Acknowledgement
Supported by : National Natural Science Foundation, Jiangsu Province Natural Science Foundation, Postdoctoral Science Foundation
References
- Alam, M.N., Upadhyay, N.K. and Anas, M. (2012), "Efficient finite element model for dynamic analysis of laminated composite beam", Struct. Eng. Mech., 42(4), 471-488. https://doi.org/10.12989/sem.2012.42.4.471
- Asadzadeh, E., Alam, M. and Asadzadeh, S. (2014), "Dynamic response of layered hyperbolic cooling tower considering the effects of support inclinations", Struct. Eng. Mech., 50(6), 797-816. https://doi.org/10.12989/sem.2014.50.6.797
- Babu, G.R., Rajan, S.S., Harikrishna, P., Lakshmanan, N. and Arunachalam, S. (2013), "Experimental determination of windinduced response on a model of natural draught cooling tower", Exper. Tech., 37(37), 35-46. https://doi.org/10.1111/j.1747-1567.2011.00715.x
- Berrabah, H.M., Tounsi, A.L., Semmah, A. and Bedia, E.A.A. (2013), "Comparison of various refined nonlocal beam theories for bending, vibration and buckling analysis of nanobeams", Struct. Eng. Mech., 48(3), 351-365. https://doi.org/10.12989/sem.2013.48.3.351
- BS 4485 (1996), Code of Practice for Structural Design and Construction-Water Cooling Towers.
- Cheng, X.X., Zhao, L. and Ge, Y.J. (2016), "Field measurements on flow past a circular cylinder in transcritical reynolds number regime", Acta Phys. Sin., 65(21).
- DL/T 5339-2006 (2006), Code for Hydraulic Design of Fossil Fuel Power Plants, The Ministry of Construction of China, Beijing, China.
- GB/T50102-2014 (2014), Industrial Circulating Water Cooling Design Specification, The Ministry of Construction of China, Beijing, China.
- JGJ3-2010 (2010), Technical Specification for Concrete Structures of Tall Building, The Ministry of Construction of China, Beijing, China.
- Kang, J.H. (2015), "Vibration analysis of free-fixed hyperbolic cooling tower shells", Struct. Eng. Mech., 55(4), 785-799. https://doi.org/10.12989/sem.2015.55.4.785
- Karakas, A.I., Ozgan, K. and Daloglu, A.T. (2016), "A parametric study for free vibration analysis of hyperbolic cooling towers on elastic foundation using consistent fem-vlasov model", Arch. Appl. Mech., 86(5), 869-882. https://doi.org/10.1007/s00419-015-1067-7
- Ke, S.T. and Ge, Y.J. (2014), "The influence of self-excited forces on wind loads and wind effects for super-large cooling towers", J. Wind Eng. Industr. Aerodyn., 132, 125-135. https://doi.org/10.1016/j.jweia.2014.07.003
- Ke, S.T., Ge, Y.J. and Zhao, L. (2012), "A new methodology for analysis of equivalent static wind loads on super-large cooling towers", J. Wind Eng. Industr. Aerodyn., 111(3), 30-39. https://doi.org/10.1016/j.jweia.2012.08.001
- Ke, S.T., Ge, Y.J. and Zhao, L. (2015), "Wind-induced vibration characteristics and parametric analysis of large hyperbolic cooling towers with different feature sizes", Struct. Eng. Mech., 54(5), 891-908. https://doi.org/10.12989/sem.2015.54.5.891
- Ke, S.T., Ge, Y.J., Zhao, L. and Tamura, Y. (2015), "Stability and reinforcement analysis of super large exhaust cooling towers based on a wind tunnel test", J. Struct. Eng., 141(12), 04015066. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001309
- Ke, S.T., Liang, J., Zhao, L. and Ge, Y.J. (2015), "Influence of ventilation rate on the aerodynamic interference for two IDCTs by CFD", Wind Struct., 20(3), 449-468. https://doi.org/10.12989/was.2015.20.3.449
- Khan, A.A., Alam, M.N., Rahman, N. and Wajid, M. (2016), "Finite element modelling for static and free vibration response of functionally graded beam", Lat. Am. J. Sol. Struct., 13(4), 690-714. https://doi.org/10.1590/1679-78252159
- Li, G. and Cao, W.B. (2013), "Structural analysis and optimization of large cooling tower subjected to wind loads based on the iteration of pressure", Struct. Eng. Mech., 46(5), 735-753. https://doi.org/10.12989/sem.2013.46.5.735
- Li, H.N., Tang, S.Y. and Yi, T.H. (2013), "Wind-rain-induced vibration test and analytical method of high-voltage transmission tower", Struct. Eng. Mech., 48(4), 144-150.
- Li, X. and Li, X.W. (2011), "Analysis of wind-induced dynamic response of super large cooling tower", Build. Struct., S1, 1414-1417.
- Qu, W.L., Chen, Z.H., and Xu, Y.L. (2001), "Dynamic analysis of wind-excited truss tower with friction dampers", Comput. Struct., 79(32), 2817-2831. https://doi.org/10.1016/S0045-7949(01)00151-1
- Rahman, N. and Alam, M.N. (2015), "Structural control of piezoelectric laminated beams under thermal load", J. Therm. Stress., 38(1), 69-95. https://doi.org/10.1080/01495739.2014.976138
- Sun, T.F. and Zhou, L.M. (1983), "Without ribs the elliptic wind pressure distribution of the cooling tower full size measurement and wind tunnel study", J. Air Dyn., 12(4), 12-17.
- VGB-R 610Ue (2010), Structural Design of Cooling Tower-Technical Guideline for the Structural Design, Computation and Execution of Cooling Towers.
- Yeter, B., Garbatov, Y. and Soares, C.G. (2015), "Fatigue damage assessment of fixed offshore wind turbine tripod support structures", Eng. Struct., 101, 518-528. https://doi.org/10.1016/j.engstruct.2015.07.038
- Zhao, L., Ge, Y.J. and Cao, F.C. (2008), "Equivalent beam-net design theory of aero-elastic model about hyperbolic thin-shell cooling towers and its experimental investigation", J. Vibr. Eng., 21(1), 31-37.
- Zhao, L., Ge, Y.J. and Kareem, A. (2017), "Fluctuating wind pressure distribution around full-scale cooling towers", J. Wind Eng. Industr. Aerodyn., 165, 34-45. https://doi.org/10.1016/j.jweia.2017.02.016
- Zhou, X., Niu, H.W., Chen, Z.Q. and Wang, Z.Y. (2014), "Study on interference effect of cooling towers under condition of tower-tower and hilly surroundings", J. Build. Struct., 35(12), 140-148.
- Zhu, J.N., Xu, Y.Z. and Li, X. (2013), "Stochastic wind-induced dynamic response analysis of large hyperbolic cooling tower", J. Xi'an Univ. Architect. Technol., 45(6), 808-812.
Cited by
- Studies on the influence factors of wind dynamic responses on hyperbolic cooling tower shells vol.72, pp.5, 2019, https://doi.org/10.12989/sem.2019.72.5.541