction, 55-59.
  28. Nader, G. and Hamidou, D. (2007), "Strength and wear resistance of sand -replaced silica fume concrete", ACI Mater. J., 104(2), 206-214.
  29. Newman, J. and Choo, B.S. (2003), Advanced Concrete Technology: Constituent Materials, Elsevier, Burlington.
  30. Panjehpour, M., Ali, A.A.A. and Demirbog, R. (2011), "A review for characterization of silica fume and its effect on concrete properties", Int. J. Sustain. Constr. Eng. Technol., 2(2), 1-7.
  31. Perumal, K. and Sundararajan, R. (2004), "Effect of partial replacement of cement with silica fume on the strength and durability characteristics of High performance concrete", Proceedings of the 29th Conference on Our World in Concrete & Structure, Singapore.
  32. Pradhan, D. and Dutta, D. (2013), "Effect of silica fume in conventional concrete", Int. J. Eng. Res. Appl., 3(5), 1307-1310.
  33. Ramakrishnan, V. and Srinivasan, V. (1982), "Silica fume in fibre reinforced concrete", Ind. Concrete J., 326-334.
  34. Rathore, R.S. and Walia, R. (2016), "Partial replacement of OPC by silica fumes with M55 grade concrete", SSRG Int. J. Civil Eng., 3(7), 65-70.
  35. Roy, D.K.S. and Sil, A. (2012), "Effect of partial replacement of cement by silica fume on hardened concrete", Int. J. Emerg. Technol. Adv. Eng., 2(8), 472-475.
  36. Sandvik, M. and Gjorv, O.E. (1992), "Prediction of strength development for silica fume concrete", Proceedings of 4th International Conference on the Use of Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, Istanbul, Turkey, ACI Special Publication, 132, 987-996.
  37. Sasikumar, A. and Tamilvanan, K. (2016), "Experimental investigation on properties of silica fumes as a partial replacement of cement", Int. J. Innov. Res. Sci., 5(3), 4392-4395.
  38. Sekharchi, M., Rafiee, A. and Layssi, H. (2009), "Long-term chloride diffusion in Silica Fume Concrete in harsh marine climates", Cement Concrete Compos., 31, 769-775. https://doi.org/10.1016/j.cemconcomp.2009.08.005
  39. Siddique, R. and Khan, M.I. (2011), Supplementary Cementing Materials, Engineering Materials, Springer, Verlag Berlin Heidelberg.
  40. Singh, L., Kumar, A. and Singh, A. (2016), "Study on partial replacement of cement by silica fume", Int. J. Adv. Res., 4(7), 104-120.
  41. Song, H.W., Pack, S.W., Jang, J.C. and Saraswathy, V. (2010), "Estimation of permeability of Silica Fume cement concrete", Constr. Build. Mater., 24(3), 315-521. https://doi.org/10.1016/j.conbuildmat.2009.08.033
  42. Srivastava, V., Agarwal, V.C. and Kumar, R. (2012), "Effect of Silica Fume on mechanical properties of concrete", J. Acad. Indust. Res., 1(4), 176-179.
  43. Sundararaman, S. and Azhagarsamy, S. (2015), "A study on performance of concrete by partial replacement of cement with rice husk ash and silica fume", Eur. J. Adv. Eng. Technol., 2(11), 69-72.
  44. Thomas, M., Hooton, R.D., Rogers, C. and Fournier, B. (2012), "50 years old and still going strong", Concrete Int., 34(1), 35-40.
  45. Toutanji, H.A. and Ziad, B. (1999), "Effect of curing procedures on properties of silica fume concrete", Cement Concrete Res., 29, 497-501. https://doi.org/10.1016/S0008-8846(98)00197-5
  46. Turkel, S. and Altuntas, Y. (2009), "The effect of limestone powder, fly ash and silica fume on the properties of self-compacting repair mortars", Sadhana, 34(2), 331-343. https://doi.org/10.1007/s12046-009-0011-3
  47. Wong, H.S. and Razak, H.A., (2005), "Efficiency of calcined kaolin and silica fume as cement replacement material for strength performance", Cement Concrete Res., 35(4), 696-702. https://doi.org/10.1016/j.cemconres.2004.05.051
  48. Yogendran, V., Langan, B.W., Haque, M.N. and Ward, M.A. (1987), "Silica fumes in high strength concrete", ACI Mater. J., 84(2), 124-129.

피인용 문헌

  1. Comparison of the effect of lithium bentonite and sodium bentonite on the engineering properties of bentonite-cement-sodium silicate grout vol.9, pp.3, 2020, https://doi.org/10.12989/acc.2020.9.3.279
  2. Compressive strength modeling of blended concrete based on empirical and artificial neural network techniques vol.5, pp.4, 2018, https://doi.org/10.1080/24705314.2020.1783120
  3. Evaluation of mathematical models for prediction of slump, compressive strength and durability of concrete with limestone powder vol.10, pp.6, 2018, https://doi.org/10.12989/acc.2020.10.6.463
  4. Improving the flexural toughness behavior of R.C beams using micro/nano silica and steel fibers vol.11, pp.1, 2021, https://doi.org/10.12989/acc.2021.11.1.045
  5. Estimating service life of reinforced concrete structures with binders containing silica fume and metakaolin under chloride environment: durability indicators and probabilistic assessment vol.54, pp.2, 2021, https://doi.org/10.1617/s11527-021-01698-7
  6. Mass Concrete Placement of the Offshore Wind Turbine Foundation: A Statistical Approach to Optimize the Use of Fly Ash and Silica Fume vol.15, pp.1, 2021, https://doi.org/10.1186/s40069-021-00491-8