DOI QR코드

DOI QR Code

전류 리플 저감을 위한 듀얼 인덕터 방식의 양방향 dc-to-dc 컨버터

Bidirectional dc-to-dc Converter Employing Dual Inductor for Current Ripple Reduction

  • Lee, Gi Yeong (Dept. of Control and Instrumentation Engineering, Hanbat National University) ;
  • Kang, Feel-soon (Dept. of Electrical and Electronic Engineering, Hanbat National University)
  • 투고 : 2017.10.16
  • 심사 : 2018.03.27
  • 발행 : 2018.04.01

초록

This paper propose a bidirectional dc-to-dc converter employing dual inductor for current ripple reduction. Conventional bidirectional dc-to-dc converter uses a single inductor for two different modes; boost and buck; therefore it is difficult to satisfy the optimized inductance value for each mode. To improve this problem, the proposed converter adds two switches, a diode, and one inductor. By proper switching of the additional switch, the proposed converter operates with a inductor in boost mode, but it works with dual inductor in buck mode. Hence in both modes the proposed bidirectional converter can be operated with optimized inductance values. Most of all the optimized inductance in buck mode can reduce the current ripple and its effective value(rms), which are directly related to the temperature increase resulted in short lifetime of battery. To verify the validity of the proposed approach, we first analyzes the operation of the proposed converter theoretically, and implement computer-aided simulations and experiments using a prototype.

키워드

참고문헌

  1. Y. I. Park, "Hybrid Vehicle III," Trans. on KSAE, vol. 26, no. 4, pp. 92-102, 2004.
  2. K. S. Kim, et. al., "Green Car Electric Power System," KIPE technology Report. pp. 1-26, 2010.
  3. G. Zorpette, "The smart hybrid," IEEE Spectrum, vol. 41, no. 1, pp. 44-47, 2004. https://doi.org/10.1109/MSPEC.2004.1317877
  4. A. Y. Saber and G. K. Venayagamoorthy, "Plug-in vehicles and renew-able energy sources for cost and emission reductions," IEEE Trans. Ind. Elec., vol. 58, no. 4, pp. 1229-1238, 2011. https://doi.org/10.1109/TIE.2010.2047828
  5. A. Hajimiragha, C. A., M. W. Fowler, and A. Elkamel, "Optimal transition to plug-in hybrid electric vehicles in Ontario, Canada, considering the electricity-grid limitations," IEEE Trans. Ind. Elec., vol. 57, no. 2, pp. 690-701, 2011. https://doi.org/10.1109/TIE.2009.2025711
  6. Y. J. Lee, A. K. Khaligh, and A. Emdi, "Advanced integrated bidirectional ac/dc and dc/dc converter for plug-in hybrid electric vehicles," IEEE Trans. on Vehi. Tech., vol. 58, no. 8, pp. 3970-3980, 2009. https://doi.org/10.1109/TVT.2009.2028070
  7. J. Y. Yang, C. W. Yeon, S. S. Park, S. W. Choi, R. K. Park, and S. G. Jang, "Design of a 49kW high efficiency bidirectional DC-DC converter for charge and discharge of high voltage battery in HEV," in KIPE Proc. Nov. 2007, pp. 21-23.
  8. Toyota Environmental Technology Report, Toyota Hybrid System THS II.
  9. M. T. Tsai, D. Dhen, C. J. Chen, C. H. Chiu and W. H. Chang, "Modeling and Design of Current Balancing Control in Voltage-Mode Multiphase Interleaved Voltage Regulators," IEEE Power Electronics Conference, pp. 881-887, June 2010.
  10. J. C. Yoo, "Modeling and Experiments for the Breakdown of Fuel Consumption in a Hybrid Electric Vehicle," Master Thesis of Mechanical Eng., Ajou Univ., 2002.
  11. S. Delprat, J. Lauber, T. M. Guerra and J. Rimaux, "Control of a Parallel Hybrid Powertrain : Optimal Control," IEEE Trans. on Vehi. Tech., vol. 53, no. 3, pp. 872-881, May. 2004.
  12. J. Moreno, M. E. Ortuzar and J. W. Dixon, "Energy-Management System for a Hybrid Electric Vehicle, Using Ultracapacitors and Neural Networks," IEEE Trans. on Ind. Elec., vol. 53, no. 2, pp. 614-623, Apr. 2006. https://doi.org/10.1109/TIE.2006.870880
  13. A. Jossen, "Fundamentals of battery dynamic," Journal of Power Source, vol. 154, no. 2, pp. 530-538, Mar. 2006. https://doi.org/10.1016/j.jpowsour.2005.10.041
  14. J. H. Zhang, J. S. Lai, R. Y. Kim, and W. S. Yu, "High-power density design of a soft-switching high-power bidirectional DC-DC converter," IEEE Trans. on Power Elec., vol. 22, no. 4, pp. 1145-1153, July 2007.
  15. J. B. Baek, W. I. Choi, and B. H. Cho, "Digital adaptive frequency modulation for bidirectional DC-DC converter," IEEE Trans. on Ind. Elec., vol. 60, no. 11, pp. 5167-5176, Nov. 2013. https://doi.org/10.1109/TIE.2012.2224075
  16. W. J. Lee, J. K. Eom, B. M. Han, and H. J. Cha, "Design and experiment of three-phase interleaved DC-DC converter for 5kW lead-acid battery charger," Journal of Power Electronics, vol. 16, no. 3, pp. 227-233, Jun. 2011.
  17. J. H. Jung, B. G. Seo, C. K. Keun, E. C. Nho, I. D. Kim, H. G. Kim, and T. W. Chun, "New soft-switching method of 3-phase interleaved bidirectional DC-DC converter for battery charging and discharging," Journal of Power Electronics, vol. 19, no. 4, pp. 383-390, Aug. 2014.
  18. N. Liqin, D. J. Patterson, and J. L. Hudgins, "High power current sensorless 16-phase interleaved DC-DC converter for hybrid vehicle application," IEEE Trans. on Power Elect., vol. 27, no. 3, pp. 1141-1151, Mar. 2012. https://doi.org/10.1109/TPEL.2011.2165297
  19. R. K. Singh, "A Magnetically Coupled Feedback-Clamped Optimal Bidirectional Battery Charger," IEEE Trans. on Magnetics, vol. 60, no 2, Feb. 2013.
  20. C. Zheng, Y. Park, W. Lim, S. W. Cha, "A Study on Battery SOC Estimation by Regenerative Breaking in Electric Vehicles," Trans. of KSAE, vol. 20, no. 1, pp 119-123, 2012.