Smart Structures and Systems

  • 제21권4호
  • /
  • Pages.421-433
  • /
  • 2018
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Recognition of damage pattern and evolution in CFRP cable with a novel bonding anchorage by acoustic emission

  • Wu, Jingyu (Key Lab of Structures Dynamic Behavior and Control of the Ministry of Education, Harbin Institute of Technology) ;
  • Lan, Chengming (School of Civil and Resource Engineering, University of Science & Technology Beijing) ;
  • Xian, Guijun (Key Lab of Structures Dynamic Behavior and Control of the Ministry of Education, Harbin Institute of Technology) ;
  • Li, Hui (Key Lab of Structures Dynamic Behavior and Control of the Ministry of Education, Harbin Institute of Technology)
  • 투고 : 2017.08.06
  • 심사 : 2018.03.05
  • 발행 : 2018.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

Carbon fiber reinforced polymer (CFRP) cable has good mechanical properties and corrosion resistance. However, the anchorage of CFRP cable is a big issue due to the anisotropic property of CFRP material. In this article, a high-efficient bonding anchorage with novel configuration is developed for CFRP cables. The acoustic emission (AE) technique is employed to evaluate the performance of anchorage in the fatigue test and post-fatigue ultimate bearing capacity test. The obtained AE signals are analyzed by using a combination of unsupervised K-means clustering and supervised K-nearest neighbor classification (K-NN) for quantifying the performance of the anchorage and damage evolutions. An AE feature vector (including both frequency and energy characteristics of AE signal) for clustering analysis is proposed and the under-sampling approaches are employed to regress the influence of the imbalanced classes distribution in AE dataset for improving clustering quality. The results indicate that four classes exist in AE dataset, which correspond to the shear deformation of potting compound, matrix cracking, fiber-matrix debonding and fiber fracture in CFRP bars. The AE intensity released by the deformation of potting compound is very slight during the whole loading process and no obvious premature damage observed in CFRP bars aroused by anchorage effect at relative low stress level, indicating the anchorage configuration in this study is reliable.

키워드

과제정보

연구 과제 주관 기관 : NSFC

참고문헌

  1. Abdi, H. and Williams, L.J. (2010), "Principal component analysis", Wiley Interdisciplinary Reviews: Computational Statistics, 2(4), 433-459. https://doi.org/10.1002/wics.101
  2. Alrabea, A., Senthilkumar, A.V., Al-Shalabi, H. and Bader, A. (2013), "Enhancing K-means algorithm with initial cluster centers derived from data partitioning along the data axis with PCA", J. Adv. Comput. Netw., 1(2), 137-142.
  3. de Groot, P.J., Wijnen, P.A.M. and Jansen, R.B.F. (1995), "Real-time frequency determination of acoustic emission for different fracture mechanisms in carbon/epoxy composites", Compos. Sci. Technol., 55(4), 405-412. https://doi.org/10.1016/0266-3538(95)00121-2
  4. Ding, C. and He, X.F. (2004), "K-means clustering via principal component analysis", Proceedings of the International Conference on Machine Learning, Banff, Alberta, Canada.
  5. Drummond, C. and Holte, R.C. (2003), "C4.5, class imbalance, and cost sensitivity: Why under-sampling beats over-sampling", Workshop on learning from imbalanced datasets. Washington DC: Citeseer.
  6. Godin, N., Huguet, S., Gaertner, R. and Salmon, L. (2004), "Clustering of acoustic emission signals collected during tensile tests on unidirectional glass/polyester composite using supervised and unsupervised classifiers", Ndt & E Int., 37(4), 253-264. https://doi.org/10.1016/j.ndteint.2003.09.010
  7. Gutkin, R., Green, C.J., Vangrattanachai, S., Pinho, S.T., Robinson, P. and Curtis, P.T. (2011), "On acoustic emission for failure investigation in CFRP: Pattern recognition and peak frequency analyses", Mech. Syst. Signal. Pr., 25(4), 1393-1407. https://doi.org/10.1016/j.ymssp.2010.11.014
  8. Hu, Y, Guo, D.F., Fan, Z.W., Dong, C., Huang, Q.H., Xie, S.K., Liu, G.F., Tan, J., Li, B.P. and Xie, Q.W. (2015), "An improved algorithm for imbalanced data and small sample size classification", J. Data Anal. Inform. Process., 3(3), 27-33. https://doi.org/10.4236/jdaip.2015.33004
  9. Khamedi, R., Fallahi, A. and Oskouei, A.R. (2010), "Effect of martensite phase volume fraction on acoustic emission signals using wavelet packet analysis during tensile loading of dual phase steels", Mater. Design, 31(6), 2752-2759. https://doi.org/10.1016/j.matdes.2010.01.019
  10. Li, D.S., Hu, Q., Ou, J.P. and Li, H. (2011), "Fatigue damage characterization of carbon fiber reinforced polymer bridge cables: Wavelet transform analysis for clustering acoustic emission data", Sci. China. Technol. Sci., 54(2), 379-387. https://doi.org/10.1007/s11431-010-4198-7
  11. Li, L., Swolfs, Y., Straumit, L., Xiong, Y. and Lomov, S.V. (2016), "Cluster analysis of acoustic emission signals for 2D and 3D woven carbon fiber/epoxy composites", J. Compos. Mater., 50(14), 1921-1935. https://doi.org/10.1177/0021998315597742
  12. Mei, K.H., Li, Y.J. and Lu, Z.T. (2015), "Application study on the first cable-stayed bridge with CFRP cables in China", J. Traffic Transportation Eng., 2(4), 242-248. https://doi.org/10.1016/j.jtte.2015.05.004
  13. Meier, U. (2012), "Carbon fiber reinforced polymer cables: Why? Why Not? What If?", Arab. J. Sci. Eng., 37(2), 399-411. https://doi.org/10.1007/s13369-012-0185-6
  14. Meier, U. and Farshad, M. (1996), "Connecting high-performance carbon-fiber-reinforced polymer cables of suspension and cable-stayed bridges through the use of gradient materials", J. Comput-Aided. Mater. Design., 3(1-3), 379-384. https://doi.org/10.1007/BF01185676
  15. Moevus, M., Godin, N., R'Mili, M., Rouby, D., Reynaud, P., Fantozzi, G. and Farizy, G. (2008), "Analysis of damage mechanisms and associated acoustic emission in two SiCf/[Si-B-C] composites exhibiting different tensile behaviours. Part II: Unsupervised acoustic emission data clustering", Compos. Sci. Technol., 68(6), 1258-1265. https://doi.org/10.1016/j.compscitech.2007.12.002
  16. Nair, A. and Cai, C.S. (2010), "Acoustic emission monitoring of bridges: Review and case studies", Eng. Struct., 32(6), 1704-1714. https://doi.org/10.1016/j.engstruct.2010.02.020
  17. Noistering, J.F. (2000), "Carbon fibre composites as stay cables for bridges", Appl. Compos. Mater., 7(2-3), 139-150. https://doi.org/10.1023/A:1008946132034
  18. Ramirez-Jimenez, C.R., Papadakis, N., Reynolds, N., Gan, T.H., Purnell, P. and Pharaoh, M. (2004), "Identification of failure modes in glass/polypropylene composites by means of the primary frequency content of the acoustic emission event", Compos. Sci. Technol., 64(12), 1819-1827. https://doi.org/10.1016/j.compscitech.2004.01.008
  19. Rizzo, P. and di Scalea, L.F. (2001), "Acoustic emission monitoring of CFRP cables for cable-stayed bridges, 6th Annual International Symposium on NDE for Health Monitoring and Diagnostics", International Society for Optics and Photonics. 129-138.
  20. Wang, G., Wang, Z.Z., Chen, W.T. and Zhuang, J. (2006), "Classification of surface EMG signals using optimal wavelet packet method based on Davies-Bouldin criterion", Med. Biol. Eng. Comput., 44(10), 865-872. https://doi.org/10.1007/s11517-006-0100-y
  21. Wu, J. (2012), Advances in K-means Clustering A Data Mining Thinking, Springer Berlin Heidelberg, Germany.
  22. Xiong, H., Wu, J. and Chen, J. (2009), "K-means clustering versus validation measures: A data-distribution perspective", IEEE. T. Syst. Man. CY. B., 39(2), 318-331. https://doi.org/10.1109/TSMCB.2008.2004559
  23. Yang, Y.C. and Nagarajaiah, S. (2013), "Output-only modal identification with limited sensors using sparse component analysis", J. Sound Vib., 332(19), 4741-4765. https://doi.org/10.1016/j.jsv.2013.04.004
  24. Yen, S.J. and Lee, Y.S. (2009), "Cluster-based under-sampling approaches for imbalanced data distributions", Expert. Syst. Appl., 36(3), 5718-5727. https://doi.org/10.1016/j.eswa.2008.06.108
  25. Zhang, K.Y., Fang, Z., Nanni, A. and Chen, G.P. (2014), "Experimental study of a large-scale ground anchor system with FRP tendon and RPC grout medium", J. Compos. Constr., 19(4), 04014073.