DOI QR코드

DOI QR Code

Fire resistance of high strength concrete filled steel tubular columns under combined temperature and loading

  • Tang, Chao-Wei (Department of Civil Engineering & Geomatics, Cheng Shiu University)
  • 투고 : 2017.12.10
  • 심사 : 2018.03.02
  • 발행 : 2018.04.25

초록

In recent years, concrete-filled box or tubular columns have been commonly used in high-rise buildings. However, a number of fire test results show that there are significant differences between high strength concrete (HSC) and normal strength concrete (NSC) after being subjected to high temperatures. Therefore, this paper presents an investigation on the fire resistance of HSC filled steel tubular columns (CFTCs) under combined temperature and loading. Two groups of full-size specimens were fabricated to consider the effect of type of concrete infilling (plain and reinforced) and the load level on the fire resistance of CFTCs. Prior to fire test, a constant compressive load (i.e., load level for fire design) was applied to the column specimens. Thermal load was then applied on the column specimens in form of ISO 834 standard fire curve in a large-scale laboratory furnace until the set experiment termination condition was reached. The results demonstrate that the higher the axial load level, the worse the fire resistance. Moreover, in the bar-reinforced concrete-filled steel tubular columns, the presence of rebars not only decreased the spread of cracks and the sudden loss of strength, but also contributed to the load-carrying capacity of the concrete core.

키워드

과제정보

연구 과제 주관 기관 : Architecture and Building Research Institute (ABRI)

참고문헌

  1. ACI 363R-92 (1992), State-of-the-Art Report on High-Strength Concrete, ACI Committee 363 Report, American Concrete Institute, Detroit, MI, USA.
  2. ACI-318 (2014), Building code requirements for reinforced concrete and commentary, American Concrete Institute, Farmington Hills, MI, USA.
  3. Aslani, F., Uy, B., Tao, Z. and Mashiri, F. (2015), "Predicting the axial load capacity of high-strength concrete filled steel tubular columns", Steel Compos. Struct., Int. J., 19(4), 967-993. https://doi.org/10.12989/scs.2015.19.4.967
  4. ASTM C192/C192M-16a (2016), Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory; ASTM International, West Conshohocken, PA, USA. URL: www.astm.org
  5. ASTM E119 (2008), Standard Test Methods for Fire Tests of Building Construction and Materials, American Society for Testing and Materials, Philadelphia, CA, USA.
  6. Castillo, C. and Durrani, A.J. (1990), "Effect of transient high temperature on high-strength concrete", ACI Mater. J., 87(1), 47-53.
  7. Chen, H.J., Yang, Y.C., Tang, C.W. and Peng, C.F. (2017), "Residual-Load-Bearing Capacity of High-Performance Concrete-Filled Box Columns after Fire", Sens. Mater., 29(4), 523-532.
  8. Ding, J. and Wang, Y.C. (2008), "Realistic modelling of thermal and structural behaviour of unprotected concrete filled tubular columns in fire", J. Constr. Steel Res., 64, 1086-1102. https://doi.org/10.1016/j.jcsr.2007.09.014
  9. Ekmekyapar, T. (2016), "Experimental performance of concrete filled welded steel tube columns", J. Constr. Steel Res., 117, 175-184. https://doi.org/10.1016/j.jcsr.2015.10.013
  10. EN 1992-1-2 (2004), Eurocode 2: Design of concrete structures. Part 1-2: general rules-structural fire design, European Committee for Standardization, Brussels, Belgium.
  11. EN 1994-1-2 (2005), Eurocode 4: Design of composite steel and concrete structures-Part 1-2: General-Structural fire design.
  12. Espinos, A., Hospitaler, A. and Romero, M.L. (2009), "Fire resistance of axially loaded slender concrete filled steel tubular columns", Acta Polytechnica, 49(1), 39-43.
  13. Han, L.H., Yao, G.H. and Zhao, X.L. (2005), "Tests and calculations for hollow structural steel (HSS) stub columns filled with self-consolidating concrete (SCC)", J. Constr. Steel Res., 61, 1241-1269. https://doi.org/10.1016/j.jcsr.2005.01.004
  14. Hertz, K.D. (2003), "Limits of spalling of fire-exposed concrete", Fire Safety J., 38(2), 103-116. https://doi.org/10.1016/S0379-7112(02)00051-6
  15. Hong, S. and Varma, A.H. (2009), "Analytical modeling of the standard fire behavior of loaded CFT columns", J. Constr. Steel Res., 65(1), 54-69. https://doi.org/10.1016/j.jcsr.2008.04.008
  16. Jagannath, L., Harish Kumar, N.R., Nagaraja, K.P. and Prabhakara, R. (2016), "Behaviour of normal strength concrete and high strength concrete subjected to in-plane shear", Int. J. Innov. Res. Sci. Eng. Technol., 5(7), 12242-12251.
  17. Khan, Q.S., Sheikh, M.N. and Hadi, M.N.S. (2016), "Axial compressive behaviour of circular CFFT: Experimental database and design-oriented model", Steel Compos. Struct., Int. J., 21(4), 921-947. https://doi.org/10.12989/scs.2016.21.4.921
  18. Kim, D.K., Choi, S.M., Kim, J.H., Chung, K.S. and Park, S.H. (2005), "Experimental study on fire resistance of concrete-filled steel tube column under constant axial loads", Steel Struct., 5(4), 305-313. https://doi.org/10.12989/scs.2005.5.4.305
  19. Kodur, V.K.R. (1999), "Performance-based fire resistance design of concrete-filled steel columns", J. Constr. Steel Res., 51(1), 21-36. https://doi.org/10.1016/S0143-974X(99)00003-6
  20. Kodur, V.K.R. (2007), "Guidelines for fire resistant design of concrete-filled steel HSS columns-state-of-the-art and research needs", Steel Struct., 7, 173-182.
  21. Kodur, V. (2014), "Properties of concrete at elevated temperatures", ISRN Civil Engineering Volume, Article ID 468510.
  22. Kodur, V.K.R. and Sultan, M.A. (2003), "Effect of temperature on thermal properties of high-strength concrete", J. Mater. Civil Eng., 5(2), 101-107.
  23. Kodur, V.K.R., Wang, T.C. and Cheng, F.P. (2004), "Predicting the fire resistance behavior of high strength concrete columns", Cement Concrete Compos., 26(2), 141-153. https://doi.org/10.1016/S0958-9465(03)00089-1
  24. Krzemien, K. and Hagera, I. (2009), "Assessment of concrete susceptibility to fire spalling: A report on the state-of-the-art in testing procedures", Procedia Eng., 108, 285-292.
  25. Lavanya, J. and Elangovan, R. (2017), "The structural behaviour of concrete filled steel tubular columns", Int. Res. J. Eng. Technol., 4(6), 209-215.
  26. Lie, T.T. and Kodur, V.K.R. (1996), "Fire resistance of steel columns filled with bar-reinforced concrete", ASCE J. Struct. Eng., 122(1), 30-36. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:1(30)
  27. Liew, J.Y.R. and Xiong, M. (2015), Design Guide for Concrete Filled Tubular Members with High Strength Materials to Eurocode 4, Research Publishing, Blk 12 Lorong Bakar Batu, #2-11, 349568, Singapore.
  28. Liu, Y.X., Tong, G.S. and Zhang, L. (2015), "Fire resistance and load-bearing capacity of concrete filled fire-resistant steel tubular columns with circular cross-section", J. Zhejiang Univ. (Eng. Sci.), 49(2), 208-217.
  29. Mago, N. and Hicks, S.J. (2016), "Fire behaviour of slender, highly utilized, eccentrically loaded concrete filled tubular columns", J. Constr. Steel Res., 119, 123-132. https://doi.org/10.1016/j.jcsr.2015.12.002
  30. Mundhada, A.R. and Pofale, A.D. (2015), "Effect of high temperature on compressive strength of concrete", IOSR J. Mech. Civil Eng., 12(1), 66-70.
  31. Phan, L.T. and Carino, N.J. (1998), "Review of mechanical properties of HSC at elevated temperature", J. Mater. Civil Eng., 10(1), 58-64. https://doi.org/10.1061/(ASCE)0899-1561(1998)10:1(58)
  32. Phan, L.T. and Carino, N.J. (2002), "Effects of test conditions and mixture proportions on behavior of high-strength concrete exposed to high temperatures", ACI Mater. J., 99(1), 54-66.
  33. Purkiss, J.A. (2007), Fire Safety Engineering Design of Structures, Butterworth-Heinemann, Elsevier, Oxoford, UK.
  34. Qu, X., Chen, Z., Nethercot, D.A., Gardner, L. and Theofanous, M. (2015), "Push-out tests and bond strength of rectangular CFST columns", Steel Compos. Struct., Int. J., 19(1), 21-41. https://doi.org/10.12989/scs.2015.19.1.021
  35. Sanjayan, G. and Stocks, L.J. (1993), "Spalling of high-strength silica fume concrete in fire", ACI Mater. J., 90(2), 170-173.
  36. Schaumann, P. and Kleibomer, I. (2017), "Experimental and numerical investigations of the composite behaviour in concrete-filled tubular columns with massive steel core at high temperatures", J. Struct. Fire Eng. DOI: https://doi.org/10.1108/JSFE-01-2017-0010
  37. Siddique, R. and Kaur, D. (2012), "Properties of concrete containing ground granulated blast furnace slag (GGBFS) at elevated temperatures", J. Adv. Res.arch, 3(1), 45-51. https://doi.org/10.1016/j.jare.2011.03.004
  38. Song, T.Y., Han, L.H. and Yu, H.X. (2010), "Concrete filled steel tube stub columns under combined temperature and loading", J. Constr. Steel Res., 66(3), 369-384. https://doi.org/10.1016/j.jcsr.2009.10.010
  39. Tan, K. and Nichols, J.M. (2017), "Properties of high-strength concrete filled steel tube columns", Modern Civil Struct. Eng., 1(1), 58-77. DOI: 10.22606/mcse.2017.11005
  40. Tang, C.W. (2017), "Fire resistance of high strength fiber reinforced concrete filled box columns", Steel Compos. Struct., Int. J., 23(5), 611-621. https://doi.org/10.12989/scs.2017.23.5.611
  41. Tang, C.W. and Chen, C.Y. (2017), "Fire Resistance of Concrete-Filled Box Columns Fabricated with Different Welding Methods", Sens. Mater., 29(4), 371-377.
  42. Taiwan Construction and Planning Agency (2004), Design Code and Commentary for Steel Reinforced Concrete Structures, Taipei. [In Chinese]
  43. Tao, Z., Ghannama, M., Song, T.Y. and Han, L.H. (2016), "Experimental and numerical investigation of concrete-filled stainless steel columns exposed to fire", J. Constr. Steel Res., 118, 120-134. https://doi.org/10.1016/j.jcsr.2015.11.003
  44. Uy, B. (2001), "Strength of short concrete filled high strength steel box columns", J. Constr. Steel Res., 57(1), 113-134. https://doi.org/10.1016/S0143-974X(00)00014-6
  45. Wan, C.Y. and Zha, X.X. (2016), "Nonlinear analysis and design of concrete-filled dual steel tubular columns under axial loading", Steel Compos. Struct., Int. J., 20(3), 571-597. https://doi.org/10.12989/scs.2016.20.3.571
  46. Xiong, M.X. and Liew, J.Y.R. (2016), "Mechanical behaviour of ultra-high strength concrete at elevated temperatures and fire resistance of ultra-high strength concrete filled steel tubes", Mater. Des., 104, 414-427. https://doi.org/10.1016/j.matdes.2016.05.050
  47. Zhou, X., Mou, T., Tang, H. and Fan, B. (2017), "Experimental study on ultrahigh strength concrete filled steel tube short columns under axial load", Adv. Mater. Sci. Eng. Article ID 8410895, 9 p. DOI: https://doi.org/10.1155/2017/841089

피인용 문헌

  1. Experimental and numerical investigation on post-earthquake fire behaviour of the circular concrete-filled steel tube columns vol.38, pp.1, 2018, https://doi.org/10.12989/scs.2021.38.1.017