Geomechanics and Engineering

  • 제14권6호
  • /
  • Pages.533-544
  • /
  • 2018
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of strength properties of cement stabilized sand mixed with EPS beads and fly ash

  • Chenari, Reza Jamshidi (Faculty of Engineering, University of Guilan) ;
  • Fatahi, Behzad (School of Civil and Environmental Engineering, Faculty of Engineering and Information Technology, University of Technology, Sydney (UTS)) ;
  • Ghorbani, Ali (Faculty of Engineering, University of Guilan) ;
  • Alamoti, Mohsen Nasiri (Faculty of Engineering, University of Guilan)
  • 투고 : 2017.07.06
  • 심사 : 2017.10.19
  • 발행 : 2018.04.30
⟨ 이전 논문 다음 논문 ⟩

초록

The importance of using materials cost effectively to enhance the strength and reduce the cost, and weight of earth fill materials in geotechnical engineering led researchers to seek for modifying the soil properties by adding proper additives. Lightweight fill materials made of soil, binder, water, and Expanded polystyrene (EPS) beads are increasingly being used in geotechnical practices. This paper primarily investigates the behavior of sandy soil, modified by EPS particles. Besides, the mechanical properties of blending sand, EPS and the binder material such as fly ash and cement were examined in different mixing ratios using a number of various laboratory studies including the Modified Standard Proctor (MSP) test, the Unconfined Compressive Strength (UCS) test, the California Bearing Ratio (CBR) test and the Direct Shear test (DST). According to the results, an increase of 0.1% of EPS results in a reduction of the density of the mixture for 10%, as well as making the mixture more ductile rather than brittle. Moreover, the compressive strength, CBR value and shear strength parameters of the mixture decreases by an increase of the EPS beads, a trend on the contrary to the increase of cement and fly ash content.

키워드

참고문헌

  1. Archuleta, L.G., Tikalsky, P.J. and Carrasquillo, R.L. (1985), "Production of concrete containing fly ash for structural applications", M.Sc. Dissertation, University of Texas at Austin, Austin, Texas, U.S.A.
  2. ASTM (2007), Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils, ASTM D1883-07e2, West Conshohocken, Pennsylvania, U.S.A.
  3. ASTM (2011), Standard Practice for Classification of Soils for Engineering Purposes, ASTM D2487-11, West Conshohocken, Pennsylvania, U.S.A.
  4. ASTM (2011), Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions, ASTM D3080/D3080M-11, West Conshohocken, Pennsylvania, U.S.A.
  5. ASTM (2012), Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/$ft^3$ (2,700 kN-m/$m^3$)), ASTM D1557-12e1, West Conshohocken, Pennsylvania, U.S.A.
  6. ASTM (2015), Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, ASTM C618-15, West Conshohocken, Pennsylvania, U.S.A.
  7. ASTM (2016), Standard Test Method for Unconfined Compressive Strength of Cohesive Soil, ASTM D2166/D2166M-16, West Conshohocken, Pennsylvania, U.S.A.
  8. Azadegan, O., Li, J. and Jafari, H. (2014), "Estimation of shear strength parameters of lime-cement stabilized granular soils from unconfined compressive tests", Geomech. Eng., 7(3), 247-261. https://doi.org/10.12989/gae.2014.7.3.247
  9. Azari, B., Fatahi, B. and Khabbaz, H. (2016), "Assessment of the elastic-viscoplastic behavior of soft soils improved with vertical drains capturing reduced shear strength of a disturbed zone", Int. J. Geomech., 16(1), 1-15.
  10. Babu, D.S., Babu, K.G. and Tiong-Huan, W. (2006), "Effect of polystyrene aggregate size on strength and moisture migration characteristics of lightweight concrete", Cement Concrete Compos., 28(6), 520-527. https://doi.org/10.1016/j.cemconcomp.2006.02.018
  11. Babu, D.S., Babu, K.G. and Wee, T.H. (2005), "Properties of lightweight expanded polystyrene aggregate concretes containing fly ash", Cement Concrete Res., 35(6), 1218-1223. https://doi.org/10.1016/j.cemconres.2004.11.015
  12. Bera, A.K. and Chakraborty, S. (2015), "Compaction and unconfined compressive strength of sand modified by class F fly ash", Geomech. Eng., 9(2), 261-273. https://doi.org/10.12989/gae.2015.9.2.261
  13. Brooks, R., Udoeyo, F.F. and Takkalapelli, K.V. (2010), "Geotechnical properties of problem soils stabilised with fly ash and limestone dust in Philadelphia", J. Mater. Civ. Eng., 23(5), 711-716. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000214
  14. Deng, A. and Feng, J. (2013), "Modeling mechanical response of cemented EPS-backfill", Proceedings of the Geo-Congress 2013: Stability and Performance of Slopes and Embankments III, San Diego, California, U.S.A., March.
  15. Deng, A. and Xiao, Y. (2010), "Measuring and modeling proportion-dependent stress-strain behavior of EPS-sand mixture 1", Int. J. Geomech., 10(6), 214-222. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000062
  16. Edincliler, A. and O zer, A.T. (2014), "Effects of EPS bead inclusions on stress-strain behaviour of sand", Geosynth., 21(2), 89-102. https://doi.org/10.1680/gein.14.00001
  17. Fatahi, B., Le, T., Fatahi, B. and Khabbaz, H. (2013), "Shrinkage properties of soft clay treated with cement and geofibers", Geotech. Geol. Eng., 31(5), 1421-1435. https://doi.org/10.1007/s10706-013-9666-y
  18. Frydman, S. (2011), "Characterizing the geotechnical properties of natural, Israeli, partially cemented sands", Geomech. Eng., 3(4), 323-337. https://doi.org/10.12989/gae.2011.3.4.323
  19. Gao, H., Liu, J. and Liu, H. (2011), "Geotechnical properties of EPS composite soil", J. Geotech. Eng., 5(1), 69-77. https://doi.org/10.3328/IJGE.2011.05.01.69-77
  20. Gullu, H. (2014), "Factorial experimental approach for effective dosage rate of stabilizer: Application for fine-grained soil treated with bottom ash", Soil. Found., 54(3), 462-477. https://doi.org/10.1016/j.sandf.2014.04.017
  21. Herki, A.B., Khatib, J.M. and Negim, E.M. (2013), "Lightweight concrete made from waste polystyrene and fly ash", World Appl. Sci. J., 21(9), 1356-1360.
  22. Jamshidi Chenari, R.J., Fard, M.K., Maghfarati, S.P., Pishgar, F. and Machado, S.L. (2016), "An investigation on the geotechnical properties of sand-EPS mixture using large oedometer apparatus", Construct. Build. Mater., 113(1), 773-782. https://doi.org/10.1016/j.conbuildmat.2016.03.083
  23. Janardhanatn, R., Burns, F. and Peindl, R.D. (1992), "Mix design for flowable fly-ash backfill material", J. Mater. Civ. Eng., 4(3), 252-263. https://doi.org/10.1061/(ASCE)0899-1561(1992)4:3(252)
  24. Kaniraj, S.R. and Havanagi, V.G. (2001), "The behavior of cement-stabilized fiber-reinforced fly ash-soil mixtures", J. Geotech. Geoenviron. Eng., 127(7), 574-584. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:7(574)
  25. Karabash, Z. and Cabalar, A.F. (2015), "Effect of tire crumb and cement addition on triaxial shear behavior of sandy soils", Geomech. Eng., 8(1), 1-15. https://doi.org/10.12989/gae.2015.8.1.001
  26. Kim, S.W. and Yun, H.D. (2013), "Influence of recycled coarse aggregates on the bond behavior of deformed bars in concrete", Eng. Struct., 48(1), 133-143. https://doi.org/10.1016/j.engstruct.2012.10.009
  27. Kogbara, R.B., Al-Tabbaa, A., Yi, Y. and Stegemann, J.A. (2013), "Cement-fly ash stabilisation/solidification of contaminated soil: Performance properties and initiation of operating envelopes", Appl. Geochem., 33(1), 64-75. https://doi.org/10.1016/j.apgeochem.2013.02.001
  28. Kolias, S., Kasselouri-Rigopoulou, V. and Karahalios, A. (2005), "Stabilisation of clayey soils with high calcium fly ash and cement", Cement Concrete Compos., 27(2), 301-313. https://doi.org/10.1016/j.cemconcomp.2004.02.019
  29. Marjive, V.R. and Ram Rathan Lal, B. (2016), "An experimental study on stone dust and EPS beads based material", Proceedings of the Geo-Chicago 2016 Conference, Chicago, Illinois, U.S.A., August.
  30. Marjive, V.R. and Rathan Lal, B. (2016), "Compressive strength behaviour of stone dust and EPS beads-based material", Proceedings of the Geotechnical and Structural Engineering Congress 2016, Phoenix, Arizona, U.S.A., February.
  31. Miao, L., Wang, F., Han, J., Lv, W. and Li, J. (2012), "Properties and applications of cement-treated sand-expanded polystyrene bead lightweight fill", J. Mater. Civ. Eng., 25(1), 86-93.
  32. Miao, L., Wang, F., Lu, W. and Li, J. (2010), "Study on cementtreated Yangtze hydraulic sand mixed with expanded polystyrenes (EPS) beads as backfill material in highway embankments", Proceedings of the GeoShanghai International Conference 2010, Shanghai, China, June.
  33. Nguyen, L. and Fatahi, B. (2016), "Behaviour of clay treated with cement & fibre while capturing cementation degradation and fibre failure-C3F model", J. Plastic., 81(1), 168-195. https://doi.org/10.1016/j.ijplas.2016.01.015
  34. Nguyen, L., Fatahi, B. and Khabbaz, H. (2017), "Development of a constitutive model to predict the behavior of cement-treated clay during cementation degradation: C3 model", Int. J. Geomech., 17(7), 1-32.
  35. Padade, A.H. and Mandal, J.N. (2014), "Expanded polystyrenebased geomaterial with fly ash", Int. J. Geomech., 14(6), 1-7. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000293
  36. Parsa-Pajouh, A., Fatahi, B. and Khabbaz, H. (2016), "Experimental and numerical investigations to evaluate twodimensional modeling of vertical drain-assisted preloading", Int. J. Geomech., 16(1), 1-14.
  37. Rezania, M. (2008), "Evolutionary polynomial regression based constitutive modelling and incorporation in finite element analysis", Ph.D. Dissertation, The University of Exeter, Exeter, U.K.
  38. Rezania, M., Javadi, A.A. and Giustolisi, O. (2008), "An evolutionary-based data mining technique for assessment of civil engineering systems", Eng. Comput., 25(6), 500-517. https://doi.org/10.1108/02644400810891526
  39. Rocco, N.T. (2012), "Characterization of expanded polystyrene (EPS) and cohesive soil mixtures", Ph.D. Dissertation, Missouri University of Science and Technology, Rolla, Missouri, U.S.A.
  40. Rocco, N.T. and Luna, R. (2013), "Mixtures of clay/EPS particulates and undrained shear strength", Proceedings of the Geo-Congress 2013: Stability and Performance of Slopes and Embankments III, San Diego, California, U.S.A., March.
  41. Rossow, M. (2003), Fly Ash Facts for Highway Engineers, Report No. FHWA-IF-03-019, Continuing Education and Development, New York, U.S.A.
  42. Shooshpasha, I. and Alijani Shirvani, R. (2015), "Effect of cement stabilization on geotechnical properties of sandy soils", Geomech. Eng., 8(1), 17-31. https://doi.org/10.12989/gae.2015.8.1.017
  43. Tsuchida, T., Porbaha, A. and Yamane, N. (2001), "Development of a geomaterial from dredged bay mud", J. Mater. Civ. Eng., 13(2), 152-160. https://doi.org/10.1061/(ASCE)0899-1561(2001)13:2(152)
  44. Yilmaz, Y., Cetin, B. and Barzegari Kahnemouei, V. (2017), "Compressive strength characteristics of cement treated sand prepared by static compaction method", Geomech. Eng., 12(6), 935-948. https://doi.org/10.12989/gae.2017.12.6.935
  45. Yoonz, G.L., Jeon, S.S. and Kim, B.T. (2004), "Mechanical characteristics of light-weighted soils using dredged materials", Mar. Georesour. Geotechnol., 22(4), 215-229. https://doi.org/10.1080/10641190490467747
  46. Zhu, W., Li, M., Zhang, C. and Zhao, G. (2008), "Density and strength properties of sand-expanded polystyrene beads mixture", Proceedings of the GeoCongress 2008: Characterization, Monitoring, and Modeling of GeoSystems, New Orleans, Louisiana, U.S.A., March.

피인용 문헌

  1. Dynamic shear modulus and damping of expanded polystyrene composite soils at low strains vol.26, pp.4, 2018, https://doi.org/10.1680/jgein.19.00029
  2. Numerical and Experimental Investigations of the Influence of Grain Size on the Compressibility of Sand-EPS Mixtures vol.5, pp.4, 2019, https://doi.org/10.1007/s40891-019-0182-x
  3. Dynamic properties of EPS-sand mixtures using cyclic triaxial and bender element tests vol.26, pp.6, 2018, https://doi.org/10.1680/jgein.19.00034
  4. A Note on the Compressibility and Earth Pressure Properties of EPS Beads-Rigid Particulates Composite vol.37, pp.6, 2019, https://doi.org/10.1007/s10706-019-00977-z
  5. Constraint Deformation Behavior of Sand-EPS Beads Mixture Using Discrete Element Modeling (DEM) vol.9, pp.1, 2018, https://doi.org/10.1520/acem20190162
  6. Effect of aluminate content in cement on the long-term sulfate resistance of cement stabilized sand vol.38, pp.7, 2020, https://doi.org/10.1080/1064119x.2019.1635235
  7. Effect of Expanded Polystyrene Particle Size on Engineering Properties of Clayey Soil vol.2021, pp.None, 2021, https://doi.org/10.1155/2021/9951915
  8. Shaking table study on sand-EPS beads-mixtures using a laminar box vol.28, pp.3, 2018, https://doi.org/10.1680/jgein.20.00039
  9. Monotonic, cyclic and post-cyclic shearing behavior of sand-EPS geofoam interface vol.28, pp.3, 2018, https://doi.org/10.1680/jgein.20.00041
  10. Effect of EPS beads in lightening a typical zeolite and cement-treated sand vol.80, pp.11, 2018, https://doi.org/10.1007/s10064-021-02458-1